On Fri, Mar 23, 2007 at 09:25:29PM +0100, viq wrote:
> I have a TP X31 on which I just compiled ACPI-enabled kernel, so I
> finally can get access to the thermal sensors. But, at the same time,
> the shortcuts to suspend (Fn+F4), hibernate (Fn+F12) or even turn off
> the screen (Fn+F3) stopped working. Is that a known behaviour? Is
> there a way to make those work again?
>
> Kernel config I used:
> =========<config>========================
> include "arch/i386/conf/GENERIC"
>
> option ACPIVERBOSE
> option ACPI_ENABLE
> acpi0 at mainbus?
> acpitimer* at acpi?
> acpihpet* at acpi?
> acpiac* at acpi?
> acpibat* at acpi?
> acpibtn* at acpi?
> acpicpu* at acpi?
> acpidock* at acpi?
> acpiec* at acpi?
> acpiprt* at acpi?
> acpitz* at acpi?
> ===========</config>====================
>
> Just in case, dmesg below:
>
> OpenBSD 4.1-current (ACPI) #1: Thu Mar 22 11:59:36 CET 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/ACPI
> cpu0: Intel(R) Pentium(R) M processor 1600MHz ("GenuineIntel"
> 686-class) 1.60 GHz
> cpu0:
>
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2
> real mem = 804155392 (785308K)
> avail mem = 725643264 (708636K)
> using 4278 buffers containing 40333312 bytes (39388K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+ BIOS, date 09/22/05, BIOS32 rev. 0 @
> 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (57 entries)
> bios0: IBM 2885PWU
> apm0 at bios0: Power Management spec V1.2
> apm0: battery life expectancy 100%
> apm0: AC on, battery charge high
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #6 is the last bus
> bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000
> 0xdc000/0x4000! 0xe0000/0x10000
> acpi0 at mainbus0: rev 2
> acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpi device at acpi0 from table DSDT not configured
> acpi device at acpi0 from table FACP not configured
> acpi device at acpi0 from table SSDT not configured
> acpi device at acpi0 from table ECDT not configured
> acpi device at acpi0 from table TCPA not configured
> acpi device at acpi0 from table BOOT not configured
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (AGP_)
> acpiprt2 at acpi0: bus 2 (PCI1)
> acpiprt3 at acpi0: bus 0 (DOCK)
> acpiec0 at acpi0: EC__
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0: model: IBM-08K8039 serial: 1202 type: LION
> oem: Panasonic
> acpibat1 at acpi0: BAT1: not present
> acpibat2 at acpi0: BAT2: not present
> acpiac0 at acpi0: AC unit online
> acpicpu0 at acpi0: CPU_: 1600, 1400, 1200, 1000, 800, 600 MHz
> acpitz0 at acpi0, critical temperature: 91 degC
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev 0x03
> ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev 0x03
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0
> uhub0: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub0: 6 ports with 6 removable, self powered
> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
> pci2 at ppb1 bus 2
> cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xaa: irq 11
> cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus" rev 0xaa: irq 5
> "Ricoh 5C552 Firewire" rev 0x02 at pci2 dev 0 function 2 not configured
> em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82540EP)" rev 0x03:
> irq 11, address 00:09:6b:bf:79:b0
> ipw0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2100" rev 0x04: irq
> 11, address 00:04:23:78:c1:da
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0
> pcmcia0 at cardslot0
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 6 device 0 cacheline 0x0, lattimer 0xb0
> pcmcia1 at cardslot1
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
> pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> wd0 at pciide0 channel 0 drive 0: <ST9120821A>
> wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4240N, 0213> SCSI0
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 5
> iic0 at ichiic0
> auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 5,
> ICH4 AC97
> ac97: codec id 0x41445374 (Analog Devices AD1981B)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auich0
> "Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3
> uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt2 at isa0 port 0x3bc/4: polled
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> biomask efe5 netmask efe5 ttymask ffe7
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> auich0: measured ac97 link rate at 47954 Hz, will use 48000 Hz
>
>
> --
> viq
>
