Hi,
Is there any progress to support DMA on this chipset?
I successfully boot 4.1-current in a Dell OptiPlex 320. Everything are
working fine, inclusive both processors (Pentium4-D) using ACPI.
I attached my dmesg.
Thanks in advance.
OpenBSD 4.1-current (GENERIC.MP) #1181: Fri Apr 6 01:54:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1038069760 (1013740K)
avail mem = 877154304 (856596K)
using 22937 buffers containing 104013824 bytes (101576K) of memory
User Kernel Config
UKC> disable apm
UKC> enable acpi
256 acpi0 enabled
UKC> quit
Continuing...
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0450 (68 entries)
bios0: Dell Inc. OptiPlex 320
acpi0 at mainbus0: rev 2
acpi0: tables DSDT FACP SSDT APIC BOOT MCFG HPET SLIC
acpitimer at acpi0 not configured
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) D CPU 3.00GHz, 3000.50 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 3.00GHz, 3000.11 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0 apid 8 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpiprt0 at acpi0: bus 1 (PCI1)
acpiprt1 at acpi0: bus 0 (PCI2)
acpiprt2 at acpi0: bus 0 (PCI3)
acpiprt3 at acpi0: bus 0 (PCI4)
acpiprt4 at acpi0: bus 0 (PCI5)
acpiprt5 at acpi0: bus 0 (PCI6)
acpiprt6 at acpi0: bus 0 (PCI8)
acpiprt7 at acpi0: bus 2 (PCI7)
acpiprt8 at acpi0: bus 0 (PCI0)
acpibtn at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 vendor "ATI", unknown product 0x5a33 rev 0x01
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 18 function 0 "ATI IXP600 SATA" rev 0x00: DMA
(unsupported), channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide0: using apic 8 int 22 (irq 11) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HD080HJ/P>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
pciide0: channel 1 ignored (not responding; disabled or no drives?)
ohci0 at pci0 dev 19 function 0 "ATI IXP600 USB" rev 0x00: apic 8 int 16 (irq
10), version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI IXP600 USB" rev 0x00: apic 8 int 17 (irq
5), version 1.0, legacy support
ohci2 at pci0 dev 19 function 2 "ATI IXP600 USB" rev 0x00: apic 8 int 18 (irq
4), version 1.0, legacy support
ohci3 at pci0 dev 19 function 3 "ATI IXP600 USB" rev 0x00: apic 8 int 17 (irq
5), version 1.0, legacy support
ohci4 at pci0 dev 19 function 4 "ATI IXP600 USB" rev 0x00: apic 8 int 18 (irq
4), version 1.0, legacy support
ehci0 at pci0 dev 19 function 5 "ATI IXP600 USB2" rev 0x00: apic 8 int 19 (irq
3)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0
uhub0: ATI EHCI root hub, rev 2.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
"ATI IXP600 SMBus" rev 0x13 at pci0 dev 20 function 0 not configured
pciide1 at pci0 dev 20 function 1 "ATI IXP600 IDE" rev 0x00: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDRWDVD TS-H492C, DE02> SCSI0 5/cdrom
removable
cd0(pciide1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
azalia0 at pci0 dev 20 function 2 "ATI IXP600 HD Audio" rev 0x00: apic 8 int 16
(irq 10)
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Analog Devices AD1983 (rev. 4.0), HDA version 1.0
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI IXP600 LPC" rev 0x00
ppb1 at pci0 dev 20 function 4 "ATI IXP600 PCI" rev 0x00
pci2 at ppb1 bus 2
bce0 at pci2 dev 9 function 0 "Broadcom BCM4401B0" rev 0x02: apic 8 int 21 (irq
11), address 00:15:c5:35:eb:78
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
usb1 at ohci0: USB revision 1.0
uhub1 at usb1
uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
usb2 at ohci1: USB revision 1.0
uhub2 at usb2
uhub2: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
usb3 at ohci2: USB revision 1.0
uhub3 at usb3
uhub3: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
usb4 at ohci3: USB revision 1.0
uhub4 at usb4
uhub4: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
usb5 at ohci4: USB revision 1.0
uhub5 at usb5
uhub5: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Dell Dell USB Keyboard, rev 1.10/3.01, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 0
uhidev1: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
