Hello! :-) I try to set a register using the package pciutils-2.2.1.tgz to switch "server mode" on (automatic reboot after power failture) on an Apple Mac mini (Intel), though it doesn't work so far.
Basically I use -current with a GENERIC.MP kernel, but with ACPI enabled: # cat /usr/src/sys/arch/i386/conf/GENERIC.ACPI # $OpenBSD$ # # GENERIC.ACPI - sample ACPI kernel # include "arch/i386/conf/GENERIC" option MULTIPROCESSOR # Multiple processor support option MPVERBOSE cpu* at mainbus? ioapic* at mainbus? option ACPIVERBOSE option ACPI_ENABLE acpi0 at mainbus? acpitimer* at acpi? acpihpet* at acpi? acpiac* at acpi? acpibat* at acpi? acpibtn* at acpi? acpicpu* at acpi? acpiec* at acpi? acpitz* at acpi? acpimadt* at acpi? acpiprt* at acpi? I tried it also with a -release installation with GENERIC kernel and a -current installation with GENERIC kernel, both with the same results. machdep.allowaperture is set to 2 in /etc/sysctl.conf as it should be. lspci works fine: # lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) 00:07.0 Performance counters: Intel Corporation Unknown device 27a3 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 22) 02:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device 001c (rev 01) 03:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61) Reading the register works also fine: # setpci -v -s 0:1f.0 a4 00:1f.0:a4 = 01 But if I try to write to the register, I get this error: # setpci -v -s 0:1f.0 a4=0 setpci: obsd_write: ioctl(PCIOCWRITE) failed I also compiled the pciutils-2.2.4 from the ports tree using this patch: http://marc.theaimsgroup.com/?l=openbsd-ports&m=116423351620351&w=2 # setpci --version setpci version 2.2.4 Again, same results. Reading works fine, writing doesn't work. What did I miss? Does anybody of you uses the pciutils and knows this error? What could I try to make writing to the register work? Thank you in advance for your help! Tas. My DMESG (with ACPI enabled): OpenBSD 4.0-current (GENERIC.ACPI) #0: Fri Nov 24 22:24:04 CET 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.ACPI cpu0: Genuine Intel(R) CPU 1400 @ 1.83GHz ("GenuineIntel" 686-class) 1.84 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2 real mem = 2114367488 (2064812K) avail mem = 1920389120 (1875380K) using 4256 buffers containing 105840640 bytes (103360K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 07/29/05, SMBIOS rev. 2.4 @ 0xe73f0 (39 entries) bios0: Apple Computer, Inc. Macmini1,1 pcibios at bios0 function 0x1a not configured bios0: ROM list: 0xc0000/0xe600! acpi0 at mainbus0: rev 0 acpi0: tables DSDT FACP HPET APIC MCFG ASF! SBST ECDT SSDT SSDT SSDT acpitimer0 at acpi0: 3579545 Hz, 24 bits acpi device at acpi0 from table DSDT not configured acpi device at acpi0 from table FACP not configured acpihpet0 at acpi0 table HPET: 14318179 Hz acpimadt0 at acpi0 table APIC addr 0xfee00000: PC-AT compat LAPIC: acpi_proc_id 0, apic_id 0, flags 0x1 cpu0 at mainbus0: apid 0 (boot processor) cpu0: calibrating local timer cpu0: apic clock running at 166 MHz cpu0: kstack at 0xeb62c000 for 8192 bytes cpu0: idle pcb at 0xeb62c000, idle sp at 0xeb62df98 LAPIC: acpi_proc_id 1, apic_id 1, flags 0x1 cpu1 at mainbus0: apid 1 (application processor) cpu1: Genuine Intel(R) CPU 1400 @ 1.83GHz ("GenuineIntel" 686-class) 1.84 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2 cpu1: kstack at 0xeb62e000 for 8192 bytes cpu1: idle pcb at 0xeb62e000, idle sp at 0xeb62ff98 IOAPIC: acpi_ioapic_id 1, address 0xfec00000, global_int_base 0x0 ioapic0 at mainbus0: apid 1 pa 0xfec00000, virtual wire mode, version 20, 24 pins ioapic0: duplicate apic id, remapped to apid 2 OVERRIDE: bus 0, source 0, global_int 2, flags 0 OVERRIDE: bus 0, source 9, global_int 9, flags d apic_type 4 apic_type 4 acpi device at acpi0 from table MCFG not configured acpi device at acpi0 from table ASF! not configured acpi device at acpi0 from table SBST not