Greetings All.
I will start with my dmesg: See below------->
I have tried many ways to get the 300mw Z-COM WLAN PC Card, RP-MMCX,
802.11b Higher Power card to work with the system. I am trying to
setup the first Wlan (wi0) as an access point and the second (wi1) as
a bridge/link to a distant server that will also have the same setup
but on the second (wi1) card it will be channel 11.
Also below you will find the configuration files for wi0 and wi1. In
addition I will be using dchpd on each of the wi(0) cards but for
now am only using it on wi0. I am trying to get these to work before
turning to the second box,
*DMESG:*
OpenBSD 4.0 (GENERIC) #0: Sat Apr 28 21:23:45 PDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class)
2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 1073246208 (1048092K)
avail mem = 971010048 (948252K)
using 4256 buffers containing 53764096 bytes (52504K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(c7) BIOS, date 12/17/03, BIOS32 rev. 0 @
0xfb0b0, SMBIOS rev. 2.2 @ 0xf0800 (37 entries)
bios0: TYAN Computer S2099
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde90/240 (13 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev
0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x8000! 0xd0000/0x1000
0xd1000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x11
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x11
pci1 at ppb0 bus 1
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: irq 10
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x82
pci2 at ppb1 bus 2
vga1 at pci2 dev 1 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci2 dev 4 function 0 "ENE CB-1410 CardBus" rev 0x01: irq 11
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x82, i82562:
irq 11, address 00:e0:81:65:f2:bd
inphy0 at fxp0 phy 1: i82562EM 10/100 PHY, rev. 0
cbb1 at pci2 dev 9 function 0 "ENE CB-1410 CardBus" rev 0x01: irq 9
em0 at pci2 dev 10 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02:
irq 10, address 00:e0:81:65:f2:bc
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD1600BB-22RDA0>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, CD-ROM CDU5225, NYS4> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x02: irq 11
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 secbiomask ef65
netmask ef65 ttymask ffe7
pctr: user-level cycle counter enabled
wi0 at pcmcia0 function 0 " , IEEE 802.11 Wireless LAN/PC Card, "
port 0xe000/64
wi0: PRISM2.5 ISL3873 (0x800c), Firmware 1.1.1 (primary), 1.4.9
(station), address 00:60:b3:2d:99:78
wi1 at pcmcia1 function 0 " , IEEE 802.11 Wireless LAN/PC Card, "
port 0xe080/64
wi1: PRISM2.5 ISL3873 (0x800c), Firmware 1.1.1 (primary), 1.4.9
(station), address 00:60:b3:2d:99:7e
umass0 at uhub3 port 3 configuration 1 interface 0
umass0: TOSHIBA TransMemory, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <TOSHIBA, TransMemory, 5.00> SCSI0
0/direct removable
sd0: 983MB, 983 cyl, 64 head, 32 sec, 512 bytes/sec, 2013184 sec total
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: sd0 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ERRORS*
*hostname.wi0
*inet 192.168.1.1 255.255.255.0 NONE media DS11 mediaopt hostap nwid
my_net_1 chan 1
*hostname.wi1
*inet 192.168.2.1 255.255.255.0 NONE media DS11 mediaopt hostap nwid
my_net_2 chan 6*
dhcpd.interfaces
*# $OpenBSD: dhcpd.interfaces,v 1.1 1998/08/19 04:25:45 form Exp $
#
# List of network interfaces served by dhcpd(8).
#
# ep0
# ed0 le0
# de1
wi1*
dhcpd.conf
*# $OpenBSD: dhcpd.conf,v 1.1 1998/08/19 04:25:45 form Exp $
#
# DHCP server options.
# See dhcpd.conf(5) and dhcpd(8) for more information.
#
# Network: 192.168.1.0/255.255.255.0
# Domain name: my.domain
# Name servers: 192.168.1.3 and 192.168.1.5
# Default router: 192.168.1.1
# Addresses: 192.168.1.32 - 192.168.1.127
#
shared-network LOCAL-NET {
option domain-name "my_net";
option domain-name-servers 192.168.0.1, 192.168.1.1;
subnet 192.168.1.0 netmask 255.255.255.0 {
option routers 192.168.1.1;
range 192.168.1.2 192.168.1.254;
default-lease-time 2592000;
max-lease-time 31536000;
}
subnet 192.168.2.0 netmask 255.255.255.0 {
option routers 192.168.2.1;
range 192.168.2.2 192.168.2.254;
default-lease-time 2592000;
max-lease-time 31536000;
}
}
*
ifconfig -a
*o0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33224
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:e0:81:65:f2:bd
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 192.168.254.1 netmask 0xffffff00 broadcast 192.168.254.255
inet6 fe80::2e0:81ff:fe65:f2bd%fxp0 prefixlen 64 scopeid 0x1
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:e0:81:65:f2:bc
media: Ethernet autoselect (1000baseT full-duplex)
status: active
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::2e0:81ff:fe65:f2bc%em0 prefixlen 64 scopeid 0x2
pflog0: flags=0<> mtu 33224
pfsync0: flags=0<> mtu 1460
groups: carp
enc0: flags=0<> mtu 1536
wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:60:b3:2d:99:78
media: IEEE802.11 DS11 hostap
status: active
ieee80211: nwid my_net_1 chan 1 bssid 00:60:b3:2d:99:78 11dBm (auto)
inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::260:b3ff:fe2d:9978%wi0 prefixlen 64 scopeid 0x7
wi1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:60:b3:2d:99:7e
media: IEEE802.11 DS11 hostap
status: active
ieee80211: nwid my_net_2 chan 6 bssid 00:60:b3:2d:99:7e 9dBm (auto)
inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
inet6 fe80::260:b3ff:fe2d:997e%wi1 prefixlen 64 scopeid 0x8
