Has anyone else seen negative temperature sensor readings through
sysctl?
hw.sensors.0=ipmi0, Temp, -54.00 degC, OK
hw.sensors.1=ipmi0, Temp, -51.00 degC, OK
hw.sensors.2=ipmi0, Temp, 40.00 degC, WARNING
OpenBSD 4.0 (GENERIC.MP) #967: Sat Sep 16 20:38:15 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2146729984 (2096416K)
avail mem = 1834881024 (1791876K)
using 22937 buffers containing 214880256 bytes (209844K) of memory
mainbus0 (root) bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x7ffbc000 (62
entries)
bios0: Dell Inc. PowerEdge 2950
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (DELL PE 01B2 )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz, 1596.14 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: apic clock running at 265MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz, 1595.93 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu1: 4MB 64b/line 16-way L2 cache
cpu2 at mainbus0: apid 7 (application processor)
cpu2: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz, 1595.94 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu2: 4MB 64b/line 16-way L2 cache
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz, 1595.93 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu3: 4MB 64b/line 16-way L2 cache
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type PCI
mpbios: bus 7 is type PCI
mpbios: bus 8 is type PCI
mpbios: bus 9 is type PCI
mpbios: bus 10 is type PCI
mpbios: bus 11 is type PCI
mpbios: bus 12 is type PCI
mpbios: bus 13 is type PCI
mpbios: bus 14 is type PCI
mpbios: bus 15 is type PCI
mpbios: bus 16 is type PCI
mpbios: bus 17 is type ISA
ioapic0 at mainbus0 apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
ioapic1 at mainbus0 apid 9 pa 0xfec81000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 9 pci0 at mainbus0
bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 "Intel 5000X
Host" rev 0x12 ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 6
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 7
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 8
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc2
pci4 at ppb3 bus 9
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x11: apic 8 int 16
(irq 11), address 00:18:8b:47:5c:ad brgphy0 at bnx0 phy 1: BCM5708C
10/100/1000baseT PHY, rev. 5
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci5 at ppb4 bus 10
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 11
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
pci7 at ppb6 bus 1
ppb7 at pci7 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00
pci8 at ppb7 bus 2
mfi0 at pci8 dev 14 function 0 "Dell PERC 5" rev 0x00: apic 9 int 14
(irq 5)
mfi0: logical drives 2, version 5.0.2-0003, 256MB RAM scsibus0 at mfi0:
2 targets sd0 at scsibus0 targ 0 lun 0: <DELL, PERC 5/i, 1.00> SCSI3
0/direct fixed
sd0: 34176MB, 34176 cyl, 64 head, 32 sec, 512 bytes/sec, 69992448 sec
total
sd1 at scsibus0 targ 1 lun 0: <DELL, PERC 5/i, 1.00> SCSI3 0/direct
fixed
sd1: 138752MB, 138752 cyl, 64 head, 32 sec, 512 bytes/sec, 284164096 sec
total
ppb8 at pci7 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00
pci9 at ppb8 bus 3
ppb9 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0x12 pci10 at ppb9
bus 12 ppb10 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci11 at ppb10 bus 13
ppb11 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x12
pci12 at ppb11 bus 14
ppb12 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci13 at ppb12 bus 15
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb13 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci14 at ppb13 bus 4
ppb14 at pci14 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc2
pci15 at ppb14 bus 5
bnx1 at pci15 dev 0 function 0 "Broadcom BCM5708" rev 0x11: apic 8 int
16 (irq 11), address 00:18:8b:47:5c:ab
brgphy1 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 5 uhci0 at
pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 8 int 21 (irq
11) usb0 at uhci0: USB revision 1.0 uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 8 int
20 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 8 int
21 (irq 11)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29
function 7 "Intel 6321ESB USB" rev 0x09: apic 8 int 21 (irq 11)
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb15 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci16 at ppb15 bus 16
vga1 at pci16 dev 13 function 0 "ATI ES1000" rev 0x02 wsdisplay0 at vga1
mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev
31 function 0 "Intel 6321ESB LPC" rev 0x09 pciide0 at pci0 dev 31
function 1 "Intel 6321ESB IDE" rev 0x09: DMA, channel 0 configured to
compatibility, channel 1 configured to compatibility atapiscsi0 at
pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8084N, 1.01> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0
port 0x60/5 pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port
0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0
uhub4 at uhub3 port 5
uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
uhub4: 4 ports with 4 removable, self powered, multiple transaction
translators uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Belkin Components USB-PS2 Adapter, rev 1.10/1.20, addr 2,
iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: Belkin Components USB-PS2 Adapter, rev 1.10/1.20, addr 2,
iclass 3/1 ums0 at uhidev1: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: sd1 matches BIOS drive 0x81
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
--
Will Backman
Network Administrator
Coastal Enterprises, Inc.
