On Mon, 23 Apr 2007 14:42:01 +0200 Han Boetes <[EMAIL PROTECTED]> wrote:
You are dealing with a hardware problem. Suspect both the disc and/or the controller. > Otto Moerbeek wrote: > > On Mon, 23 Apr 2007, Han Boetes wrote: > > > Of course I crash, I crash at every reboot, I got the problem > > > where the rebooting proces gets stuck at `syncing disks' after > > > which I have to m-c-ESC and then boot sync. > > > > > > I have this on a i386 and I met someone on #openbsd who had it > > > on a sparc. > > > > > > When will this bug be fixed? > > > > After you provide a proper report? > > About 50% of the shutdowns get stuck at `syncing discs...' The > only filesystem which is marked dirty is / > > Here is the output of `dmesg > dmesg'. Yes dmesg remembers the > output of the previous boot on my system. And this time it didn't > happen. > > Anything else you'd like to know? Would you like me to post this > one with sendbug? > > > ontaining 40366080 bytes (39420K) of memory > mainbus0 (root) > bios0 at mainbus0: AT/286+ BIOS, date 03/28/02, BIOS32 rev. 0 @ 0xfdad0, > SMBIOS rev. 2.3 @ 0xf0630 (22 entries) > bios0: MSI MS-6380E > apm0 at bios0: Power Management spec V1.2 > apm0: AC on, battery charge unknown > apm0: flags 30102 dobusy 0 doidle 1 > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7f00/192 (10 entries) > pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8233 ISA" rev 0x00) > pcibios0: PCI bus #1 is the last bus > bios0: ROM list: 0xc0000/0xf800 > acpi at mainbus0 not configured > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00 > ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "NVIDIA GeForce4 MX 4000" rev 0xa4 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > uhci0 at pci0 dev 6 function 0 "VIA VT83C572 USB" rev 0x50: irq 5 > uhci1 at pci0 dev 6 function 1 "VIA VT83C572 USB" rev 0x50: irq 12 > ehci0 at pci0 dev 6 function 2 "VIA VT6202 USB" rev 0x51: irq 10 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 > uhub0: VIA EHCI root hub, rev 2.00/1.00, addr 1 > uhub0: 4 ports with 4 removable, self powered > re0 at pci0 dev 7 function 0 "Realtek 8169" rev 0x10: RTL8169S (0x0400), irq > 12, address 00:08:a1:3c:34:7a > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0 > rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 5, address > 00:e0:4c:67:52:80 > rlphy0 at rl0 phy 0: RTL internal PHY > viapm0 at pci0 dev 17 function 0 "VIA VT8233A ISA" rev 0x00 > iic0 at viapm0 > iic0: addr 0x2f 00=00 02=0f 03=00 04=00 06=0f 07=00 08=00 0a=06 0b=00 0c=00 > 0d=07 0e=84 0f=00 10=c0 11=11 12=00 13=60 > pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, > channel 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0> > wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors > wd1 at pciide0 channel 0 drive 1: <Maxtor 6L250R0> > wd1: 16-sector PIO, LBA48, 239372MB, 490234752 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6 > atapiscsi0 at pciide0 channel 1 drive 1 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <LITE-ON, LTR-40125S, ZS0N> SCSI0 5/cdrom > removable > cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 > uhci2 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 10 > uhci3 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 10 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 > uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 > uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 > uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 > uhub4: VIA UHCI root hub, rev 1.00/1.00, addr 1 > uhub4: 2 ports with 2 removable, self powered > isa0 at mainbus0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lm0 at isa0 port 0x290/8: W83697HF > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > biomask fffd netmask fffd ttymask ffff > pctr: user-level cycle counter enabled > mtrr: Pentium Pro MTRR support > wd0c: aborted command, interface CRC error reading fsbn 64 (wd0 bn 64; cn 0 > tn 1 sn 1), retrying > wd0: transfer error, downgrading to Ultra-DMA mode 5 > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6 > wd0c: aborted command, interface CRC error reading fsbn 64 (wd0 bn 64; cn 0 > tn 1 sn 1), retrying > wd0: soft error (corrected) > dkcsum: wd0 matches BIOS drive 0x80 > dkcsum: wd1 matches BIOS drive 0x81 > root on wd0a > rootdev=0x0 rrootdev=0x300 rawdev=0x302 > wd0: transfer error, downgrading to Ultra-DMA mode 4 > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6 > wd0a: aborted command, interface CRC error reading fsbn 96 of 96-0 (wd0 bn > 159; cn 0 tn 2 sn 33), retrying > wd0: transfer error, downgrading to Ultra-DMA mode 3 > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 3 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6 > wd0a: aborted command, interface CRC error reading fsbn 96 of 96-0 (wd0 bn > 159; cn 0 tn 2 sn 33), retrying > wd0: soft error (corrected) > wd0: transfer error, downgrading to Ultra-DMA mode 2 > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 > wd0a: aborted command, interface CRC error writing fsbn 16 of 16-0 (wd0 bn > 79; cn 0 tn 1 sn 16), retrying > wd0: soft error (corrected) > cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0 > SENSE KEY: Not Ready > ASC/ASCQ: Medium Not Present > syncing disks... done > > The operating system has halted. > Please press any key to reboot. > > rebooting... > OpenBSD 4.1-current (GENERIC) #5: Sun Apr 22 01:44:59 MDT 2007 > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: AMD Athlon(tm) XP 1700+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.47 > GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE > real mem = 804810752 (785948K) > avail mem = 725520384 (708516K) > using 4278 buffers containing 40366080 bytes (39420K) of memory > mainbus0 (root) > bios0 at mainbus0: AT/286+ BIOS, date 03/28/02, BIOS32 rev. 0 @ 0xfdad0, > SMBIOS rev. 2.3 @ 0xf0630 (22 entries) > bios0: MSI MS-6380E > apm0 at bios0: Power Management spec V1.2 > apm0: AC on, battery charge unknown > apm0: flags 30102 dobusy 0 doidle 1 > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7f00/192 (10 entries) > pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8233 ISA" rev 0x00) > pcibios0: PCI bus #1 is the last bus > bios0: ROM list: 0xc0000/0xf800 > acpi at mainbus0 not configured > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00 > ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "NVIDIA GeForce4 MX 4000" rev 0xa4 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > uhci0 at pci0 dev 6 function 0 "VIA VT83C572 USB" rev 0x50: irq 5 > uhci1 at pci0 dev 6 function 1 "VIA VT83C572 USB" rev 0x50: irq 12 > ehci0 at pci0 dev 6 function 2 "VIA VT6202 USB" rev 0x51: irq 10 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 > uhub0: VIA EHCI root hub, rev 2.00/1.00, addr 1 > uhub0: 4 ports with 4 removable, self powered > re0 at pci0 dev 7 function 0 "Realtek 8169" rev 0x10: RTL8169S (0x0400), irq > 12, address 00:08:a1:3c:34:7a > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0 > rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 5, address > 00:e0:4c:67:52:80 > rlphy0 at rl0 phy 0: RTL internal PHY > viapm0 at pci0 dev 17 function 0 "VIA VT8233A ISA" rev 0x00 > iic0 at viapm0 > iic0: addr 0x2f 00=00 02=0f 03=00 04=00 06=0f 07=00 08=00 0a=06 0b=00 0c=00 > 0d=07 0e=84 0f=00 10=c0 11=11 12=00 13=60 > pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, > channel 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0> > wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors > wd1 at pciide0 channel 0 drive 1: <Maxtor 6L250R0> > wd1: 16-sector PIO, LBA48, 239372MB, 490234752 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6 > atapiscsi0 at pciide0 channel 1 drive 1 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <LITE-ON, LTR-40125S, ZS0N> SCSI0 5/cdrom > removable > cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 > uhci2 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 10 > uhci3 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 10 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 > uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 > uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 > uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 > uhub4: VIA UHCI root hub, rev 1.00/1.00, addr 1 > uhub4: 2 ports with 2 removable, self powered > isa0 at mainbus0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lm0 at isa0 port 0x290/8: W83697HF > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > biomask fffd netmask fffd ttymask ffff > pctr: user-level cycle counter enabled > mtrr: Pentium Pro MTRR support > wd0c: aborted command, interface CRC error reading fsbn 64 (wd0 bn 64; cn 0 > tn 1 sn 1), retrying > wd0: transfer error, downgrading to Ultra-DMA mode 5 > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6 > wd0c: aborted command, interface CRC error reading fsbn 64 (wd0 bn 64; cn 0 > tn 1 sn 1), retrying > wd0: soft error (corrected) > dkcsum: wd0 matches BIOS drive 0x80 > dkcsum: wd1 matches BIOS drive 0x81 > root on wd0a > rootdev=0x0 rrootdev=0x300 rawdev=0x302 > wd0: transfer error, downgrading to Ultra-DMA mode 4 > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6 > wd0a: aborted command, interface CRC error reading fsbn 96 of 96-0 (wd0 bn > 159; cn 0 tn 2 sn 33), retrying > wd0: transfer error, downgrading to Ultra-DMA mode 3 > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 3 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6 > wd0a: aborted command, interface CRC error reading fsbn 96 of 96-0 (wd0 bn > 159; cn 0 tn 2 sn 33), retrying > wd0: soft error (corrected) > wd0: transfer error, downgrading to Ultra-DMA mode 2 > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 > wd0a: aborted command, interface CRC error writing fsbn 16 of 16-0 (wd0 bn > 79; cn 0 tn 1 sn 16), retrying > wd0: soft error (corrected) > cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0 > SENSE KEY: Not Ready > ASC/ASCQ: Medium Not Present > syncing disks... Stopped at Debugger+0x4: leave > ddb> rebooting... > OpenBSD 4.1-current (GENERIC) #5: Sun Apr 22 01:44:59 MDT 2007 > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: AMD Athlon(tm) XP 1700+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.47 > GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE > real mem = 804810752 (785948K) > avail mem = 725520384 (708516K) > using 4278 buffers containing 40366080 bytes (39420K) of memory > mainbus0 (root) > bios0 at mainbus0: AT/286+ BIOS, date 03/28/02, BIOS32 rev. 0 @ 0xfdad0, > SMBIOS rev. 2.3 @ 0xf0630 (22 entries) > bios0: MSI MS-6380E > apm0 at bios0: Power Management spec V1.2 > apm0: AC on, battery charge unknown > apm0: flags 30102 dobusy 0 doidle 1 > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7f00/192 (10 entries) > pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8233 ISA" rev 0x00) > pcibios0: PCI bus #1 is the last bus > bios0: ROM list: 0xc0000/0xf800 > acpi at mainbus0 not configured > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00 > ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "NVIDIA GeForce4 MX 4000" rev 0xa4 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > uhci0 at pci0 dev 6 function 0 "VIA VT83C572 USB" rev 0x50: irq 5 > uhci1 at pci0 dev 6 function 1 "VIA VT83C572 USB" rev 0x50: irq 12 > ehci0 at pci0 dev 6 function 2 "VIA VT6202 USB" rev 0x51: irq 10 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 > uhub0: VIA EHCI root hub, rev 2.00/1.00, addr 1 > uhub0: 4 ports with 4 removable, self powered > re0 at pci0 dev 7 function 0 "Realtek 8169" rev 0x10: RTL8169S (0x0400), irq > 12, address 00:08:a1:3c:34:7a > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0 > rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 5, address > 00:e0:4c:67:52:80 > rlphy0 at rl0 phy 0: RTL internal PHY > viapm0 at pci0 dev 17 function 0 "VIA VT8233A ISA" rev 0x00 > iic0 at viapm0 > iic0: addr 0x2f 00=00 02=0f 03=00 04=00 06=0f 07=00 08=00 0a=06 0b=00 0c=00 > 0d=07 0e=84 0f=00 10=c0 11=11 12=00 13=60 > pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, > channel 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0> > wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors > wd1 at pciide0 channel 0 drive 1: <Maxtor 6L250R0> > wd1: 16-sector PIO, LBA48, 239372MB, 490234752 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6 > atapiscsi0 at pciide0 channel 1 drive 1 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <LITE-ON, LTR-40125S, ZS0N> SCSI0 5/cdrom > removable > cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 > uhci2 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 10 > uhci3 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 10 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 > uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 > uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 > uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 > uhub4: VIA UHCI root hub, rev 1.00/1.00, addr 1 > uhub4: 2 ports with 2 removable, self powered > isa0 at mainbus0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lm0 at isa0 port 0x290/8: W83697HF > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > biomask fffd netmask fffd ttymask ffff > pctr: user-level cycle counter enabled > mtrr: Pentium Pro MTRR support > wd0c: aborted command, interface CRC error reading fsbn 64 (wd0 bn 64; cn 0 > tn 1 sn 1), retrying > wd0: transfer error, downgrading to Ultra-DMA mode 5 > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6 > wd0c: aborted command, interface CRC error reading fsbn 64 (wd0 bn 64; cn 0 > tn 1 sn 1), retrying > wd0: soft error (corrected) > dkcsum: wd0 matches BIOS drive 0x80 > dkcsum: wd1 matches BIOS drive 0x81 > root on wd0a > rootdev=0x0 rrootdev=0x300 rawdev=0x302 > WARNING: / was not properly unmounted > wd0: transfer error, downgrading to Ultra-DMA mode 4 > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6 > wd0a: aborted command, interface CRC error reading fsbn 96 of 96-0 (wd0 bn > 159; cn 0 tn 2 sn 33), retrying > wd0: transfer error, downgrading to Ultra-DMA mode 3 > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 3 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6 > wd0a: aborted command, interface CRC error reading fsbn 96 of 96-0 (wd0 bn > 159; cn 0 tn 2 sn 33), retrying > wd0: soft error (corrected) > wd0: transfer error, downgrading to Ultra-DMA mode 2 > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 > wd0a: aborted command, interface CRC error writing fsbn 16 of 16-0 (wd0 bn > 79; cn 0 tn 1 sn 16), retrying > wd0: soft error (corrected) > cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0 > SENSE KEY: Not Ready > ASC/ASCQ: Medium Not Present > > > > # Han > > -- Best and kind regards Rico Secada