The one I posted before was from the system that does not work.
Below are the new ones, from both systems. Situation hasn't changed
when using current snapshot.
==============================================
This is from NOT working system:
==============================================
OpenBSD 4.0-current (RAMDISK_CD) #102: Fri Nov 3 04:10:30 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Genuine Intel(R) CPU T2500 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2
real mem = 526217216 (513884K)
avail mem = 473546752 (462448K)
using 4256 buffers containing 26435584 bytes (25816K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ad) BIOS, date 05/10/06, BIOS32 rev. 0 @ 0xfdc74,
SMBIOS rev. 2.4 @ 0xe5860 (53 entries)
bios0: FUJITSU LifeBook T4210
pcibios0: pcibios_get_status - function not supported
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xe600! 0xce800/0x1000 0xcfa00/0x1000 0xdc000/0x1c00!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel 82801GB HD Audio" rev 0x02 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci1 at ppb0 bus 2
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8055" rev 0x12, Marvell
Yukon-2 EC Ultra rev. A1 (0x2): irq 11
msk0 at mskc0 port A, address 00:17:42:12:c8:66
eephy0 at msk0 phy 0: Marvell 88E1149 Gigabit PHY, rev. 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 5
ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: irq 11
ar5k_ar5212_nic_wakeup: failed to resume the AR5212 (again)
ath0: unable to attach hardware; HAL status 22
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: irq 11
ehci0: timed out waiting for BIOS
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 8
cbb0 at pci4 dev 3 function 0 vendor "O2 Micro", unknown product 0x7134 rev
0x20: irq 11
cbb1 at pci4 dev 3 function 1 vendor "O2 Micro", unknown product 0x7134 rev
0x20pci_intr_map: no mapping for pin A
: couldn't map interrupt
vendor "O2 Micro", unknown product 0x7120 (class system subclass SD Host
Controller, rev 0x00) at pci4 dev 3 function 2 not configured
vendor "O2 Micro", unknown product 0x7130 (class bridge subclass miscellaneous,
rev 0x00) at pci4 dev 3 function 3 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 9 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, DW-224E-C, 4.AA> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM AHCI SATA" rev 0x02: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using irq 11 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <FUJITSU MHV2080BH PL>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
"Intel 82801GB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask fffd netmask fffd ttymask ffff
rd0: fixed, 3800 blocks
umass0 at uhub4 port 1 configuration 1 interface 0
umass0: LEXAR MEDIA JUMPDRIVE TRAVELER, rev 2.00/20.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <LEXAR, JUMPDRIVE TRAVEL, 2000> SCSI0 0/direct
removable
sd0: 493MB, 493 cyl, 64 head, 32 sec, 512 bytes/sec, 1010784 sec total
vendor 0x0c24 product 0x000f, class 224/1, rev 2.00/19.15, addr 2, uhub2 port 1
not configured
vendor 0x08ff Fingerprint Sensor, class 255/255, rev 1.10/6.21, addr 3, uhub2
port 2 not configured
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
===============================================================================================
This is from the system that seems to work fine
===============================================================================================
OpenBSD 4.0-current (RAMDISK_CD) #102: Fri Nov 3 04:10:30 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: AMD Opteron(tm) Processor 148 ("AuthenticAMD" 686-class, 1024KB L2
cache) 2.76 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
real mem = 1073246208 (1048092K)
avail mem = 972509184 (949716K)
using 4256 buffers containing 53784576 bytes (52524K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(0e) BIOS, date 06/23/05, BIOS32 rev. 0 @ 0xfb510,
SMBIOS rev. 2.3 @ 0xf0000 (42 entries)
bios0: MICRO-STAR INTERNATIONAL CO., LTD MS-7125
apm0 at bios0: Power Management spec V1.2
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xd9e4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd8a0/304 (17 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 18 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 3 4 5 7 10 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xf000! 0xd0000/0x4000! 0xd4000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
"NVIDIA nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: irq 5, version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: irq 10
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
"NVIDIA nForce4 AC97" rev 0xa2 at pci0 dev 4 function 0 not configured
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xf2: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 ignored (disabled)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4167B, DL13> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <SAMSUNG SP2504C>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <SAMSUNG SP2504C>
