Not sent to bugs@ because I'm not sure it could do much there. I'm hoping someone may be able to give hints on what to check, so I can resolve this small issue.
I have a directory with 8000 .jpg's. I run ImageMagick over these to cut out a certain section in order to later make an .avi out of them. Yet my kernel freezes up. Observed in X and in console. [1]No drop to DDB because the USB keyboard is disabled from dropping into DDB (I do not have a serial console device). Here is the script: --- #!/bin/sh for i in 1*jpg; do convert -resize 1024x768 -extract 1200x1000+300+0 $i AA$i done -- I've not experienced any freezeups on the previous kernel from a month ago, so it may (or not) be from something that's changed since. Here is what I've done to cross-check what the problem may be: * I checked source trees for anything that went in the last 5 weeks but did not find anything that may be the culprit at first glance. * I've booted the kernel with boot -d in order to set break points (mainly wd and ata stuff) because on my USB keyboard I cannot enter into DDB from console. This is to debug. It didn't show anything when I stabbed into it. * I've disabled nviic and other i2c stuff and that wasn't it. * I've removed the only hardware card in the system in order to make sure it's not the ahc driver. * disabling apmd because of changes to hw_setperf code still froze the kernel. All finger pointings and penetrations into finding the problem have resulted in a NO-GO and I still get Kernel FREEZE UPS! (Infinite loops?) see reference [1] (can't drop to DDB). There are no messages in the logs about any bad hardware. dmesg of current kernel OpenBSD 4.1-current (GENERIC) #970: Thu May 3 02:01:25 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 1073278976 (1048124K) avail mem = 907788288 (886512K) using 22937 buffers containing 107536384 bytes (105016K) of memory mainbus0 (root) bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0000 (39 entries) bios0: MICRO-STAR INTERNATIONAL CO., LTD MS-7125 acpi at mainbus0 not configured cpu0 at mainbus0: (uniprocessor) cpu0: AMD Athlon(tm) 64 Processor 3500+, 2211.57 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: Cool'n'Quiet K8 2211 MHz: speeds: 2200 2000 1800 1000 MHz cpu0: AMD errata 86, 89, 97, 104 present, BIOS upgrade may be required pci0 at mainbus0 bus 0: configuration mode 1 "NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3 nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2 iic0 at nviic0 iic1 at nviic0 iic1: addr 0x2f 00=84 01=0f 02=10 03=00 04=07 05=20 06=18 07=00 08=00 14=14 15=62 16=02 17=05 ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: irq 10, version 1.0, legacy support ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: irq 11 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 uhub0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1 uhub0: 10 ports with 10 removable, self powered auich0 at pci0 dev 4 function 0 "NVIDIA nForce4 AC97" rev 0xa2: irq 5, nForce4 AC97 ac97: codec id 0x414c4790 (Avance Logic ALC850 rev 0) audio0 at auich0 pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xa2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility pciide0: channel 0 disabled (no drives) atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <E-IDE, CD-ROM 40X/AKU, F02> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA pciide1: using irq 10 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <SAMSUNG HD080HJ> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 wd1 at pciide1 channel 1 drive 0: <SAMSUNG HD160JJ> wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5 pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA pciide2: using irq 11 for native-PCI interrupt atapiscsi1 at pciide2 channel 0 drive 0 scsibus1 at atapiscsi1: 2 targets cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-RAM GSA-H30N, 1.01> SCSI0 5/cdrom removable cd1(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 5 ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2 pci1 at ppb0 bus 1 nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: irq 3, address 