hi,
On Sun, Dec 24, 2006 at 09:44:46PM +0000, Karl O. Pinc wrote:
> I was just messing about upgrading some boxes from 3.8
> and I shut a router down for a while and the bridge
> it was plugged into hung. No response to pings and
> no response to the keyboard. The only thing I noticed
> was that the 3 keyboard lights were all blinking off
> and on together at about a 1 second interval.
>
> Everything is running 3.8.
>
can you see anything on the bridge console?
did it happen before or after the upgrade?
you upgraded to what?
can you please try with 4.0 or -current?
> The OpenBSD router/firewall is plugged into an OpenBSD
> bridge via a crossover cable. The bridge interface is
> a dc device. The firewall was powered down for a while
> and there was probably some traffic destined through it
> over the bridge while it was down. The purpose of the
> bridge is to do traffic queueing, on both sides of the
> bridge, so the bridge is running pf and altq. The
> bridge is transparent.
>
> I power cycled the bridge and everything's back to normal.
> I don't see anything in the logs.
>
> It's all old, old hardware, fwiw.
>
> Dmesg output for the bridge appended.
>
> It's never been a problem before so I'm not particularly
> anxious about the problem, but if there's something to
> be learned I'm all ears.
>
> Thanks.
>
> Karl <[EMAIL PROTECTED]>
> Free Software: "You don't pay back, you pay forward."
> -- Robert A. Heinlein
>
> OpenBSD 3.8-stable (GENERIC) #1: Tue Dec 20 21:20:37 CST 2005
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: AMD-K6(tm) 3D processor ("AuthenticAMD" 586-class) 501 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
> real mem = 28934144 (28256K)
> avail mem = 18362368 (17932K)
> using 378 buffers containing 1548288 bytes (1512K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(04) BIOS, date 07/01/99, BIOS32 rev. 0 @
> 0xf06f0
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xda2
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0d10/144 (7 entries)
> pcibios0: PCI Interrupt Router at 000:01:0 ("SIS 85C503 System" rev
> 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0x8000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "SIS 530 PCI" rev 0x02
> pciide0 at pci0 dev 0 function 1 "SIS 5513 EIDE" rev 0xd0: 530: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> wd0 at pciide0 channel 0 drive 0: <Maxtor 71084 AP>
> wd0: 16-sector PIO, LBA, 1036MB, 2122780 sectors
> atapiscsi0 at pciide0 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <, ATAPI CDROM, 1.30> SCSI0 5/cdrom
> removable
> wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> pcib0 at pci0 dev 1 function 0 "SIS 85C503 System" rev 0xb3
> "SIS 5595 System" rev 0x00 at pci0 dev 1 function 1 not configured
> ppb0 at pci0 dev 2 function 0 "SIS 86C201 AGP" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "SIS 530 VGA" rev 0xa2: aperture at
> 0xe7800000, size 0x400000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> dc0 at pci0 dev 10 function 0 "Lite-On PNIC" rev 0x20: irq 12, address
> 00:a0:cc:66:7d:9c
> bmtphy0 at dc0 phy 1: BCM5201 10/100 PHY, rev. 2
> dc1 at pci0 dev 11 function 0 "Lite-On PNIC" rev 0x20: irq 10, address
> 00:a0:cc:66:7d:9d
> bmtphy1 at dc1 phy 1: BCM5201 10/100 PHY, rev. 2
> dc2 at pci0 dev 12 function 0 "Lite-On PNIC" rev 0x20: irq 11, address
> 00:a0:cc:66:7d:9b
> bmtphy2 at dc2 phy 1: BCM5201 10/100 PHY, rev. 2
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> lm0 at isa0 port 0x290/8: LM78
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask e365 netmask ff65 ttymask ffe7
> pctr: user-level cycle counter enabled
> mtrr: K6-family MTRR support (2 registers)
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> WARNING: / was not properly unmounted
> dc0: failed to force tx and rx to idle state
> dc0: failed to force tx and rx to idle state
> dc1: failed to force tx and rx to idle state
> dc2: failed to force tx and rx to idle state
