I just recently acquired an old Micron TransPort NX i386 (PII) laptop and I'm having a very strange problem trying to use a wifi card. The card is a WPC11v3 16-bit PCMCIA card, which is supported by wi (I am certain, because it detects on floppy40.fs's kernel). Strangely enough, however, neither wi0, nor pcic0, to which wi0 was attached on floppy40.fs, are appearing on GENERIC or any of the other boot medium kernels (bsd.rd and floppy*40.fs). Cardbus doesn't appear to be backwards-compat with the 16-bit card, and detects it as "at pcmcia0 function 0 not configured" or sometimes as "pccom4 at pcmcia0 function 0: can't allocate i/o space" if anything at all; it doesn't even pick up the device name.
I am also running a 32-bit wired ethernet card (actually, some kind of ethernet/modem combo) in the other cardbus slot, though I'd like to have BOTH wired and wireless useable with the same kernel. I've tried disabling cardbus, but it doesn't have any effect on the 16-bit device. I've included multiple dmesgs below (sorry about the message size). I have maestro disabled on my otherwise stock GENERIC because it was working poorly; I can re-enable it and resend the dmesg, but nothing is different other than the maestro lines themselves. It's REALLY FRUSTRATING having my wifi card JUST out of reach. Any help or suggestions anyone can provide me would be very much appreciated. -- Aaron Suen mailto:[EMAIL PROTECTED] Big mess o' dmesgs follow... ======================================= dmesg.bsd.rd OpenBSD 4.0 (RAMDISK_CD) #39: Sat Sep 16 19:34:26 MDT 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD cpu0: Intel Celeron ("GenuineIntel" 686-class, 256KB L2 cache) 401 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR real mem = 133722112 (130588K) avail mem = 116072448 (113352K) using 1657 buffers containing 6787072 bytes (6628K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(05) BIOS, date 02/22/00, BIOS32 rev. 0 @ 0xfb0b0, SMBIOS rev. 2.1 @ 0xf0800 (31 entries) apm0 at bios0: Power Management spec V1.2 apm0: flags 70102 dobusy 1 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb52c pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdef0/128 (6 entries) pcibios0: PCI Exclusive IRQs: 5 9 10 pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB ISA" rev 0x00) pcibios0: PCI bus #3 is the last bus bios0: ROM list: 0xc0000/0x10000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Mach64 LB" rev 0xdc wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02 pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <IBM-DCYA-214000> wd0: 16-sector PIO, LBA, 13481MB, 27609120 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 1.5A> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 9 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered "Intel 82371AB Power" rev 0x02 at pci0 dev 7 function 3 not configured cbb0 at pci0 dev 9 function 0 "O2 Micro OZ6836/OZ6860 CardBus" rev 0x62: irq 10 cbb1 at pci0 dev 9 function 1 "O2 Micro OZ6836/OZ6860 CardBus" rev 0x62: irq 10 "ESS Maestro II" rev 0x00 at pci0 dev 10 function 0 not configured isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x20 pcmcia1 at cardslot1 biomask ffe5 netmask ffe5 ttymask ffe7 rd0: fixed, 3800 blocks pccom3 at pcmcia0 function 0: can't allocate i/o space dc0 at cardbus1 dev 0 function 0 "Xircom, CardBus Ethernet 10/100 + Modem 56, CBEM56G" irq 10 address 00:10:a4:fb:e3:67 tqphy0 at dc0 phy 0: 78Q2120 10/100 PHY, rev. 10 Xircom, CardBus Ethernet 10/100 + Modem 56, CBEM56G, 1.03 (manufacturer 0x105, product 0x1000) "Xircom 56k Modem" rev 0x03 at cardbus1 dev 0 function 1 not configured dkcsum: wd0 matches BIOS drive 0x80 root on rd0a rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02 ======================================= dmesg.floppy40.fs OpenBSD 4.0 (RAMDISK) #35: Sat Sep 16 19:38:32 MDT 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK cpu0: Intel Celeron ("GenuineIntel" 686-class, 256KB L2 cache) 401 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR real mem = 133722112 (130588K) avail mem = 117944320 (115180K) using 1657 buffers containing 6787072 bytes (6628K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(05) BIOS, date 