Constantine A. Murenin wrote:
Hi,
Anyone tried subj?
http://www.newegg.com/Product/Product.asp?Item=N82E16856167012
http://www.msicomputer.com/product/p_spec.asp?model=Axis_700_Lite
It looks pretty-pretty nice, and goes for a very reasonable price --
about 202,32 USD delivered for a complete barebone -- it includes
case, PSU, mini-ITX motherboard and a fanless VIA C7 1GHz CPU. It even
has two serial ports and accepts one full-size PCI card!
If anyone has any experience with this system, a dmesg and `sysctl
hw.sensors` along with some acoustical descriptions would be really
neat. (I suspect that this candy may have a non-controllable fan in
the PSU, which would mean that it may not be 100% quiet in a living
room / bedroom setting.)
Cheers,
Constantine.
With the hard drive, cdrom, and nic (re0) in the pci slot it draws 25watts,
21watts without.
The PSU Fan is typical noise wise.
It did not want to boot from a USB thumb drive.
sysctl hw.sensors
hw.sensors.0=lm0, VCore A, 2.00 V DC
hw.sensors.1=lm0, VCore B, 3.79 V DC
hw.sensors.2=lm0, +3.3V, 3.26 V DC
hw.sensors.3=lm0, +5V, 5.48 V DC
hw.sensors.4=lm0, +12V, 12.29 V DC
hw.sensors.5=lm0, -12V, -12.86 V DC
hw.sensors.6=lm0, -5V, -4.88 V DC
hw.sensors.7=lm0, Temp1, 36.00 degC
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Esther processor 1000MHz ("CentaurHauls" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,SSE3,EST,TM2
cpu0: unknown Enhanced SpeedStep CPU, msr 0x08100a1308000a13
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1000 MHz (1004 mV): speeds: 1000, 800 MHz
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
real mem = 468217856 (457244K)
avail mem = 419028992 (409208K)
using 4256 buffers containing 23515136 bytes (22964K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(db) BIOS, date 10/31/06, BIOS32 rev. 0 @
0xf92c0, SMBIOS rev. 2.3 @ 0xf0800 (33 entries)
bios0: MICRO-STAR INTERNATIONAL CO., LTD MS-7199
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xbdd4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfbd50/128 (6 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 6 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xfe00
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01:
aperture at 0xf4000000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide1 channel 0 drive 0: <Maxtor 92049U3>
wd0: 16-sector PIO, LBA, 19536MB, 40010544 sectors
atapiscsi0 at pciide1 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8521B, 1.00> SCSI0
5/cdrom removable
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 4
cd0(pciide1:0:1): using PIO mode 4, DMA mode 2
pciide1: channel 1 ignored (disabled)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
"unknown" at iic0 addr 0x18 not configured
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 5
ac97: codec id 0x56494182 (VIA Technologies <82>)
ac97: codec features 18 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: irq 10, address
00:19:db:33:35:58
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
0x004063, model 0x0032
re0 at pci0 dev 20 function 0 "Realtek 8169" rev 0x10: irq 11, address
b2:43:a4:05:a4:05
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: unknown Winbond chip (ID 0xa1)
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask ffe5 netmask ffe5 ttymask ffe7
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