00:0c:76:50:a9:48 eephy0 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2 ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3 pci2 at ppb1 bus 2 ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3 pci3 at ppb2 bus 3 ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3 pci4 at ppb3 bus 4 ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3 pci5 at ppb4 bus 5 vga1 at pci5 dev 0 function 0 vendor "NVIDIA", unknown product 0x016a rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 lm0 at isa0 port 0x290/8: W83627THF fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec usb1 at ohci0: USB revision 1.0 uhub1 at usb1 uhub1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1 uhub1: 10 ports with 10 removable, self powered uplcom0 at uhub1 port 1 uplcom0: ATEN International Serial, rev 1.10/0.01, addr 2 ucom0 at uplcom0 uhidev0 at uhub1 port 2 configuration 1 interface 0 uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 3, iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 uhub2 at uhub1 port 4 uhub2: ALCOR macally Kbd Hub, rev 1.10/1.00, addr 4 uhub2: 3 ports with 2 removable, bus powered uhidev1 at uhub2 port 1 configuration 1 interface 0 uhidev1: ALCOR macally Kbd Hub, rev 1.10/1.00, addr 5, iclass 3/1 ukbd0 at uhidev1: 8 modifier keys, 6 key codes, country code 1 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhub3 at uhub1 port 5 uhub3: Atmel UHB124 hub, rev 1.10/3.00, addr 6 uhub3: 4 ports with 4 removable, self powered uscanner0 at uhub1 port 6 uscanner0: EPSON EPSON Scanner, rev 1.10/1.00, addr 7 dkcsum: wd0 matches BIOS drive 0x80 dkcsum: wd1 matches BIOS drive 0x81 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 WARNING: / was not properly unmounted wd1(pciide1:1:0): timeout type: ata c_bcount: 0 c_skip: 0 wd1: flush cache command timeout dmesg of last kernel May 4 00:12:49 oberon /bsd: OpenBSD 4.1-current (OBERON) #2: Thu Apr 5 08:38:28 CEST 2007 May 4 00:12:50 oberon /bsd: [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/OBERON May 4 00:12:50 oberon /bsd: real mem = 1073278976 (1048124K) May 4 00:12:50 oberon /bsd: avail mem = 907837440 (886560K) May 4 00:12:50 oberon /bsd: using 22937 buffers containing 107536384 bytes (105016K) of memory May 4 00:12:50 oberon /bsd: mainbus0 (root) May 4 00:12:50 oberon /bsd: bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0000 (39 entries) May 4 00:12:50 oberon /bsd: bios0: MICRO-STAR INTERNATIONAL CO., LTD MS-7125 May 4 00:12:50 oberon /bsd: acpi at mainbus0 not configured May 4 00:12:50 oberon /bsd: cpu0 at mainbus0: (uniprocessor) May 4 00:12:50 oberon /bsd: cpu0: AMD Athlon(tm) 64 Processor 3500+, 2211.58 MHz May 4 00:12:50 oberon /bsd: cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW May 4 00:12:50 oberon /bsd: cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache May 4 00:12:50 oberon /bsd: cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative May 4 00:12:50 oberon /bsd: cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative May 4 00:12:50 oberon /bsd: cpu0: Cool'n'Quiet K8 2211 MHz: speeds: 2200 2000 1800 1000 MHz May 4 00:12:50 oberon /bsd: cpu0: AMD errata 86, 89, 97, 104 present, BIOS upgrade may be required May 4 00:12:50 oberon /bsd: pci0 at mainbus0 bus 0: configuration mode 1 May 4 00:12:50 oberon /bsd: "NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured May 4 00:12:50 oberon /bsd: pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3 May 4 00:12:50 oberon /bsd: nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2 May 4 00:12:50 oberon /bsd: iic0 at nviic0 May 4 00:12:50 oberon /bsd: iic1 at nviic0 May 4 00:12:50 oberon /bsd: iic1: addr 0x2f 00=84 01=0f 02=10 03=00 04=07 05=20 06=18 07=00 08=00 14=14 15=62 16=02 17=05 May 4 00:12:50 oberon /bsd: ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: irq 12, version 1.0, legacy support May 4 00:12:50 oberon /bsd: ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: irq 10 May 4 00:12:50 oberon /bsd: usb0 at ehci0: USB revision 2.0 May 4 00:12:50 oberon /bsd: uhub0 at usb0 May 4 00:12:50 oberon /bsd: uhub0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1 