hello,
anybody is experiencing the following troubles w/ bsd.mp 4.0-current
(4.0 too)?
msk ethernet device does not work
wpi crashes the kernel when I try to up
ifconfig wpi0 up
...
ddb> stopped at trap+0x55: movl %aex, 0x14c(%esi)
however w/ bsd msk works while wpi give me a wpi0: fatal firmware error
(if I start it before an AP is switched on)
hereinafter the dmesg for bsd and bsd.mp
[dmesg up]
OpenBSD 4.0-current (GENERIC) #1331: Wed Jan 3 09:48:30 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz ("GenuineIntel" 686-class)
1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16
real mem = 1063415808 (1038492K)
avail mem = 961888256 (939344K)
using 4256 buffers containing 53293056 bytes (52044K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(95) BIOS, date 09/16/06, BIOS32 rev. 0 @
0xfd5f0, SMBIOS rev. 2.4 @ 0xdc010 (18 entries)
bios0: Sony Corporation VGN-C1S_H
pcibios0 at bios0: rev 2.1 @ 0xfd5f0/0xa10
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/288 (16 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0x10000! 0xdc000/0x4000! 0xe0000/0x1800!
acpi at mainbus0 not configured
cpu0 at mainbus0
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130a2a06000a2a
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1667 MHz (1372 mV): speeds: 1667, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03: aperture
at 0xd0100000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: irq 4
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: 0x04x/0x10ec (rev. 1.0), HDA version 1.0
azalia0: codec: 0x04x/0x14f1 (rev. 0.0), HDA version 1.0
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1]: No audio function groups
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci1 at ppb0 bus 1
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8036" rev 0x13, Yukon-2
FE (0x1): irq 7
msk0 at mskc0 port A, address 00:13:a9:60:1b:eb
eephy0 at msk0 phy 0: Marvell 88E3082 10/100 PHY, rev. 3
ukphy0 at msk0 phy 3: Generic IEEE 802.3u media interface, rev. 0: OUI
0x121012, model 0x0004
ukphy0: no media present
ukphy1 at msk0 phy 6: Generic IEEE 802.3u media interface, rev. 0: OUI
0x004c00, model 0x0013
ukphy1: no media present
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 3
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: irq
11, address 00:18:de:ad:3e:96
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: irq 7
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: irq 5
ehci0: timed out waiting for BIOS
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
cbb0 at pci5 dev 3 function 0 "TI PCIXX12 CardBus" rev 0x00pci_intr_map:
no mapping for pin A
: couldn't map interrupt
vendor "TI", unknown product 0x803a (class serial bus subclass Firewire,
rev 0x00) at pci5 dev 3 function 1 not configured
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci5 dev 3 function 2
not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVR-K16M, 1.10> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <HTS541010G9SA00>
wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: irq 10
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask efed netmask efed ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uplcom0 at uhub0 port 1
uplcom0: Prolific Technology Inc. USB-Serial Controller D, rev
1.10/4.00, addr 2
ucom0 at uplcom0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
[dmesg mp]
OpenBSD 4.0-current (GENERIC.MP) #1130: Wed Jan 3 10:04:12 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz ("GenuineIntel" 686-class)
1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16
real mem = 1063415808 (1038492K)
avail mem = 961826816 (939284K)
using 4256 buffers containing 53293056 bytes (52044K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(95) BIOS, date 09/16/06, BIOS32 rev. 0 @
0xfd5f0, SMBIOS rev. 2.4 @ 0xdc010 (18 entries)
bios0: Sony Corporation VGN-C1S_H
pcibios0 at bios0: rev 2.1 @ 0xfd5f0/0xa10
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/288 (16 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0x10000! 0xdc000/0x4000! 0xe0000/0x1800!
acpi at mainbus0 not configured
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz ("GenuineIntel" 686-class)
1.67 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16
mainbus0: bus 0 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 10 is type PCI
mainbus0: bus 11 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03: aperture
at 0xd0100000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
apic 2 int 4 (irq 4)
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: 0x04x/0x10ec (rev. 1.0), HDA version 1.0
azalia0: codec: 0x04x/0x14f1 (rev. 0.0), HDA version 1.0
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1]: No audio function groups
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci1 at ppb0 bus 1
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8036" rev 0x13, Yukon-2
FE (0x1): apic 2 int 17 (irq 7)
msk0 at mskc0 port A, address 00:13:a9:60:1b:eb
eephy0 at msk0 phy 0: Marvell 88E3082 10/100 PHY, rev. 3
ukphy0 at msk0 phy 3: Generic IEEE 802.3u media interface, rev. 0: OUI
0x121012, model 0x0004
ukphy0: no media present
ukphy1 at msk0 phy 6: Generic IEEE 802.3u media interface, rev. 0: OUI
0x004c00, model 0x0013
ukphy1: no media present
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 3
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
apic 2 int 17 (irq 11), address 00:18:de:ad:3e:96
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int
23 (irq 5)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int
18 (irq 3)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int
19 (irq 11)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int
16 (irq 7)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int
23 (irq 5)
ehci0: timed out waiting for BIOS
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
cbb0 at pci5 dev 3 function 0 "TI PCIXX12 CardBus" rev 0x00pci_intr_map:
no mapping for pin A
: couldn't map interrupt
vendor "TI", unknown product 0x803a (class serial bus subclass Firewire,
rev 0x00) at pci5 dev 3 function 1 not configured
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci5 dev 3 function 2
not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVR-K16M, 1.10> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 (irq 10) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <HTS541010G9SA00>
wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2
int 19 (irq 10)
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
umass0 at uhub4 port 1 configuration 1 interface 0
umass0: Eutron PicoDisk 4, rev 2.00/30.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Eutron, PicoDisk 4, 3000> SCSI0 0/direct
removable
sd0: 495MB, 495 cyl, 64 head, 32 sec, 512 bytes/sec, 1014784 sec total
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: sd0 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
