On 3/13/07, Damon McMahon <[EMAIL PROTECTED]> wrote:
For the archives, the Aptiva BIOS had incorrect IRQ/address values
for "Serial Port 1" and "Serial Port 2". A BIOS flash to the latest
available version (perhaps unnecessary) and then setting these to
match the values specified in pccom(4) resolved the issue.
Just for the record: the same works here.
OpenBSD 4.1-current (GENERIC) #1445: Thu Mar 22 11:06:59 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 150 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
cpu0: F00F bug workaround installed
real mem = 48852992 (47708K)
avail mem = 35954688 (35112K)
using 627 buffers containing 2568192 bytes (2508K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 11/23/96, BIOS32 rev. 0 @ 0xfd981
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI BIOS has 6 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:01:0 ("SiS 85C503 System" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "SiS 5511" rev 0x00
pcib0 at pci0 dev 1 function 0 "SiS 85C503 System" rev 0x01
pciide0 at pci0 dev 1 function 1 "SiS 5513 EIDE" rev 0x08: 5597/5598: DMA, chann
el 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL540A>
wd0: 8-sector PIO, LBA, 519MB, 1064448 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
rl0 at pci0 dev 7 function 0 "Realtek 8139" rev 0x10: irq 12, address 00:20:18:c
0:84:d1
rlphy0 at rl0 phy 0: RTL internal PHY
siop0 at pci0 dev 11 function 0 "Symbios Logic 53c815" rev 0x04: irq 11
scsibus0 at siop0: 8 targets
sd0 at scsibus0 targ 6 lun 0: <NEC, D3825, 5F14> SCSI2 0/direct fixed
sd0: 696MB, 1416 cyl, 16 head, 63 sec, 512 bytes/sec, 1427328 sec total
vga1 at pci0 dev 20 function 0 "SiS 86C205" rev 0xd3: aperture at 0x20000000, si
ze 0x400000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef6d netmask ff6d ttymask ffef
pctr: 586-class performance counters and user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
siop0: target 6 now using 8 bit 10.0 MHz 8 REQ/ACK offset xfers
dkcsum: sd0 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
