Hi,
I found this in my dmesg this morning after rebooting a server that
paniced. (Sorry, no chance to get a trace or ps--I'm still working on
getting a serial connection to another box working.)
scsibus1 at ami0: 16 targets
safte0 at scsibus1 targ 6 lun 0: <SUPER, GEM318, 0> SCSI2 3/processor fixed
scsibus2 at ami0: 16 targets
safte1 at scsibus2 targ 6 lun 0: <\\240 PER, GEM318, 0> SCSI2
3/processor fixed
Over the weekend I had to rebuild the RAID 1 set that lives in the
safte1 enclosure when it went down hard. The first reboot after the
panic the safte1 enclosure wasn't even in the dmesg. That RAID came up
fine although bioctl -v sd2 showed noencl instead of safte1.
Second reboot found the safte1 enclosure but with the garbled dmesg line.
Does this mean the enclosure itself might be flakey? Full dmesg below,
and thanks!
Jeff
OpenBSD 4.1-current (GENERIC.MP) #21: Mon Apr 23 01:30:33 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 2146988032 (2096668K)
avail mem = 1950175232 (1904468K)
using 4278 buffers containing 107474944 bytes (104956K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 02/09/05, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.3 @ 0xf82a0 (48 entries)
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2ff0/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801CA LPC" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800 0xc9800/0x2200
acpi at mainbus0 not configured
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133 MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type ISA
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 9 pa 0xfec80000, version 20, 24 pins
ioapic2 at mainbus0: apid 10 pa 0xfec80400, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7501 MCH Host" rev 0x01
ppb0 at pci0 dev 2 function 0 "Intel E7500 MCH" rev 0x01
pci1 at ppb0 bus 2
"Intel 82870P2 IOxAPIC" rev 0x04 at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0 "Intel 82870P2 PCIX-PCIX" rev 0x04
pci2 at ppb1 bus 5
"Intel 82870P2 IOxAPIC" rev 0x04 at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0 "Intel 82870P2 PCIX-PCIX" rev 0x04
pci3 at ppb2 bus 3
ppb3 at pci3 dev 3 function 0 "IBM 133 PCIX-PCIX" rev 0x03
pci4 at ppb3 bus 4
ami0 at pci4 dev 0 function 0 "Symbios Logic MegaRAID 320" rev 0x02:
apic 9 int 0 (irq 10)
ami0: LSI 532, 32b, FW 414C, BIOS vH429, 128MB RAM
ami0: 2 channels, 0 FC loops, 3 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 69618MB, 8875 cyl, 255 head, 63 sec, 512 bytes/sec, 142577664 sec total
sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct fixed
sd1: 69618MB, 8875 cyl, 255 head, 63 sec, 512 bytes/sec, 142577664 sec total
sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct fixed
sd2: 69618MB, 8875 cyl, 255 head, 63 sec, 512 bytes/sec, 142577664 sec total
scsibus1 at ami0: 16 targets
safte0 at scsibus1 targ 6 lun 0: <SUPER, GEM318, 0> SCSI2 3/processor fixed
scsibus2 at ami0: 16 targets
safte1 at scsibus2 targ 6 lun 0: <\\240 PER, GEM318, 0> SCSI2
3/processor fixed
ahc0 at pci3 dev 6 function 0 "Adaptec AHA-29160 U160" rev 0x02: apic 9
int 4 (irq 10)
scsibus3 at ahc0: 16 targets
st0 at scsibus3 targ 6 lun 0: <SEAGATE, DAT 9SP40-000, 910B> SCSI3
1/sequential removable
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: apic 8
int 16 (irq 10)
ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x42
pci5 at ppb4 bus 1
fxp0 at pci5 dev 1 function 0 "Intel 8255x" rev 0x10, i82551: apic 8 int
17 (irq 5), address 00:e0:81:26:a9:e4
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci5 dev 2 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
skc0 at pci5 dev 4 function 0 "D-Link Systems DGE-530T A1" rev 0x11,
Yukon (0x1): apic 8 int 19 (irq 9)
sk0 at skc0 port A, address 00:13:46:72:3b:1d
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CA LPC" rev 0x02: 24-bit
timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801CA IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus4 at atapiscsi0: 2 targets
cd0 at scsibus4 targ 0 lun 0: <SONY, DVD RW DW-U18A, UYS4> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02:
apic 8 int 17 (irq 0)
iic0 at ichiic0
lm1 at iic0 addr 0x29: W83782D
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pctr: user-level cycle counter enabled
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: sd1 matches BIOS drive 0x81
dkcsum: sd2 matches BIOS drive 0x82
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
