The 'ifconfig ral0 debug' printout when the client device gets time out.
ral0: begin active scan
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 12
ral0: received probe_resp from 00:13:f7:2a:f4:ab rssi 119
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 13
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 14
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 1
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 2
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 3
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 4
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 5
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 6
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 7
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 8
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 9
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 10
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 11
ral0: end active scan
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 12
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 13
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 14
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 1
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 2
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 3
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 4
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 5
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 6
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 7
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 8
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 9
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 10
ral0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 11
ral0: end active scan
ral0: end passive scan
ral0: received beacon from 00:13:f7:2a:f4:ab rssi 117
ral0: end passive scan
ral0: sending auth to 00:13:f7:2a:f4:ab on channel 11
ral0: device timeout
And this is what I get on the AP
ral0: received auth from 00:13:f7:1e:a7:86 rssi 119
ral0: sending auth to 00:13:f7:1e:a7:86 on channel 11
ral0: station 00:13:f7:1e:a7:86 newly authenticated (open)
But for some reason that doesn't seem to arrive.
I'm not buying that it is a bad Ralink radio
(http://marc.theaimsgroup.com/?l=openbsd-misc&m=116570938017614&w=2)
since when I do get a connection, the range is acceptable.
/Markus
Markus Bergkvist wrote:
I have not yet been able to get a debug print from client ral when it is
failing, is there a way to set that in hostname.if? If the device is not
failing during boot, it is hard to get it to fail.