Hi, Luca Corti schrieb: > No. I've just reextracted it just to be sure, but I still get the same > error. I got a sparc64 (Sun Ultra 5) running here which I upgraded from 4.0-stable to 4.1-stable. Just recompiled the kernel without any problems.
Michael OpenBSD 4.1-stable (GENERIC) #1: Mon May 7 14:19:21 CEST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC total memory = 268435456 avail memory = 234446848 using 1638 buffers containing 13418496 bytes of memory bootpath: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0/[EMAIL PROTECTED],0 mainbus0 (root): Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 400MHz) cpu0 at mainbus0: SUNW,UltraSPARC-IIi (rev 9.1) @ 400 MHz, version 0 FPU cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l) psycho0 at mainbus0 addr 0xfffc4000: SUNW,sabre, impl 0, version 0, ign 7c0 psycho0: bus range 0-2, PCI bus 0 psycho0: dvma map c0000000-dfffffff, iotdb 11364000-113e4000 pci0 at psycho0 ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13 pci1 at ppb0 bus 1 ebus0 at pci1 dev 1 function 0 "Sun PCIO EBus2" rev 0x01 auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003 power0 at ebus0 addr 724000-724003 ipl 37 "SUNW,pll" at ebus0 addr 504000-504002 not configured sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2 sabtty0 at sab0 port 0 sabtty1 at sab0 port 1 comkbd0 at ebus0 addr 3083f8-3083ff ipl 41: layout 37 wskbd0 at comkbd0: console keyboard com0 at ebus0 addr 3062f8-3062ff ipl 42: mouse: ns16550a, 16 byte fifo lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 34: polled "fdthree" at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39 not configured clock1 at ebus0 addr 0-1fff: mk48t59 "flashprom" at ebus0 addr 0-fffff not configured audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ipl 35 ipl 36: nvaddrs 0 audio0 at audioce0 hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address 08:00:20:f9:10:f6 nsphy0 at hme0 phy 1: DP83840 10/100 PHY, rev. 1 vgafb0 at pci1 dev 2 function 0 "ATI Mach64 GP" rev 0x5c wsdisplay0 at vgafb0: console (std, sun emulation), using wskbd0 pciide0 at pci1 dev 3 function 0 "CMD Technology PCI0646" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using ivec 0x7e0 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <ST320420A> wd0: 16-sector PIO, LBA, 19458MB, 39851760 sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRD-8483B, 1.00> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13 pci2 at ppb1 bus 2 pcons at mainbus0 not configured No counter-timer -- using %tick at 400MHz as system clock. root on wd0a rootdev=0xc00 rrootdev=0x1a00 rawdev=0x1a02