Hi all, CardBus adapter, Corega CG-WLCB54GS, on i386 #176:
ath0 at cardbus1 dev 0 function 0: irq 9 ar5k_ar5212_nic_wakeup: failed to resume the AR5212 (again) ath0: unable to attach hardware; HAL status 22 http://www.openbsd.org/plus41.html says "Disable 802.11g mode on AR5211 and 5212 based devices for now." but still - please let me know if more info would be helpful. OpenBSD 4.1-current (GENERIC) #176: Wed May 23 11:56:37 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium III ("GenuineIntel" 686-class) 598 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX ,FXSR,SSE real mem = 133722112 (130588K) avail mem = 114249728 (111572K) using 1663 buffers containing 6811648 bytes (6652K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+ BIOS, date 07/18/00, BIOS32 rev. 0 @ 0xfd8a6, SMBIOS rev. 2.3 @ 0xea8b0 (29 entries) bios0: FUJITSU FMV7NA2BC2 apm0 at bios0: Power Management spec V1.2 apm0: battery life expectancy 96% apm0: AC on, battery charge high, charging, estimated 3:12 hours apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xfd890/0x770 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf50/144 (7 entries) pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #9 is the last bus bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 acpi at mainbus0 not configured cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Mobility 1" rev 0x64 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) cbb0 at pci0 dev 4 function 0 "TI PCI1225 CardBus" rev 0x01: irq 9 cbb1 at pci0 dev 4 function 1 "TI PCI1225 CardBus" rev 0x01: irq 9 piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02 pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wi red to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <FUJITSU MHM2200AT> wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 5 piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x03: SMI iic0 at piixpm0 maestro0 at pci0 dev 8 function 0 "ESS Maestro 2E" rev 0x10: irq 5 ac97: codec id 0x83847609 (SigmaTel STAC9721/23) ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D audio0 at maestro0 fxp0 at pci0 dev 16 function 0 "Intel 8255x" rev 0x08, i82559: irq 5, address 00 :00:0e:cc:29:b2 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 8 device 0 cacheline 0x8, lattimer 0x20 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 9 device 0 cacheline 0x8, lattimer 0x20 pcmcia1 at cardslot1 isa0 at piixpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered biomask efed netmask efed ttymask ffef pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matches BIOS drive 0x80 root on wd0a swap on wd0b dump on wd0b ath0 at cardbus1 dev 0 function 0: irq 9 ar5k_ar5212_nic_wakeup: failed to resume the AR5212 (again) ath0: unable to attach hardware; HAL status 22 ath0 detached
