Hi
When I installed the current version of the source, my computer froze
when starting up after the message "mtrr: Pentium Pro MTRR support".
When I used the GENERIC config file that came with 4.0, everything
worked fine. Just wanted to let the developers know in case there is an
issue. My dmesg is included below.
Thanks
Jonathan Steel
OpenBSD 4.0 (GENERIC.MP) #936: Sat Sep 16 19:27:28 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz ("GenuineIntel" 686-class)
2.13 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16
real mem = 2145869824 (2095576K)
avail mem = 1949290496 (1903604K)
using 4256 buffers containing 107397120 bytes (104880K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(e6) BIOS, date 10/30/06, BIOS32 rev. 0 @
0xfd470, SMB IOS rev. 2.51 @ 0x7feea000 (33 entries)
bios0: Supermicro PDSMi
pcibios0 at bios0: rev 2.1 @ 0xfd470/0xb90
pcibios0: PCI BIOS has 20 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
pcibios0: PCI bus #15 is the last bus
bios0: ROM list: 0xc0000/0xb000 0xcb000/0x1000 0xcc000/0x1000
0xcd000/0x1000
ipmi at mainbus0 not configured
mainbus0: Intel MP Specification (Version 1.4) (INTEL MUKILTEO )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: unknown Core FSB_FREQ value 0 (0x42080000)
cpu0: apic clock running at 266 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz ("GenuineIntel" 686-class)
2.13 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16
mainbus0: bus 0 is type PCI
mainbus0: bus 9 is type PCI
mainbus0: bus 10 is type PCI
mainbus0: bus 13 is type PCI
mainbus0: bus 14 is type PCI
mainbus0: bus 15 is type PCI
mainbus0: bus 16 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 3 pa 0xfec10000, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0xc0
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 9
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 10
em0 at pci3 dev 1 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: apic
3 int 0 (irq 11), address 00:0e:0c:b6:80:9e
"Intel IOxAPIC" rev 0x09 at pci2 dev 0 function 1 not configured
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci4 at ppb3 bus 13
em1 at pci4 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: apic
2 int 16 (irq 11), address 00:30:48:8a:ca:f8
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 14
em2 at pci5 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: apic
2 int 17 (irq 11), address 00:30:48:8a:ca:f9
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int
23 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int
19 (irq 11)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int
18 (irq 5)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int
16 (irq 11)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int
23 (irq 10)
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci6 at ppb5 bus 15
vga1 at pci6 dev 0 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 c onfigured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E-N, 1.AA> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GR AHCI SATA" rev 0x01:
DMA, chann el 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 2 int 19 (irq 11) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD3200YS-01PGB0> wd0: 16-sector
PIO, LBA48, 305245MB, 625142448 sectors
wd1 at pciide1 channel 0 drive 1: <WDC WD5000YS-01MPB1> wd1: 16-sector
PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
wd2 at pciide1 channel 1 drive 0: <WDC WD5000YS-01MPB0> wd2: 16-sector
PIO, LBA48, 476940MB, 976773168 sectors
wd2(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2
int 19 (irq 11)
iic0 at ichiic0
lm1 at iic0 addr 0x2d: W83627HF
"unknown" at iic0 addr 0x2f not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker> spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
lm1 detached
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask 0 netmask 0 ttymask 0
ioapic0: pin 16 shares different IPL interrupts (40..50), degraded
performance
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x82
dkcsum: wd2 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
cpu1: unknown Core FSB_FREQ value 0 (0x42080000)
