Can you try the attached diff? It has some debug printf's in there,
so please send me a dmesg.
Regarding the high interrupt load on the v210; try disconnecting the
CD-ROM/DVD-ROM.
Index: mii/eephy.c
===================================================================
RCS file: /cvs/src/sys/dev/mii/eephy.c,v
retrieving revision 1.39
diff -u -p -r1.39 eephy.c
--- mii/eephy.c 5 Jan 2007 21:40:45 -0000 1.39
+++ mii/eephy.c 3 Feb 2007 14:10:36 -0000
@@ -133,7 +133,7 @@ eephyattach(struct device *parent, struc
struct mii_attach_args *ma = aux;
struct mii_data *mii = ma->mii_data;
const struct mii_phydesc *mpd;
- int reg;
+ int reg, page;
mpd = mii_phy_match(ma, eephys);
printf(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2));
@@ -147,6 +147,33 @@ eephyattach(struct device *parent, struc
/* XXX No loopback support yet, although the hardware can do it. */
sc->mii_flags |= MIIF_NOLOOP;
+
+ {
+ int i;
+ for (i = 0; i < 32; i++)
+ printf("%d: 0x%04x\n", i, PHY_READ(sc, i));
+ }
+
+ /* Switch to fiber-only mode if necessary. */
+ if (sc->mii_model == MII_MODEL_MARVELL_E1112 &&
+ sc->mii_flags & MIIF_HAVEFIBER) {
+ page = PHY_READ(sc, E1000_EADR);
+ PHY_WRITE(sc, E1000_EADR, 2);
+ reg = PHY_READ(sc, E1000_SCR);
+ printf("16_2: 0x%04x\n", reg);
+ reg &= ~E1000_SCR_MODE_MASK;
+ reg |= E1000_SCR_MODE_1000BX;
+ PHY_WRITE(sc, E1000_SCR, reg);
+ PHY_WRITE(sc, E1000_EADR, page);
+
+ PHY_RESET(sc);
+ }
+
+ {
+ int i;
+ for (i = 0; i < 32; i++)
+ printf("%d: 0x%04x\n", i, PHY_READ(sc, i));
+ }
sc->mii_capabilities = PHY_READ(sc, E1000_SR) & ma->mii_capmask;
if (sc->mii_capabilities & BMSR_EXTSTAT)
Index: pci/if_msk.c
===================================================================
RCS file: /cvs/src/sys/dev/pci/if_msk.c,v
retrieving revision 1.43
diff -u -p -r1.43 if_msk.c
--- pci/if_msk.c 3 Feb 2007 12:50:26 -0000 1.43
+++ pci/if_msk.c 3 Feb 2007 14:10:37 -0000
@@ -1071,6 +1071,14 @@ msk_attach(struct device *parent, struct
ifp->if_capabilities = IFCAP_VLAN_MTU;
+ /* GMAC and GPHY Reset */
+ SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_RESET_SET);
+ SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, SK_GPHY_RESET_SET);
+ DELAY(1000);
+ SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, SK_GPHY_RESET_CLEAR);
+ SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_LOOP_OFF |
+ SK_GMAC_PAUSE_ON | SK_GMAC_RESET_CLEAR);
+
/*
* Do miibus setup.
*/
@@ -1086,7 +1094,7 @@ msk_attach(struct device *parent, struct
ifmedia_init(&sc_if->sk_mii.mii_media, 0,
msk_ifmedia_upd, msk_ifmedia_sts);
mii_attach(self, &sc_if->sk_mii, 0xffffffff, MII_PHY_ANY,
- MII_OFFSET_ANY, MIIF_DOPAUSE|MIIF_FORCEANEG);
+ MII_OFFSET_ANY, MIIF_DOPAUSE|MIIF_HAVEFIBER);
if (LIST_FIRST(&sc_if->sk_mii.mii_phys) == NULL) {
printf("%s: no PHY found!\n", sc_if->sk_dev.dv_xname);
ifmedia_add(&sc_if->sk_mii.mii_media, IFM_ETHER|IFM_MANUAL,
@@ -1275,6 +1283,8 @@ mskc_attach(struct device *parent, struc
sc->sk_ramsize, sc->sk_ramsize / 1024,
sc->sk_rboff));
+ printf("pmdtype: %c\n", sk_win_read_1(sc, SK_PMDTYPE));
+
switch (sc->sk_type) {
case SK_YUKON_XL:
sc->sk_name = "Yukon-2 XL";
@@ -1838,6 +1848,7 @@ msk_init_yukon(struct sk_if_softc *sc_if
DPRINTFN(6, ("msk_init_yukon: 1\n"));
+#if 0
/* GMAC and GPHY Reset */
SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_RESET_SET);
SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, SK_GPHY_RESET_SET);
@@ -1848,6 +1859,7 @@ msk_init_yukon(struct sk_if_softc *sc_if
SK_IF_WRITE_4(sc_if, 0, SK_GPHY_CTRL, SK_GPHY_RESET_CLEAR);
SK_IF_WRITE_4(sc_if, 0, SK_GMAC_CTRL, SK_GMAC_LOOP_OFF |
SK_GMAC_PAUSE_ON | SK_GMAC_RESET_CLEAR);
+#endif
DPRINTFN(3, ("msk_init_yukon: gmac_ctrl=%#x\n",
SK_IF_READ_4(sc_if, 0, SK_GMAC_CTRL)));