wd1: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
pciide2: using irq 11 for native-PCI interrupt
wd2 at pciide2 channel 0 drive 0: <SAMSUNG SP2504C>
wd2: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd2(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 5
wd3 at pciide2 channel 1 drive 0: <ST3160827AS>
wd3: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd3(pciide2:1:0): using PIO mode 4, Ultra-DMA mode 5
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 1
unknown vendor 0x4444 product 0x0016 (class multimedia subclass video, rev
0x01) at pci1 dev 8 function 0 not configured
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: irq 4, address
00:13:d3:66:70:ee
eephy0 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
mskc0 at pci3 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x15, Marvell
Yukon-2 EC rev. A2 (0x1): irq 5
msk0 at mskc0 port A, address 00:13:d3:66:05:f8
eephy1 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 5
vga1 at pci5 dev 0 function 0 "NVIDIA GeForce 6600" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask ffed netmask fffd ttymask ffff
rd0: fixed, 3800 blocks
umass0 at uhub1 port 5 configuration 1 interface 0
umass0: vendor 0x05e3 USB2.0 card Reader, rev 2.00/91.38, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Generic, STORAGE DEVICE, 9138> SCSI0 0/direct
removable
sd0: drive offline
sd1 at scsibus1 targ 1 lun 1: <Generic, STORAGE DEVICE, 9138> SCSI0 0/direct
removable
sd1: drive offline
sd2 at scsibus1 targ 1 lun 2: <Generic, STORAGE DEVICE, 9138> SCSI0 0/direct
removable
sd2: drive offline
sd3 at scsibus1 targ 1 lun 3: <Generic, STORAGE DEVICE, 9138> SCSI0 0/direct
removable
sd3: drive offline
umass1 at uhub1 port 9 configuration 1 interface 0
umass1: LEXAR MEDIA JUMPDRIVE TRAVELER, rev 2.00/20.00, addr 3
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets
sd4 at scsibus2 targ 1 lun 0: <LEXAR, JUMPDRIVE TRAVEL, 2000> SCSI0 0/direct
removable
sd4: 493MB, 493 cyl, 64 head, 32 sec, 512 bytes/sec, 1010784 sec total
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Kensington USB/PS2 Wheel Mouse, rev 1.10/4.00, addr 2, iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub0 port 2 configuration 1 interface 0
uhidev1: APC Back-UPS ES 750 FW:819.z2.D USB FW:z2, rev 1.10/1.06, addr 3,
iclass 3/0
uhidev1: 123 report ids
uhid at uhidev1 reportid 1 not configured
uhid at uhidev1 reportid 2 not configured
uhid at uhidev1 reportid 3 not configured
uhid at uhidev1 reportid 4 not configured
uhid at uhidev1 reportid 5 not configured
uhid at uhidev1 reportid 6 not configured
uhid at uhidev1 reportid 7 not configured
uhid at uhidev1 reportid 8 not configured
uhid at uhidev1 reportid 9 not configured
uhid at uhidev1 reportid 10 not configured
uhid at uhidev1 reportid 11 not configured
uhid at uhidev1 reportid 12 not configured
uhid at uhidev1 reportid 13 not configured
uhid at uhidev1 reportid 14 not configured
uhid at uhidev1 reportid 15 not configured
uhid at uhidev1 reportid 16 not configured
uhid at uhidev1 reportid 17 not configured
uhid at uhidev1 reportid 18 not configured
uhid at uhidev1 reportid 22 not configured
uhid at uhidev1 reportid 23 not configured
uhid at uhidev1 reportid 24 not configured
uhid at uhidev1 reportid 28 not configured
uhid at uhidev1 reportid 32 not configured
uhid at uhidev1 reportid 34 not configured
uhid at uhidev1 reportid 35 not configured
uhid at uhidev1 reportid 36 not configured
uhid at uhidev1 reportid 37 not configured
uhid at uhidev1 reportid 38 not configured
uhid at uhidev1 reportid 39 not configured
uhid at uhidev1 reportid 40 not configured
uhid at uhidev1 reportid 48 not configured
uhid at uhidev1 reportid 49 not configured
uhid at uhidev1 reportid 50 not configured
uhid at uhidev1 reportid 51 not configured
uhid at uhidev1 reportid 52 not configured
uhid at uhidev1 reportid 53 not configured
uhid at uhidev1 reportid 54 not configured
uhid at uhidev1 reportid 64 not configured
uhid at uhidev1 reportid 65 not configured
uhid at uhidev1 reportid 80 not configured
uhid at uhidev1 reportid 81 not configured
uhid at uhidev1 reportid 96 not configured
uhid at uhidev1 reportid 97 not configured
uhid at uhidev1 reportid 98 not configured
uhid at uhidev1 reportid 116 not configured
uhid at uhidev1 reportid 117 not configured
uhid at uhidev1 reportid 120 not configured
uhid at uhidev1 reportid 121 not configured
uhid at uhidev1 reportid 122 not configured
uhid at uhidev1 reportid 123 not configured
wd0: no disk label
dkcsum: wd0 matches BIOS drive 0x80
wd1: no disk label
dkcsum: wd1 matches BIOS drive 0x81
wd2: no disk label
dkcsum: wd2 matches BIOS drive 0x82
wd3: no disk label
dkcsum: wd3 matches BIOS drive 0x83
dkcsum: sd4 matches BIOS drive 0x84
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
