Spoke too soon. I lost my network. I can ping localhost, but that is about it.
Randy On 12/21/06, Randy Sato <[EMAIL PROTECTED]> wrote: > > The non-mp kernel with and without ACPI seemed to work. The mp with ACPI > kernel would only boot after I changed my BIOS SATA emulation setting to > "combined IDE controller". Previously I had it set to "separate IDE > controller" and the kernel only booted part way before I got timeout errors > probing the disk. So far using "combined IDE controller, with a MP and ACPI > enabled kernel seems to be working fine. > > Not related, FYI, with the SATA emulation mode set to "RAID+AHCI", the > openbsd installer does not see my disk (neither does the netbsd installer). > > Thanks for all the help. > Randy > > On 12/21/06, Tom Cosgrove <[EMAIL PROTECTED]> wrote: > > > > You could try enabling ACPI (because you might have a problem with > > interrupt routing, and ACPI provides a different source of interrupt > > routing information to the kernel). > > > > Thanks > > > > Tom > > > > >>> Randy Sato 21-Dec-06 19:01 >>> > > > > > > I just installed 4.0 release then compiled and installed 4-current > > including > > > X on a brand new HP xw6400. > > > > > > I started X using the vesa driver, and it works (unlike the nv > > driver), but > > > the mouse does not seem to work. The keyboard may also not be working. > > > > > > I see the following: > > > > > > pckbc: command timeout > > > pmsi_enable: command error > > > pckbc: command timeout > > > pmsi_disable: command error > > > pckbc: command timeout > > > pmsi_enable: command error > > > > > > which I am assuming is the problem. > > > > > > Can someone suggest something I might do to identify and fix the > > problem. > > > > > > Below is my dmesg and uname output. > > > > > > Thanks, > > > Randy > > > > > > uname -a > > > OpenBSD pauhana.nsc.com 4.0 GENERIC.MP#0 amd64 > > > OpenBSD 4.0-current (GENERIC.MP) #0: Thu Dec 21 01:48:57 PST 2006 > > > > > > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > > real mem = 3220688896 (3145204K) > > > avail mem = 2757783552 (2693148K) > > > using 22937 buffers containing 322277376 bytes (314724K) of memory > > > mainbus0 (root) > > > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xeca30 (74 entries) > > > bios0: Hewlett-Packard HP xw6400 Workstation > > > acpi at mainbus0 not configured > > > mainbus0: Intel MP Specification (Version 1.4) > > > cpu0 at mainbus0: apid 0 (boot processor) > > > cpu0: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz, 2992.93 MHz > > > cpu0: > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG > > > cpu0: 4MB 64b/line 16-way L2 cache > > > cpu0: apic clock running at 332MHz > > > cpu1 at mainbus0: apid 1 (application processor) > > > cpu1: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz, 2992.50 MHz > > > cpu1: > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG > > > > > cpu1: 4MB 64b/line 16-way L2 cache > > > mpbios: bus 0 is type PCI > > > mpbios: bus 16 is type PCI > > > mpbios: bus 96 is type PCI > > > mpbios: bus 64 is type PCI > > > mpbios: bus 128 is type PCI > > > mpbios: bus 30 is type PCI > > > mpbios: bus 32 is type PCI > > > mpbios: bus 31 is type PCI > > > mpbios: bus 1 is type PCI > > > mpbios: bus 255 is type ISA > > > ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 20, 24 pins > > > pci0 at mainbus0 bus 0: configuration mode 1 > > > pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12 > > > ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12 > > > pci1 at ppb0 bus 16 > > > ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01 > > > pci2 at ppb1 bus 30 > > > ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01 > > > pci3 at ppb2 bus 32 > > > ppb3 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01 > > > pci4 at ppb3 bus 31 > > > bge0 at pci4 dev 0 function 0 "Broadcom BCM5752" rev 0x01, BCM5752 A1 > > > (0x6001): apic 1 int 17 (irq 5), address 00:18:71:6b:ee:7c > > > brgphy0 at bge0 phy 1: BCM5752 10/100/1000baseT PHY, rev. 0 > > > ppb4 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01 > > > pci5 at ppb4 bus 17 > > > ppb5 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12 > > > pci6 at ppb5 bus 96 > > > ppb6 at pci0 dev 4 function 0 vendor "Intel", unknown product 0x25fa > > rev > > > 0x12 > > > pci7 at ppb6 bus 64 > > > vga1 at pci7 dev 0 function 0 vendor "NVIDIA", unknown product 0x039e > > rev > > > 