configured acpi device at acpi0 from table ECDT not configured acpi device at acpi0 from table SSDT not configured acpi device at acpi0 from table SSDT not configured acpi device at acpi0 from table SSDT not configured acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (RP01) acpiprt2 at acpi0: bus 2 (RP02) acpiprt3 at acpi0: bus 3 (PCIB) acpibtn0 at acpi0: PWRB acpiec0 at acpi0: Failed to register address space pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03 vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03: aperture at 0x90380000, size 0x10000000 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) vendor "Intel", unknown product 0x27a3 (class DASP subclass Time and Frequency, rev 0x03) at pci0 dev 7 function 0 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 2 int 22 (irq 11) azalia0: host: High Definition Audio rev. 1.0 azalia0: codec: Sigmatel STAC9221 (rev. 52.1), HDA version 1.0 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02 pci1 at ppb0 bus 1 mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x22, Marvell Yukon-2 EC rev. A3 (0x2): apic 2 int 16 (irq 11) msk0 at mskc0 port A, address 00:16:cb:a7:46:d0 eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02 pci2 at ppb1 bus 2 ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 2 int 17 (irq 11) ath0: AR5424 10.3 phy 6.1 rf 10.2, WORAW, address 00:17:f2:4d:21:4a uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 21 (irq 11) usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19 (irq 11) usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18 (irq 11) usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16 (irq 10) usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 21 (irq 11) usb4 at ehci0: USB revision 2.0 uhub4 at usb4 uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci3 at ppb2 bus 3 "AT&T/Lucent FW322 1394" rev 0x61 at pci3 dev 3 function 0 not configured ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-R UJ-846, FM3J> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 2 int 19 (irq 11) for native-PCI interrupt wd0 at pciide1 channel 0 drive 1: <FUJITSU MHV2080BHPL> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19 (irq 11) iic0 at ichiic0 isa0 at ichpcib0 isadma0 at isa0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 biomask fdff netmask fdff ttymask ffff ioapic0: enabling ioapic0: int0 0x10100 0x0 ioapic0: int1 0x10100 0x0 ioapic0: int2 0x10100 0x0 ioapic0: int3 0x10100 0x0 ioapic0: int4 0x10100 0x0 ioapic0: int5 0x10100 0x0 ioapic0: int6 0x10100 0x0 ioapic0: int7 0x10100 0x0 ioapic0: int8 0x10100 0x0 ioapic0: int9 0x18100 0x0 ioapic0: int10 0x10100 0x0 ioapic0: int11 0x10100 0x0 ioapic0: int12 0x10100 0x0 ioapic0: int13 0x10100 0x0 ioapic0: int14 0x40 0x0 ioapic0: int15 0x10100 0x0 ioapic0: pin 16 shares different IPL interrupts (40..50), degraded performance ioapic0: int16 0xa041 0x0 ioapic0: int17 0xa050 0x0 ioapic0: int18 0xa042 0x0 ioapic0: int19 0xa043 0x0 ioapic0: int20 0x1a100 0x0 ioapic0: int21 0xb044 0x0 ioapic0: int22 0xb090 0x0 ioapic0: int23 0x1a100 0x0 pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support uhidev0 at uhub3 port 1 configuration 1 interface 0 uhidev0: Apple Computer ADB device, rev 2.00/19.65, addr 2, iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev1 at uhub3 port 1 configuration 1 interface 1 uhidev1: Apple Computer ADB device, rev 2.00/19.65, addr 2, iclass 3/1 ums0 at uhidev1: 5 buttons wsmouse0 at ums0 mux 0 uhidev2 at uhub3 port 2 configuration 1 interface 0 uhidev2: Apple Computer, Inc. IR Receiver, rev 2.00/1.10, addr 3, iclass 3/0 uhidev2: 38 report ids uhid0 at uhidev2 reportid 36: input=4, output=0, feature=0 uhid1 at uhidev2 reportid 37: input=4, output=0, feature=0 uhid2 at uhidev2 reportid 38: input=4, output=0, feature=0 dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 cpu1: starting, init idle stack ptr is 0xeb62ff98 cpu1: CPU at apid 1 running
