[EMAIL PROTECTED] wrote: -----
>To: openbsd misc <[email protected]>
>From: carlopmart <[EMAIL PROTECTED]>
>Sent by: [EMAIL PROTECTED]
>Date: 02/04/2007 12:36PM
>Subject: Dell 1950 under OpenBSD
>
>Hi all,
>
> Somebody have test it this Dell server under OpenBSD 4.0? this
>server use SAS
>or SATA disk with PERC 5/i controller, are they supported under
>OpenBSD 4.0?
>
>Many thanks.
>
>--
>CL Martinez
>carlopmart {at} gmail {d0t} com
OpenBSD 4.0 (GENERIC.MP) #936: Sat Sep 16 19:27:28 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz ("GenuineIntel" 686-class) 1.60
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16
real mem = 1072955392 (1047808K)
avail mem = 970682368 (947932K)
using 4256 buffers containing 53751808 bytes (52492K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 10/18/06, BIOS32 rev. 0 @
0xffe90, SMBIOS rev. 2.4 @ 0x3ffbc000 (62 entries)
bios0: Dell Inc. PowerEdge 1950
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfada0/368 (21 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 6321ESB LPC" rev 0x00)
pcibios0: PCI bus #15 is the last bus
bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x4e00 0xec000/0x4000!
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (DELL PE 01B3 )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: unknown Core FSB_FREQ value 0 (0xc188149f)
cpu0: apic clock running at 266 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz ("GenuineIntel" 686-class) 1.60
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 7 is type PCI
mainbus0: bus 8 is type PCI
mainbus0: bus 9 is type PCI
mainbus0: bus 10 is type PCI
mainbus0: bus 11 is type PCI
mainbus0: bus 12 is type PCI
mainbus0: bus 13 is type PCI
mainbus0: bus 14 is type PCI
mainbus0: bus 15 is type PCI
mainbus0: bus 16 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
ioapic1 at mainbus0: apid 3 pa 0xfec81000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 3
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 5
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 6
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 7
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 8
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 2 int 16
(irq 5), address 00:15:c5:ef:2a:77
brgphy0 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci5 at ppb4 bus 9
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 10
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
pci7 at ppb6 bus 1
ppb7 at pci7 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci8 at ppb7 bus 2
mpi0 at pci8 dev 8 function 0 "Symbios Logic SAS1068" rev 0x01: apic 3 int
0 (irq 5)
scsibus0 at mpi0: 126 targets
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST336754SS, S411> SCSI3 0/direct
fixed
sd0: 34732MB, 50824 cyl, 2 head, 699 sec, 512 bytes/sec, 71132959 sec total
ses0 at scsibus0 targ 8 lun 0: <DP, BACKPLANE, 1.00> SCSI3 13/enclosure
services fixed
ppb8 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0x12
pci9 at ppb8 bus 11
ppb9 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci10 at ppb9 bus 12
ppb10 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x12
pci11 at ppb10 bus 13
ppb11 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci12 at ppb11 bus 14
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb12 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci13 at ppb12 bus 3
ppb13 at pci13 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci14 at ppb13 bus 4
bnx1 at pci14 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 2 int 16
(irq 5), address 00:15:c5:ef:2a:75
brgphy1 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 2 int 21
(irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 2 int 20
(irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 2 int 21
(irq 11)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 2 int 21
(irq 11)
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb14 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci15 at ppb14 bus 15
vga1 at pci15 dev 13 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, CDRW/DVD TSL462D, DE01> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask 0 netmask 0 ttymask 0
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhub4 at uhub3 port 5
uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
uhub4: 4 ports with 4 removable, self powered, multiple transaction
translators
uhidev0 at uhub4 port 2 configuration 1 interface 0
uhidev0: DELL DELL USB Keyboard, rev 1.10/1.04, addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
cpu1: unknown Core FSB_FREQ value 0 (0xc188149f)
NOTA DI RISERVATEZZA
Questo messaggio e i suoi allegati sono destinati esclusivamente
alle persone in indirizzo e puo' contenere informazioni riservate.
Se avete ricevuto il messaggio per errore, Vi informiamo che
qualsiasi utilizzo dei contenuti della presente e' assolutamente
vietato. Vi invitiamo a rispedire immediatamente la mail al
mittente e a distruggere il messaggio. Per qualsiasi dubbio, Vi
invitiamo a contattarci rispondendo a [EMAIL PROTECTED]
Grazie www.sirti.it
CONFIDENTIALITY NOTICE
This message and its attachments are addressed solely to the
persons above and may contain confidential information. If you have
received the message in error, be informed that any use of the
content hereof is prohibited. Please return it immediately to the
sender and delete the message. Should you have any questions,
please contact us by replying to [EMAIL PROTECTED]
Thank you www.sirti.it
