Hello, I can't enable an Asus WL-107G wireless card (Ralink-based) with OpenBSD 4.0 on a Compaq Presario 920EA laptop. The card works with non-BSD OS's in the same machine.
I have been told the problem actually could be the PCMCIA interface, rather than the card - I did try a different card with no results. I appreciate any help on this. The dmesg output is: OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Mobile AMD Athlon(tm) XP 2000+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.66 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 788029440 (769560K) avail mem = 710303744 (693656K) using 4256 buffers containing 39505920 bytes (38580K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(75) BIOS, date 10/24/02, BIOS32 rev. 0 @ 0xfd760, SMBIOS rev. 2.3 @ 0xdf010 (16 entries) bios0: Compaq Presario 900 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xfd760/0x8a0 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf10/208 (11 entries) pcibios0: PCI Interrupt Router at 000:07:0 ("Acer Labs M1533 ISA" rev 0x00) pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc0000/0xf000 0xdf000/0x1000! 0xe0000/0x4000! cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "ATI RS100 AGP" rev 0x13 ppb0 at pci0 dev 1 function 0 "ATI RS100 PCI" rev 0x01 pci1 at ppb0 bus 1 vga1 at pci1 dev 5 function 0 "ATI Radeon IGP 320M" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ohci0 at pci0 dev 2 function 0 "Acer Labs M5237 USB" rev 0x03: irq 11, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pcib0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00 autri0 at pci0 dev 8 function 0 "Acer Labs M5451 Audio" rev 0x02: irq 5 ac97: codec id 0x41445363 (Analog Devices AD1886A) ac97: codec features headphone, Analog Devices Phat Stereo audio0 at autri0 midi0 at autri0: <4DWAVE MIDI UART> cbb0 at pci0 dev 10 function 0 "TI PCI1410 CardBus" rev 0x02pci_intr_map: no mapping for pin A : couldn't map interrupt re0 at pci0 dev 11 function 0 "Realtek 8139" rev 0x20: chip is is in D1 power mode -- setting to D0: irq 11, address 00:0b:cd:15:bf:8a rlphy0 at re0 phy 0: RTL internal PHY "Conexant HSF 56k HSFi" rev 0x01 at pci0 dev 12 function 0 not configured ohci1 at pci0 dev 15 function 0 "Acer Labs M5237 USB" rev 0x03: irq 11, version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered pciide0 at pci0 dev 16 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <IC25N030ATCS04-0> wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-R2102, 1A16> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 alipm0 at pci0 dev 17 function 0 "Acer Labs M7101 Power" rev 0x00: 74KHz clock iic0 at alipm0 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi1 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384 pcic0 controller 0: <Intel 82365SL rev 2> has sockets A and B pcmcia0 at pcic0 controller 0 socket 0 pcic_chip_socket_enable: status c pcic_wait_ready: ready never happened, status = 0c pccom3 at pcmcia0 function 0: can't allocate i/o space pcmcia1 at pcic0 controller 0 socket 1 pcic_chip_socket_enable: status c pcic_wait_ready: ready never happened, status = 0c pccom4 at pcmcia1 function 0: can't allocate i/o space pcic0: irq 3, polling enabled biomask ef55 netmask ef55 ttymask ffdf pctr: user-level cycle counter enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 Regards, Ari Constancio