I guess I've "jumped the gun" on this one as the issue has resurfaced after a week and a half.
FWIW, when the issue occurs, the drivers "goes" OACTIVE. The following is the output of ifconfig when the issue occurred and then after the issue was "resolved." $ ifconfig ral0 ral0: flags=8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST> mtu 1500 lladdr 00:14:a5:33:31:c7 groups: wlan media: IEEE802.11 autoselect mode 11g hostap status: active ieee80211: nwid meth chan 1 bssid 00:14:a5:33:31:c7 nwkey <not displayed> 100dBm inet 192.168.255.254 netmask 0xffffffe0 broadcast 192.168.255.255 inet6 fe80::214:a5ff:fe33:31c7%ral0 prefixlen 64 scopeid 0x7 $ ifconfig ral0 ral0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 lladdr 00:14:a5:33:31:c7 groups: wlan media: IEEE802.11 autoselect mode 11g hostap status: active ieee80211: nwid meth chan 1 bssid 00:14:a5:33:31:c7 nwkey <not displayed> 100dBm inet 192.168.255.254 netmask 0xffffffe0 broadcast 192.168.255.255 inet6 fe80::214:a5ff:fe33:31c7%ral0 prefixlen 64 scopeid 0x7 Any thoughts... or anyone know of a 802.11g card/driver combination with that legendary wi reliability? On 5/25/07, Daniel Melameth <[EMAIL PROTECTED]> wrote:
I have since replaced the 2560 card with a 2661 and it has been running fairly well for a week. Whether this is an issue with the 2500 card or the driver though, I'm not certain. Cheers. $ dmesg | grep ral0 ral0 at cardbus1 dev 0 function 0: irq 10, address 00:14:a5:33:31:c7 ral0: MAC/BBP RT2661B, RF RT2529 (MIMO XR) On 5/6/07, Daniel Melameth <[EMAIL PROTECTED]> wrote: > I just setup a ral-based AP doing 802.11g and WEP and it stops working once > a day-all wireless clients cease being able to pass packets through the AP > and an ifconfig ral0 down and ifconfig ral0 up is required to temporarily > address the issue. Any thoughts on how to fix? > > Thanks. > > > > $ cat /etc/hostname.ral0 > inet 192.168.255.254 255.255.255.224 NONE \ > chan 1 media autoselect mediaopt hostap mode 11g \ > nwid meth nwkey <omitted> > > $ dmesg > OpenBSD 4.1-stable (GENERIC) #0: Fri May 4 19:21:34 MDT 2007 > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel(R) Pentium(R) M processor 1600MHz ("GenuineIntel" 686-class) > 1.60 GHz > cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX, > FXSR,SSE,SSE2,TM,SBF,EST,TM2 > real mem = 536244224 (523676K) > avail mem = 481591296 (470304K) > using 4278 buffers containing 26935296 bytes (26304K) of memory > mainbus0 (root) > bios0 at mainbus0: AT/286+ BIOS, date 06/23/05, BIOS32 rev. 0 @ 0xf0000, > SMBIOS rev. 2.3 @ 0xfa1ee (31 entries) > bios0: Hewlett-Packard HP Compaq nc6000 (DQ880A#ABA) > apm0 at bios0: Power Management spec V1.2 (BIOS managing devices) > apm0: AC on, battery charge unknown > apm0: flags 130102 dobusy 0 doidle 1 > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0840/160 (8 entries) > pcibios0: bad IRQ table checksum > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf6360/160 (8 entries) > pcibios0: PCI Exclusive IRQs: 5 10 11 > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DBM LPC" rev 0x00) > pcibios0: PCI bus #5 is the last bus > bios0: ROM list: 0xc0000/0x10000 > acpi at mainbus0 not configured > cpu0 at mainbus0 > cpu0: Enhanced SpeedStep 1600 MHz (1484 mV): speeds: 1600, 1400, 1200, 1000, > 800, 600 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev 0x03 > ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev 0x03 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M10 NP" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10 > usb0 at uhci0: USB revision 1.0 > uhub0 at usb0 > uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 10 > usb1 at uhci1: USB revision 1.0 > uhub1 at usb1 > uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x03: irq 10 > usb2 at uhci2: USB revision 1.0 > uhub2 at usb2 > uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 10 > usb3 at ehci0: USB revision 2.0 > uhub3 at usb3 > uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1 > uhub3: 6 ports with 6 removable, self powered > ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83 > pci2 at ppb1 bus 2 > ath0 at pci2 dev 4 function 0 "Atheros AR5212" rev 0x01: irq 11 > ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, WOR0W, address > 00:0b:cd:5a:28:bb > cbb0 at pci2 dev 6 function 0 "O2 Micro OZ711E0 CardBus" rev 0x00: irq 10 > cbb1 at pci2 dev 6 function 1 "O2 Micro OZ711E0 CardBus" rev 0x00: irq 10 > "O2 Micro OZ711Mx CardBus" rev 0x00 at pci2 dev 6 function 2 not configured > cbb2 at pci2 dev 6 function 3 "O2 Micro OZ711E0 CardBus" rev 0x00: irq 10 > bge0 at pci2 dev 14 function 0 "Broadcom BCM5705M Alt" rev 0x03, BCM5705 A3 > (0x3003): irq 11, address 00:08:02:de:d3:2d > brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2 > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20 > pcmcia0 at cardslot0 > cardslot1 at cbb1 slot 1 flags 0 > cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0, lattimer 0x20 > pcmcia1 at cardslot1 > cardslot2 at cbb2 slot 2 flags 0 > cardbus2 at cardslot2: bus 5 device 0 cacheline 0x0, lattimer 0x20 > pcmcia2 at cardslot2 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03 > pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, > channel 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide0 channel 0 drive 0: <FUJITSU MHT2060AH> > wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4241N, 0C29> SCSI0 > 5/cdrom removable > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 > auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 11, ICH4 > AC97 > ac97: codec id 0x41445374 (Analog Devices AD1981B) > ac97: codec features headphone, 20 bit DAC, No 3D Stereo > audio0 at auich0 > "Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured > isa0 at ichpcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > biomask e76d netmask ef6d ttymask ffef > pctr: 686-class user-level performance counters enabled > mtrr: Pentium Pro MTRR support > fxp0 at cardbus0 dev 0 function 0 "INTEL(R), PRO/100 CARDBUS II, MBLA3300": > INTEL(R) PRO/100 CARDBUS II: irq 10, address 00:03:47:18:1f:5d > inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 > ral0 at cardbus1 dev 0 function 0 "Ralink Technology, Inc., RT2500, 802.11 > CardBus Reference Card": irq 10, address 00:0e:3b:07:a2:13 > ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525 > ugen0 at uhub2 port 1 > ugen0: ACTIONTEC Bluetooth by hp, rev 1.10/8.02, addr 2 > dkcsum: wd0 matches BIOS drive 0x80 > root on wd0a > rootdev=0x0 rrootdev=0x300 rawdev=0x302