0xa1 > > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > > ppb7 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12 > > > pci8 at ppb7 bus 254 > > > ppb8 at pci0 dev 6 function 0 vendor "Intel", unknown product 0x25e6 > > rev > > > 0x12 > > > pci9 at ppb8 bus 253 > > > ppb9 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12 > > > pci10 at ppb9 bus 252 > > > pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12 > > > pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12 > > > pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12 > > > pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12 > > > pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12 > > > pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12 > > > pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12 > > > azalia0 at pci0 dev 27 function 0 "Intel 6321ESB HD Audio" rev 0x09: > > apic 1 > > > int 21 (irq 3) > > > azalia0: host: High Definition Audio rev. 1.0 > > > azalia0: codec: 0x04x/0x10ec (rev. 1.0), HDA version 1.0 > > > audio0 at azalia0 > > > ppb10 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09 > > > pci11 at ppb10 bus 128 > > > uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 1 > > int 16 > > > (irq 3) > > > usb0 at uhci0: USB revision 1.0 > > > uhub0 at usb0 > > > uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 > > > uhub0: 2 ports with 2 removable, self powered > > > uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 1 > > int 19 > > > (irq 5) > > > usb1 at uhci1: USB revision 1.0 > > > uhub1 at usb1 > > > uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 > > > uhub1: 2 ports with 2 removable, self powered > > > uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 1 > > int 18 > > > (irq 10) > > > usb2 at uhci2: USB revision 1.0 > > > uhub2 at usb2 > > > uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 > > > uhub2: 2 ports with 2 removable, self powered > > > uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: apic 1 > > int 23 > > > (irq 11) > > > usb3 at uhci3: USB revision 1.0 > > > uhub3 at usb3 > > > uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1 > > > uhub3: 2 ports with 2 removable, self powered > > > ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 1 > > int 16 > > > (irq 3) > > > usb4 at ehci0: USB revision 2.0 > > > uhub4 at usb4 > > > uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1 > > > uhub4: 8 ports with 8 removable, self powered > > > ppb11 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9 > > > pci12 at ppb11 bus 1 > > > pcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09 > > > pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, > > channel > > > 0 configured to compatibility, channel 1 configured to compatibility > > > atapiscsi0 at pciide0 channel 0 drive 0 > > > scsibus0 at atapiscsi0: 2 targets > > > cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8164B, 0B10> SCSI0 > > > 5/cdrom removable > > > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > > > pciide0: channel 1 disabled (no drives) > > > pciide1 at pci0 dev 31 function 2 "Intel 6321ESB SATA" rev 0x09: DMA, > > > channel 0 configured to native-PCI, channel 1 configured to native-PCI > > > pciide1: using apic 1 int 19 (irq 5) for native-PCI interrupt > > > wd0 at pciide1 channel 0 drive 0: <ST3250624AS> > > > wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors > > > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 > > > isa0 at pcib0 > > > isadma0 at isa0 > > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > > pckbc0 at isa0 port 0x60/5 > > > pckbd0 at pckbc0 (kbd slot) > > > pckbc0: using irq 1 for kbd slot > > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > > pmsi0 at pckbc0 (aux slot) > > > pckbc0: using irq 12 for aux slot > > > wsmouse0 at pmsi0 mux 0 > > > pcppi0 at isa0 port 0x61 > > > midi0 at pcppi0: <PC speaker> > > > spkr0 at pcppi0 > > > lpt0 at isa0 port 0x378/4 irq 7 > > > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > > > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > > > dkcsum: wd0 matches BIOS drive 0x80 > > > root on wd0a > > > rootdev=0x0 rrootdev=0x300 rawdev=0x302 > > > pckbc: command timeout > > > pmsi_enable: command error > > > pckbc: command timeout > > > pmsi_disable: command error > > > pckbc: command timeout > > > pmsi_enable: command error > > > > > > -- > > > This line intentionally blank.