May 4 00:12:50 oberon /bsd: uhub0: 10 ports with 10 removable, self powered May 4 00:12:50 oberon /bsd: auich0 at pci0 dev 4 function 0 "NVIDIA nForce4 AC97" rev 0xa2: irq 3, nForce4 AC97 May 4 00:12:50 oberon /bsd: ac97: codec id 0x414c4790 (Avance Logic ALC850 rev 0) May 4 00:12:50 oberon /bsd: audio0 at auich0 May 4 00:12:50 oberon /bsd: pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xa2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility May 4 00:12:50 oberon /bsd: pciide0: channel 0 disabled (no drives) May 4 00:12:50 oberon /bsd: atapiscsi0 at pciide0 channel 1 drive 0 May 4 00:12:50 oberon /bsd: scsibus0 at atapiscsi0: 2 targets May 4 00:12:50 oberon /bsd: cd0 at scsibus0 targ 0 lun 0: <E-IDE, CD-ROM 40X/AKU, F02> SCSI0 5/cdrom removable May 4 00:12:50 oberon /bsd: cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 May 4 00:12:50 oberon /bsd: pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA May 4 00:12:50 oberon /bsd: pciide1: using irq 12 for native-PCI interrupt May 4 00:12:50 oberon /bsd: wd0 at pciide1 channel 0 drive 0: <SAMSUNG HD080HJ> May 4 00:12:50 oberon /bsd: wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors May 4 00:12:50 oberon /bsd: wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 May 4 00:12:50 oberon /bsd: wd1 at pciide1 channel 1 drive 0: <SAMSUNG HD160JJ> May 4 00:12:50 oberon /bsd: wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors May 4 00:12:50 oberon /bsd: wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5 May 4 00:12:50 oberon /bsd: pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA May 4 00:12:50 oberon /bsd: pciide2: using irq 10 for native-PCI interrupt May 4 00:12:50 oberon /bsd: atapiscsi1 at pciide2 channel 0 drive 0 May 4 00:12:50 oberon /bsd: scsibus1 at atapiscsi1: 2 targets May 4 00:12:50 oberon /bsd: cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-RAM GSA-H30N, 1.01> SCSI0 5/cdrom removable May 4 00:12:50 oberon /bsd: cd1(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 5 May 4 00:12:50 oberon /bsd: ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2 May 4 00:12:50 oberon /bsd: pci1 at ppb0 bus 1 May 4 00:12:50 oberon /bsd: ahc0 at pci1 dev 7 function 0 "Adaptec AHA-2940AU" rev 0x01: irq 11 May 4 00:12:50 oberon /bsd: scsibus2 at ahc0: 8 targets May 4 00:12:50 oberon /bsd: nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: irq 11, address 00:0c:76:50:a9:48 May 4 00:12:50 oberon /bsd: eephy0 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2 May 4 00:12:50 oberon /bsd: ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3 May 4 00:12:50 oberon /bsd: pci2 at ppb1 bus 2 May 4 00:12:50 oberon /bsd: ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3 May 4 00:12:50 oberon /bsd: pci3 at ppb2 bus 3 May 4 00:12:50 oberon /bsd: ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3 May 4 00:12:50 oberon /bsd: pci4 at ppb3 bus 4 May 4 00:12:50 oberon /bsd: ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3 May 4 00:12:50 oberon /bsd: pci5 at ppb4 bus 5 May 4 00:12:50 oberon /bsd: vga1 at pci5 dev 0 function 0 vendor "NVIDIA", unknown product 0x016a rev 0xa1 May 4 00:12:50 oberon /bsd: wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) May 4 00:12:50 oberon /bsd: wsdisplay0: screen 1-5 added (80x25, vt100 emulation) May 4 00:12:50 oberon /bsd: pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 May 4 00:12:50 oberon /bsd: pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 May 4 00:12:50 oberon /bsd: pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 May 4 00:12:50 oberon /bsd: pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 May 4 00:12:50 oberon /bsd: isa0 at pcib0 May 4 00:12:50 oberon /bsd: isadma0 at isa0 May 4 00:12:50 oberon /bsd: com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo May 4 00:12:50 oberon /bsd: pckbc0 at isa0 port 0x60/5 May 4 00:12:50 oberon /bsd: pckbd0 at pckbc0 (kbd slot) May 4 00:12:50 oberon /bsd: pckbc0: using irq 1 for kbd slot May 4 00:12:50 oberon /bsd: wskbd0 at pckbd0: console keyboard, using wsdisplay0 May 4 00:12:50 oberon /bsd: