There seem to be interrupt routing issues on your box. Try booting with -c and enable acpi. You have to install a very recent snapshot for this to have a chance. Please report that dmesg to the list.
On Thu, Dec 21, 2006 at 04:44:01PM +0100, Didier Wiroth wrote: > Hello, > I got my new pc today with a MegaRAID SATA 300-8X and an asus P5WDG2 WS > Professional motherboard. > > 1) I'm not able to boot the bsd.mp kernel on amd64, when I try the > "current" amd64 bsd.mp kernel. I get the following timeout messages: > ami0: timeout ccb 18 > ami0: timeout ccb 19 > etc .... > > The standard amd64 kernel boots fine! > Any clues what the problem is? > > 2) The PC has 4gb RAM but only 3,2GB is recognized?! Is this a known issue? > > > Many thanks!!! > Kind regards, > didier > > Here the dmesg: > > OpenBSD 4.0-current (GENERIC) #787: Tue Dec 19 21:17:17 MST 2006 > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC > real mem = 3220303872 (3144828K) > avail mem = 2757578752 (2692948K) > using 22937 buffers containing 322236416 bytes (314684K) of memory > mainbus0 (root) > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0690 (74 entries) > bios0: stem manufacturer P5WDG2 WS PRO > acpi at mainbus0 not configured > cpu0 at mainbus0: (uniprocessor) > cpu0: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz, 2667.09 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,LONG > cpu0: 4MB 64b/line 16-way L2 cache > pci0 at mainbus0 bus 0: configuration mode 1 > pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x277c > rev 0xc0 > ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x277d rev > 0xc0 > pci1 at ppb0 bus 7 > vga1 at pci1 dev 0 function 0 "ATI Radeon X300" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > "ATI Radeon X300 Sec" rev 0x00 at pci1 dev 0 function 1 not configured > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 5 > azalia0: host: High Definition Audio rev. 1.0 > azalia0: codec: 0x04x/0x11d4 (rev. 2.0), HDA version 1.0 > audio0 at azalia0 > ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01 > pci2 at ppb1 bus 4 > ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 > pci3 at ppb2 bus 5 > ppb3 at pci3 dev 2 function 0 "Intel IOP331 PCIX-PCIX" rev 0x0a > pci4 at ppb3 bus 6 > ami0 at pci4 dev 14 function 0 "Symbios Logic MegaRAID SATA 4x/8x" rev > 0x0a: irq 11 > ami0: LSI 3008, 32b, FW 814D, BIOS vH431, 128MB RAM > ami0: 1 channels, 0 FC loops, 3 logical drives > scsibus0 at ami0: 40 targets > sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed > sd0: 100000MB, 100000 cyl, 64 head, 32 sec, 512 bytes/sec, 204800000 sec > total > sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct fixed > sd1: 49998MB, 49998 cyl, 64 head, 32 sec, 512 bytes/sec, 102395904 sec total > sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct fixed > sd2: 629606MB, 629606 cyl, 64 head, 32 sec, 512 bytes/sec, 1289433088 > sec total > scsibus1 at ami0: 16 targets > ppb4 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01 > pci5 at ppb4 bus 3 > mskc0 at pci5 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21, Marvell > Yukon-2 EC rev. A3 (0x2): irq 11 > msk0 at mskc0 port A, address 00:18:f3:29:a2:53 > eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2 > ppb5 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01 > pci6 at ppb5 bus 2 > vendor "Marvell", unknown product 0x6141 (class mass storage subclass > SATA, rev 0x01) at pci6 dev 0 function 0 not configured > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 3 > usb0 at uhci0: USB revision 1.0 > uhub0 at usb0 > uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10 > usb1 at uhci1: USB revision 1.0 > uhub1 at usb1 > uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 10 > usb2 at uhci2: USB revision 1.0 > uhub2 at usb2 > uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 5 > usb3 at uhci3: USB revision 1.0 > uhub3 at usb3 > uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 3 > usb4 at ehci0: USB revision 2.0 > uhub4 at usb4 > uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1 > uhub4: 8 ports with 8 removable, self powered > ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1 > pci7 at ppb6 bus 1 > "TI TSB43AB22 FireWire" rev 0x00 at pci7 dev 3 function 0 not configured > skc0 at pci7 dev 5 function 0 "Marvell Yukon 88E8001/8003/8010" rev > 0x14, Marvell Yukon Lite (0x9): irq 5 > sk0 at skc0 port A, address 00:18:f3:29:a2:54 > eephy1 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5 > pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01 > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, > channel 0 configured to compatibility, channel 1 configured to compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus2 at atapiscsi0: 2 targets > cd0 at scsibus2 targ 0 lun 0: <_NEC, DVD_RW ND-4571A, 1-01> SCSI0 > 5/cdrom removable > atapiscsi1 at pciide0 channel 0 drive 1 > scsibus3 at atapiscsi1: 2 targets > cd1 at scsibus3 targ 0 lun 0: <TSSTcorp, DVD-ROM SH-D162C, TS04> SCSI0 > 5/cdrom removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > cd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 disabled (no drives) > pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide1: using irq 11 for native-PCI interrupt > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev > 0x01pci_intr_map: no mapping for pin B (line=00) > : polling > iic0 at ichiic0 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pmsi0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pmsi0 mux 0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > lm0 at isa0 port 0x290/8: unknown Winbond chip (ID 0xc1) > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > dkcsum: sd0 matches BIOS drive 0x80 > dkcsum: sd1 matches BIOS drive 0x81 > dkcsum: sd2 matches BIOS drive 0x82 > root on sd0a > rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