02/22/00, BIOS32 rev. 0 @ 0xfb0b0, SMBIOS rev. 2.1 @ 0xf0800 (31 entries) apm0 at bios0: Power Management spec V1.2 apm0: flags 70102 dobusy 1 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb52c pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdef0/128 (6 entries) pcibios0: PCI Exclusive IRQs: 5 9 10 pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB ISA" rev 0x00) pcibios0: PCI bus #3 is the last bus bios0: ROM list: 0xc0000/0x10000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Mach64 LB" rev 0xdc wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02 pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <IBM-DCYA-214000> wd0: 16-sector PIO, LBA, 13481MB, 27609120 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 1.5A> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 "Intel 82371AB USB" rev 0x01 at pci0 dev 7 function 2 not configured "Intel 82371AB Power" rev 0x02 at pci0 dev 7 function 3 not configured "O2 Micro OZ6836/OZ6860 CardBus" rev 0x62 at pci0 dev 9 function 0 not configured "O2 Micro OZ6836/OZ6860 CardBus" rev 0x62 at pci0 dev 9 function 1 not configured "ESS Maestro II" rev 0x00 at pci0 dev 10 function 0 not configured isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384 pcic0 controller 0: <Intel 82365SL rev 0> has sockets A and B pcmcia0 a pcic0 controller 0 socket 0 wi0 at pcmcia0 function 0 "The Linksys Group, Inc., Instant Wireless Network PC Card, ISL37300P" port 0x400/64, irq 11 wi0: PRISM3 ISL37300P (0x801b), Firmware 1.0.5 (primary), 1.3.4 (station), address 00:06:25:aa:16:64 pcmcia1 at pcic0 controller 0 socket 1 at pcmcia1 function 0 not configured pcic0: irq 7, polling enabled biomask f765 netmask ff65 ttymask ffe7 rd0: fixed, 3800 blocks dkcsum: wd0 matches BIOS drive 0x80 root on rd0a rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02 ======================================= dmesg.floppyB40.fs OpenBSD 4.0 (RAMDISKB) #34: Sat Sep 16 19:42:22 MDT 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISKB cpu0: Intel Celeron ("GenuineIntel" 686-class, 256KB L2 cache) 401z cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR real mem = 133722112 (130588K) avail mem = 117923840 (115160K) using 1657 buffers containing 6787072 bytes (6628K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(05) BIOS, date 02/22/00, BIOS32 rev. 0 @ 0xfb0b0, SMBIOS rev. 2.1 @ 0xf0800 (31 entries) apm0 at bios0: Power Management spec V1.2 apm0: flags 70102 dobusy 1 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb52c pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdef0/128 (6 entries) pcibios0: PCI Exclusive IRQs: 5 9 10 pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB ISA" rev 0x00) pcibios0: PCI bus #3 is the last bus bios0: ROM list: 0xc0000/0x10000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Mach64 LB" rev 0xdc wsdisplay0 at vga1 mux 1: console (80x25, vt emulation) pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02 pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <IBM-DCYA-214000> wd0: 16-sector PIO, LBA, 13481MB, 27609120 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 1.5A> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 "Intel 82371AB USB" rev 0x01 at pci0 dev 7 function 2 not configured "Intel 82371AB Power" rev 0x02 at pci0 dev 7 function 3 not configured "O2 Micro OZ6836/OZ6860 CardBus" rev 0x62 at pci0 dev 9 funn 0 not configured "O2 Micro OZ6836/OZ6860 CardBus" rev 0x62 at pci0 dev 9 function 1 not configured "ESS Maestro II" rev 0x00 at pci0 dev 10 function 0 not configured isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask ffe5 netmask ffe5 ttymask ffe7 rd0: fixed, 3800 blocks dkcsum: wd0 matches BIOS drive 0x80 root on rd0a rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02 ======================================= dmesg.floppyC40.fs OpenBSD 4.0 (RAMDISKC) #34: Sat Sep 16 19:46:28 MDT 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISKC cpu0: Intel Celeron ("GenuineIntel" 686-class, 256KB L2 cache) 401 MHz cpu0: FPU,V86,DSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR real mem = 133722112 (130588K) avail mem = 117919744 (115156K) using 1657 buffers containing 6787072 bytes (6628K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(05) BIOS, date 02/22/00, BIOS32 rev. 0 @ 0xfb0b0, SMBIOS rev. 2.1 @ 0xf0800 (31 entries) apm0 at bios0: Power Management spec V1.2 apm0: flags 70102 dobusy 1 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb52c pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdef0/128 (6 entries) pcibios0: PCI Exclusive IRQs: 5 9 10 pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB ISA" rev 0x00) pcibios0: PCI bus #3 is the last bus bios0: ROM list: 0xc0000/0x10000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Mach64 LB" rev 0xdc wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) pcib0pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02 pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <IBM-DCYA-214000> wd0: 16-sector PIO, LBA, 13481MB, 27609120 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 1.5A> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 9 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered "Intel 82371AB Power" rev 0x02 at pci0 dev 7 function 3 not configured cbb0 at pci0 dev 9 function 0 "O2 Micro OZ6836/OZ6860 CardBus" rev 0x62: irq 10 cbb1 at pci0 dev 9 function 1 "O2 Micro OZ6836/OZ6860 CardBus" rev 0x62: irq 10 "ESS Maestro II" rev 0x00 at pci0 dev 10 function 0 not configured isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x20 pcmcia1 at cardslot1 biomask ffe5 netmask ffe5 ttymask ffe7 rd0: fixed, 3800 blocks at pcmcia0 function 0 not configured dc0 at cardbus1 dev 0 function 0 "Xircom, CardBus Ethernet 10/100 + Modem 56, CBEM56G" irq 10 address 00:10:a4:fb:e3:67 tqphy0 at dc0 phy 0: 78Q2120 10/100 PHY, rev. 10 Xircom, CardBus Ethernet 10/100 + Modem 56, CBEM56G, 1.03 (manufacturer 0x105, product 0x1000) "Xircom 56k Modem" rev 0x03 at cardbus1 dev 0 function 1 not configured dkcsum: wd0 matches BIOS drive 0x80 root on rd0a rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02 ======================================= dmesg.generic-maestro-disabled OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Celeron ("GenuineIntel" 686-class, 256KB L2 cache) 401 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR real mem = 133722112 (130588K) avail mem = 114589696 (111904K) using 1657 buffers containing 6787072 bytes (6628K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(05) BIOS, date 02/22/00, BIOS32 rev. 0 @ 0xfb0b0, SMBIOS rev. 2.1 @ 0xf0800 (31 entries) apm0 at bios0: Power Management spec V1.2 apm0: AC on, no battery apm0: flags 70102 dobusy 1 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb52c pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdef0/128 (6 entries) pcibios0: PCI Exclusive IRQs: 5 9 10 pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB ISA" rev 0x00) pcibios0: PCI bus #3 is the last bus bios0: ROM list: 0xc0000/0x10000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Mach64 LB" rev 0xdc wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02 pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <IBM-DCYA-214000> wd0: 16-sector PIO, LBA, 13481MB, 27609120 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 1.5A> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 9 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: SMI iic0 at piixpm0 admtemp0 at iic0 addr 0x4e: adm1021 cbb0 at pci0 dev 9 function 0 "O2 Micro OZ6836/OZ6860 CardBus" rev 0x62: irq 10 cbb1 at pci0 dev 9 function 1 "O2 Micro OZ6836/OZ6860 CardBus" rev 0x62: irq 10 "ESS Maestro II" rev 0x00 at pci0 dev 10 function 0 not configured isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x20 pcmcia1 at cardslot1 biomask ef65 netmask ef65 ttymask ffe7 pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support dc0 at cardbus1 dev 0 function 0 "Xircom, CardBus Ethernet 10/100 + Modem 56, CBEM56G" irq 10 address 00:10:a4:fb:e3:67 tqphy0 at dc0 phy 0: 78Q2120 10/100 PHY, rev. 10 pccom3 at cardbus1 dev 0 function 1 "Xircom, CardBus Ethernet 10/100 + Modem 56, CBEM56G": Xircom CardBus Ethernet 10/100 + Modem 56 pccom3: irq 10: ti16750, 64 byte fifo dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 WARNING: / was not properly unmounted pccom4 at pcmcia0 function 0: can't allocate i/o space