pcppi0 at isa0 port 0x61 May 4 00:12:50 oberon /bsd: midi0 at pcppi0: <PC speaker> May 4 00:12:50 oberon /bsd: spkr0 at pcppi0 May 4 00:12:50 oberon /bsd: lpt0 at isa0 port 0x378/4 irq 7 May 4 00:12:50 oberon /bsd: lm0 at isa0 port 0x290/8: W83627THF May 4 00:12:50 oberon /bsd: fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 May 4 00:12:50 oberon /bsd: fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec May 4 00:12:50 oberon /bsd: usb1 at ohci0: USB revision 1.0 May 4 00:12:50 oberon /bsd: uhub1 at usb1 May 4 00:12:50 oberon /bsd: uhub1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1 May 4 00:12:50 oberon /bsd: uhub1: 10 ports with 10 removable, self powered May 4 00:12:50 oberon /bsd: uplcom0 at uhub1 port 1 May 4 00:12:50 oberon /bsd: uplcom0: ATEN International Serial, rev 1.10/0.01, addr 2 May 4 00:12:50 oberon /bsd: ucom0 at uplcom0 May 4 00:12:50 oberon /bsd: uhidev0 at uhub1 port 2 configuration 1 interface 0 May 4 00:12:50 oberon /bsd: uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 3, iclass 3/1 May 4 00:12:50 oberon /bsd: ums0 at uhidev0: 3 buttons and Z dir. May 4 00:12:50 oberon /bsd: wsmouse0 at ums0 mux 0 May 4 00:12:50 oberon /bsd: uhub2 at uhub1 port 4 May 4 00:12:50 oberon /bsd: uhub2: ALCOR macally Kbd Hub, rev 1.10/1.00, addr 4 May 4 00:12:50 oberon /bsd: uhub2: 3 ports with 2 removable, bus powered May 4 00:12:50 oberon /bsd: uhidev1 at uhub2 port 1 configuration 1 interface 0 May 4 00:12:50 oberon /bsd: uhidev1: ALCOR macally Kbd Hub, rev 1.10/1.00, addr 5, iclass 3/1 May 4 00:12:50 oberon /bsd: ukbd0 at uhidev1: 8 modifier keys, 6 key codes, country code 1 May 4 00:12:50 oberon /bsd: wskbd1 at ukbd0 mux 1 May 4 00:12:50 oberon /bsd: wskbd1: connecting to wsdisplay0 May 4 00:12:50 oberon /bsd: uhub3 at uhub1 port 5 May 4 00:12:50 oberon /bsd: uhub3: Atmel UHB124 hub, rev 1.10/3.00, addr 6 May 4 00:12:50 oberon /bsd: uhub3: 4 ports with 4 removable, self powered May 4 00:12:50 oberon /bsd: uscanner0 at uhub1 port 6 May 4 00:12:50 oberon /bsd: uscanner0: EPSON EPSON Scanner, rev 1.10/1.00, addr 7 May 4 00:12:50 oberon /bsd: dkcsum: wd0 matches BIOS drive 0x80 May 4 00:12:50 oberon /bsd: dkcsum: wd1 matches BIOS drive 0x81 May 4 00:12:50 oberon /bsd: root on wd0a May 4 00:12:50 oberon /bsd: rootdev=0x0 rrootdev=0x300 rawdev=0x302 May 4 00:12:50 oberon savecore: no core dump May 4 00:12:51 oberon routed[32060]: pppoe0 has a bad address May 4 00:12:51 oberon routed[32060]: static route --> 0.0.0.0 impossibly lacks ifp May 4 00:12:51 oberon ripd[27299]: WARNING: IP forwarding NOT enabled May 4 00:12:51 oberon ospfd[14178]: WARNING: IP forwarding NOT enabled, running as stub router May 4 00:12:51 oberon bgpd[9988]: setup_listeners setsockopt TTL: Invalid argument May 4 00:12:51 oberon bgpd[9988]: neighbor 10.2.1.1: session_connect bind: Can't assign requested address May 4 00:12:51 oberon bgpd[9988]: neighbor 10.0.2.0 (upstream2): session_connect bind: Can't assign requested address May 4 00:12:51 oberon bgpd[9988]: neighbor 10.2.0.2 (peering AS 65042): session_connect bind: Can't assign requested address May 4 00:12:51 oberon bgpd[9988]: neighbor 10.2.0.1 (peering AS 65042): session_connect bind: Can't assign requested address May 4 00:12:51 oberon bgpd[9988]: neighbor 10.1.0.3 (AS 65001 peer 2): session_connect bind: Can't assign requested address May 4 00:12:51 oberon bgpd[9988]: neighbor 10.1.0.2 (AS 65001 peer 1): connect: Can't assign requested address May 4 00:12:52 oberon inetd[13749]: telnet1/tcp: unknown service May 4 00:12:53 oberon postfix/postfix-script: warning: /var/spool/postfix/etc/services and /etc/services differ May 4 00:12:53 oberon bgpd[29013]: change req for ff02:5::/32: not in table May 4 00:12:53 oberon /bsd: pppoe: alien host unique tag, no session found May 4 00:12:53 oberon /bsd: pppoe: received PADO but could not find request for it -- Here my ticker tape .signature #### My name is Peter Philipp #### lynx -dump "http://en.wikipedia.org/w/index.php?title=Pufferfish&oldid=20768394" | sed -n 131,137p #### http://centroid.eu #### So long and thanks for all the fish!!!