On Wed, 11 Apr 2007, James Hartley wrote: > On 4/11/07, Otto Moerbeek <[EMAIL PROTECTED]> wrote: > > > > Very likely you Sun uses different serial ports than cua00. Check your > > dmesg to see which driver is uses, then use the driver man page to > > determine the /dev node to use. > > > > I'm must be blind for I'm not seeing anything. dmesg below:
sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2 sabtty0 at sab0 port 0 sabtty1 at sab0 port 1 man sab gives: /dev/ttyh[0-1] No separate callout device, it looks like. -Otto > > console is keyboard/display > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2006 OpenBSD. All rights reserved. > http://www.OpenBSD.org > > OpenBSD 4.0 (GENERIC) #953: Sun Sep 17 00:56:22 MDT 2006 > [EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC > total memory = 536870912 > avail memory = 479698944 > using 3276 buffers containing 26836992 bytes of memory > bootpath: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0/[EMAIL > PROTECTED],0 > mainbus0 (root): Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz) > cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 440 MHz, version 0 FPU > cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 2048K external > (64 b/l) > psycho0 at mainbus0 addr 0xfffc4000: SUNW,sabre, impl 0, version 0, ign 7c0 > psycho0: bus range 0-2, PCI bus 0 > psycho0: dvma map c0000000-dfffffff, iotdb 26a8000-2728000 > pci0 at psycho0 > ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13 > pci1 at ppb0 bus 1 > ebus0 at pci1 dev 1 function 0 "Sun PCIO Ebus2" rev 0x01 > auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, > 72c000-72c003, 72f000-72f003 > power0 at ebus0 addr 724000-724003 ipl 37 > "SUNW,pll" at ebus0 addr 504000-504002 not configured > sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2 > sabtty0 at sab0 port 0 > sabtty1 at sab0 port 1 > comkbd0 at ebus0 addr 3083f8-3083ff ipl 41: layout 33 > wskbd0 at comkbd0: console keyboard > com0 at ebus0 addr 3062f8-3062ff ipl 42: mouse: ns16550a, 16 byte fifo > lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 34: > polled > "fdthree" at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39 > not configured > clock1 at ebus0 addr 0-1fff: mk48t59 > "flashprom" at ebus0 addr 0-fffff not configured > audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, > 722000-722003 ipl 35 ipl 36: nva > ddrs 0 > audio0 at audioce0 > hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address > 08:00:20:c1:66:b7 > nsphy0 at hme0 phy 1: DP83840 10/100 PHY, rev. 1 > vgafb0 at pci1 dev 2 function 0 "ATI Mach64 GP" rev 0x5c > wsdisplay0 at vgafb0: console (std, sun emulation), using wskbd0 > pciide0 at pci1 dev 3 function 0 "CMD Technology PCI0646" rev 0x03: DMA, > channel 0 configured to nat > ive-PCI, channel 1 configured to native-PCI > pciide0: using ivec 0x7e0 for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <ST3160023A> > wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <PLEXTOR, DVDR PX-716A, 1.08> SCSI0 5/cdrom > removable > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 > ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13 > pci2 at ppb1 bus 2 > ohci0 at pci2 dev 1 function 0 "NEC USB" rev 0x43: ivec 0x7d0, version 1.0 > usb0 at ohci0: USB revision 1.0 > uhub0 at usb0 > uhub0: NEC OHCI root hub, rev 1.00/1.00, addr 1 > uhub0: 3 ports with 3 removable, self powered > ohci1 at pci2 dev 1 function 1 "NEC USB" rev 0x43: ivec 0x7d1, version 1.0 > usb1 at ohci1: USB revision 1.0 > uhub1 at usb1 > uhub1: NEC OHCI root hub, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > ehci0 at pci2 dev 1 function 2 "NEC USB" rev 0x04: ivec 0x7d2 > usb2 at ehci0: USB revision 2.0 > uhub2 at usb2 > uhub2: NEC EHCI root hub, rev 2.00/1.00, addr 1 > uhub2: 5 ports with 5 removable, self powered > pcons at mainbus0 not configured > No counter-timer -- using %tick at 440MHz as system clock. > root on wd0a > rootdev=0xc00 rrootdev=0x1a00 rawdev=0x1a02 > syncing disks...