Hi,
I got to add 2 more hard drives to a server I manage (dmesg below)
sd4 showed up no problem, but /dev/sd5 doesn't exist.
[EMAIL PROTECTED]:/home/jross $ sudo fdisk -i sd5
Password:
fdisk: sd5: No such file or directory
Any gotchas on adding the other sd device? Should this be something
that is added to MAKEDEV?
Thanks,
Jeff
OpenBSD 4.0-current (GENERIC.MP) #9: Thu Feb 8 01:47:47 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
real mem = 2146988032 (2096668K)
avail mem = 1950171136 (1904464K)
using 4256 buffers containing 107474944 bytes (104956K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 03/30/01, BIOS32 rev. 0 @ 0xfd85e,
SMBIOS rev. 2.3 @ 0xef530 (51 entries)
bios0: Intel STL2
apm at bios0 function 0x15 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd7c0/0x840
pcibios0: PCI BIOS has 11 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks OSB4" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800 0xc9800/0x5400
acpi at mainbus0 not configured
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 3 (boot processor)
cpu0: apic clock running at 133 MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III ("GenuineIntel" 686-class) 1 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type ISA
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0: apid 5 pa 0xfec01000, version 11, 16 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06
pci1 at pchb1 bus 1
ahc0 at pci1 dev 4 function 0 "Adaptec AIC-7899 U160" rev 0x01: apic 5
int 0 (irq 9)
scsibus0 at ahc0: 16 targets
ahc1 at pci1 dev 4 function 1 "Adaptec AIC-7899 U160" rev 0x01: apic 5
int 1 (irq 5)
scsibus1 at ahc1: 16 targets
st0 at scsibus1 targ 3 lun 0: <HP, C1537A, L708> SCSI2 1/sequential
removable
vga1 at pci0 dev 2 function 0 "ATI Mach64 GV" rev 0x7a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0 dev 3 function 0 "Intel 8255x" rev 0x08, i82559: apic 5 int
2 (irq 10), address 00:d0:b7:b8:0a:d1
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ahc2 at pci0 dev 7 function 0 "Adaptec AHA-29160 U160" rev 0x02: apic 5
int 7 (irq 9)
scsibus2 at ahc2: 16 targets
sd0 at scsibus2 targ 0 lun 0: <SEAGATE, ST318405LW, 0105> SCSI3 0/direct
fixed
sd0: 17501MB, 19036 cyl, 4 head, 470 sec, 512 bytes/sec, 35843670 sec total
sd1 at scsibus2 targ 1 lun 0: <SEAGATE, ST318405LC, 0105> SCSI3 0/direct
fixed
sd1: 17501MB, 19036 cyl, 4 head, 470 sec, 512 bytes/sec, 35843670 sec total
sd2 at scsibus2 targ 2 lun 0: <SEAGATE, ST318405LC, 0105> SCSI3 0/direct
fixed
sd2: 17501MB, 19036 cyl, 4 head, 470 sec, 512 bytes/sec, 35843670 sec total
sd3 at scsibus2 targ 3 lun 0: <SEAGATE, ST318405LC, 0105> SCSI3 0/direct
fixed
sd3: 17501MB, 19036 cyl, 4 head, 470 sec, 512 bytes/sec, 35843670 sec total
sd4 at scsibus2 targ 4 lun 0: <SEAGATE, ST318405LC, 0105> SCSI3 0/direct
fixed
sd4: 17501MB, 19036 cyl, 4 head, 470 sec, 512 bytes/sec, 35843670 sec total
sd5 at scsibus2 targ 5 lun 0: <SEAGATE, ST318405LC, 0105> SCSI3 0/direct
fixed
sd5: 17501MB, 19036 cyl, 4 head, 470 sec, 512 bytes/sec, 35843670 sec total
puc0 at pci0 dev 9 function 0 "US Robotics 3CP5610" rev 0x01: com
pccom3 at puc0 port 0 apic 5 int 9 (irq 11): ns16550a, 16 byte fifo
piixpm0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x50: polling
iic0 at piixpm0
pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus3 at atapiscsi0: 2 targets
cd0 at scsibus3 targ 0 lun 0: <MITSUMI, CD-ROM FX4830T!B, R02E> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: couldn't map native-PCI interrupt
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ahc2: target 0 using 16bit transfers
ahc2: target 0 synchronous at 80.0MHz DT, offset = 0x3f
dkcsum: sd0 matches BIOS drive 0x80
ahc2: target 1 using 16bit transfers
ahc2: target 1 synchronous at 80.0MHz DT, offset = 0x3f
dkcsum: sd1 matches BIOS drive 0x81
ahc2: target 2 using 16bit transfers
ahc2: target 2 synchronous at 80.0MHz DT, offset = 0x3f
dkcsum: sd2 matches BIOS drive 0x82
ahc2: target 3 using 16bit transfers
ahc2: target 3 synchronous at 80.0MHz DT, offset = 0x3f
dkcsum: sd3 matches BIOS drive 0x83
ahc2: target 4 using 16bit transfers
ahc2: target 4 synchronous at 80.0MHz DT, offset = 0x3f
dkcsum: sd4 matches BIOS drive 0x84
ahc2: target 5 using 16bit transfers
ahc2: target 5 synchronous at 80.0MHz DT, offset = 0x3f
dkcsum: sd5 matches BIOS drive 0x85
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
