Hey list members,
i have just received my 4.0 CD Set! I am trying to install it on a
third HD i have in my computer. The problem i am facing is that the
i386 CD cannot be "seen" by the CD DRIVE. It looks like there is no CD
in the disc drive. After i insert it, i see some "beeps" in fixed
interval of time. Theses beeps occur abuot 3 to 4 times. I tried
booting the already installed openbsd and mount, but what i get is:
$ su -
Password:
Terminal type? [xterm]
# mount /cdr
mount_cd9660: /dev/cd0a on /cdr: Operation not supported by device
# exit
$
I trying reading it on my Windows XP, nothing is showed for drive D:,
just like if there was no CD inside.
Of course, what i need is just before any OS is booted, i.e., i would
like to boot the CD for a brand new installation.
Thanks in advance.
PS: Of course, i am doing all that on the same hardware: Dell
Precision Workstation 370
Here is my dmesg:
OpenBSD 3.9-stable (GENERIC) #1: Mon Nov 6 16:13:12 BRST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
real mem = 534925312 (522388K)
avail mem = 481079296 (469804K)
using 4278 buffers containing 26849280 bytes (26220K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 03/16/05, BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.2
apm0: APM get power status: unknown error code? (83)
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfeb00/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1800! 0xcd800/0x2800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82925X MCH Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82925X PCIE" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA Quadro FX 330" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1 (0x4001):
irq 11, address 00:11:11:e3:92:7e
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x03
pci3 at ppb2 bus 3
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 3
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 9
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3
pci4 at ppb3 bus 4
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 10, ICH6 AC9
7
ac97: codec id 0x41445370 (Analog Devices AD1980)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel 0 c
onfigured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PHILIPS, DVD+-RW DVD8631, CD21> SCSI0 5/cdrom rem
ovable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x03: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 5 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3808110AS>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <Maxtor 6Y080M0>
wd1: 16-sector PIO, LBA, 76293MB, 156250000 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: SMI
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask f76d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
uhub5 at uhub4 port 3
uhub5: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
uhub5: 4 ports with 4 removable, self powered, multiple transaction translators
uhidev0 at uhub5 port 3 configuration 1 interface 0
uhidev0: Dell Dell USB Mouse, rev 1.10/29.10, addr 3, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhidev1 at uhub3 port 1 configuration 1 interface 0
uhidev1: DELL DELL USB Keyboard, rev 1.10/1.04, addr 2, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub3 port 2 configuration 1 interface 0
uhidev2: American Power Conversion Back-UPS ES 600 FW:820.x1d.D USB FW:x1d, rev
1.10/0.06, addr 3, iclass 3/0
uhidev2: 98 report ids
uhid0 at uhidev2 reportid 1: input=0, output=0, feature=1
uhid1 at uhidev2 reportid 2: input=0, output=0, feature=1
uhid2 at uhidev2 reportid 3: input=0, output=0, feature=1
uhid3 at uhidev2 reportid 4: input=0, output=0, feature=1
uhid4 at uhidev2 reportid 5: input=0, output=0, feature=1
uhid5 at uhidev2 reportid 6: input=0, output=0, feature=2
uhid6 at uhidev2 reportid 7: input=2, output=0, feature=2
uhid7 at uhidev2 reportid 8: input=0, output=0, feature=2
uhid8 at uhidev2 reportid 9: input=0, output=0, feature=2
uhid9 at uhidev2 reportid 10: input=0, output=0, feature=2
uhid10 at uhidev2 reportid 11: input=0, output=0, feature=2
uhid11 at uhidev2 reportid 12: input=1, output=0, feature=1
uhid12 at uhidev2 reportid 13: input=2, output=0, feature=2
uhid13 at uhidev2 reportid 14: input=0, output=0, feature=2
uhid14 at uhidev2 reportid 15: input=0, output=0, feature=1
uhid15 at uhidev2 reportid 16: input=0, output=0, feature=2
uhid16 at uhidev2 reportid 17: input=0, output=0, feature=1
uhid17 at uhidev2 reportid 18: input=0, output=0, feature=2
uhid18 at uhidev2 reportid 20: input=0, output=0, feature=1
uhid19 at uhidev2 reportid 21: input=0, output=0, feature=2
uhid20 at uhidev2 reportid 22: input=1, output=0, feature=1
uhid21 at uhidev2 reportid 24: input=0, output=0, feature=2
uhid22 at uhidev2 reportid 25: input=0, output=0, feature=2
uhid23 at uhidev2 reportid 26: input=0, output=0, feature=2
uhid24 at uhidev2 reportid 29: input=0, output=0, feature=2
uhid25 at uhidev2 reportid 31: input=0, output=0, feature=2
uhid26 at uhidev2 reportid 32: input=0, output=0, feature=4
uhid27 at uhidev2 reportid 33: input=0, output=0, feature=1
uhid28 at uhidev2 reportid 34: input=0, output=0, feature=1
uhid29 at uhidev2 reportid 35: input=0, output=0, feature=2
uhid30 at uhidev2 reportid 36: input=0, output=0, feature=2
uhid31 at uhidev2 reportid 37: input=0, output=0, feature=2
uhid32 at uhidev2 reportid 39: input=0, output=0, feature=2
uhid33 at uhidev2 reportid 44: input=0, output=0, feature=2
uhid34 at uhidev2 reportid 46: input=0, output=0, feature=1
uhid35 at uhidev2 reportid 47: input=0, output=0, feature=1
uhid36 at uhidev2 reportid 48: input=0, output=0, feature=1
uhid37 at uhidev2 reportid 49: input=0, output=0, feature=1
uhid38 at uhidev2 reportid 50: input=0, output=0, feature=1
uhid39 at uhidev2 reportid 51: input=2, output=0, feature=2
uhid40 at uhidev2 reportid 52: input=0, output=0, feature=1
uhid41 at uhidev2 reportid 53: input=0, output=0, feature=2
uhid42 at uhidev2 reportid 54: input=0, output=0, feature=1
uhid43 at uhidev2 reportid 55: input=0, output=0, feature=1
uhid44 at uhidev2 reportid 56: input=1, output=0, feature=1
uhid45 at uhidev2 reportid 57: input=0, output=0, feature=1
uhid46 at uhidev2 reportid 58: input=0, output=0, feature=1
uhid47 at uhidev2 reportid 64: input=0, output=0, feature=1
uhid48 at uhidev2 reportid 65: input=0, output=0, feature=2
uhid49 at uhidev2 reportid 66: input=0, output=0, feature=1
uhid50 at uhidev2 reportid 69: input=0, output=0, feature=3
uhid51 at uhidev2 reportid 70: input=0, output=0, feature=1
uhid52 at uhidev2 reportid 71: input=0, output=0, feature=1
uhid53 at uhidev2 reportid 72: input=0, output=0, feature=4
uhid54 at uhidev2 reportid 81: input=0, output=0, feature=1
uhid55 at uhidev2 reportid 82: input=0, output=0, feature=2
uhid56 at uhidev2 reportid 96: input=0, output=0, feature=2
uhid57 at uhidev2 reportid 97: input=0, output=0, feature=1
uhid58 at uhidev2 reportid 98: input=0, output=0, feature=4
wd0: no disk label
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd1a
rootdev=0x10 rrootdev=0x310 rawdev=0x312
zophie patch: function enabled
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
