Hi, a friend of mine bought himself a MSI US54SE 11g USB Wlan stick. I plugged it in and it gets recognized as zyd0.
Just wanted to tell you, so you could add it to list shown in the man page. I attached a dmesg. If you want more information, feel free to mail me. (If you want to email me, please CC me as I'm not subscribed to misc@). -- simon
OpenBSD 4.0-current (GENERIC) #1244: Wed Nov 29 09:22:42 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 299 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 133591040 (130460K)
avail mem = 114376704 (111696K)
using 1661 buffers containing 6803456 bytes (6644K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(3a) BIOS, date 05/12/99, BIOS32 rev. 0 @ 0xfd820
apm at bios0 function 0x15 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd880/0x800
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf9e30/96 (4 entries)
pcibios0: PCI Exclusive IRQs: 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xa000
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x02
cbb0 at pci0 dev 2 function 0 "TI PCI1250 CardBus" rev 0x02: irq 11
cbb1 at pci0 dev 2 function 1 "TI PCI1250 CardBus" rev 0x02: irq 11
vga1 at pci0 dev 3 function 0 "Neomagic Magicgraph NM2160" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DARA-212000>
wd0: 16-sector PIO, LBA, 11509MB, 23572080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SANYO, CRD-S372B, 1.24> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x01: SMI
iic0 at piixpm0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.02
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask efcd netmask efcd ttymask ffcf
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
zyd0 at uhub0 port 1 configuration 1 interface 0
zyd0: ZyDAS USB2.0 WLAN, rev 2.00/48.10, addr 2
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
WARNING: clock time much less than file system time
WARNING: using file system time
WARNING: CHECK AND RESET THE DATE!
firmware size=5120
loading firmware block: len=4096, addr=0xee00
loading firmware block: len=1024, addr=0xf600
regulatory domain 30
firmware base address=0xf7c9
zyd0: HMAC ZD1211B, FW 47.25, RF AL2230, PA 0, address 00:02:72:5b:7a:8a
setting MAC address to 00:02:72:5b:7a:8a
setting encryption type
zyd0: RX status indicated error (90)
retry intr: rate=0x19 addr=00:13:f7:1d:ab:d1 count=1 (0x1)
retry intr: rate=0x19 addr=00:13:f7:1d:ab:d1 count=1 (0x1)
retry intr: rate=0x19 addr=00:13:f7:1d:ab:d1 count=1 (0x1)
zyd0: xfer too short (length=8)
retry intr: rate=0x19 addr=00:13:f7:1d:ab:d1 count=1 (0x1)
zyd0: xfer too short (length=8)
zyd0: xfer too short (length=8)
retry intr: rate=0x1a addr=00:13:f7:1d:ab:d1 count=1 (0x1)
retry intr: rate=0x1a addr=00:13:f7:1d:ab:d1 count=1 (0x1)
zyd0: xfer too short (length=8)
zyd0: RX status indicated error (90)
retry intr: rate=0x3 addr=00:13:f7:1d:ab:d1 count=1 (0x1)
pgpjky1KcPoX7.pgp
Description: PGP signature
