On 4/12/07, Kalle Andersson <[EMAIL PROTECTED]> wrote:
Hello Misc!
I have a 2 HP DL380 G4 where the ciss bio stuff behaves differently...
Im hoping someone can give me a clue...
box1:
# bioctl ciss0
Volume Status Size Device
ciss0 0 Online 293617820160 sd0 RAID5
0 Online 146811543552 1:0.0 noencl <COMPAQ BD14689BB9 >
1 Online 146811543552 1:1.0 noencl <COMPAQ BD14689BB9 >
2 Online 146811543552 1:2.0 noencl <COMPAQ BD14689BB9 >
3 Hot spare 146811543552 1:3.0 noencl <COMPAQ BD14689BB9 >
box2:
# bioctl ciss0
bioctl: Can't locate ciss0 device via /dev/bio
Only difference I can see that might have something to do with it is:
box1: ciss0: 1 LD, HW rev 1, FW 2.58/2.58
box2: ciss0: 2 LDs, HW rev 1, FW 2.68/2.68
Is box2's bio not working because the 2.68 FW or that it has two logical drives?
Is FW 2.68 going to be supported or should I try to downgrade (if that
even is possible)?
Two logical drives. Not sure about the firmware version, but the
"more than one logical drive" issue is in the caveats section of
ciss(4).
--Bill