I am having Trouble with a *Areca* 1200 series RAID card,
When I try and boot OpenBSD -current with the *Areca* raid card in the system
it hangs with error message:
***
root on wd0a swap on wd0b dump on wd0b
Unable to query firmware for sensor info
***
however without the raid card I get the following dmesg
OpenBSD 4.1-current (GENERIC.MP) #124: Tue Jun 5 21:39:19 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class)
2.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
real mem = 1064857600 (1015MB)
avail mem = 1018224640 (971MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/29/06, BIOS32 rev. 0 @
0xfa020, SMBIOS rev. 2.4 @ 0xf0000 (39 entries)
bios0: Biostar 945GZ Micro 775 SE
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xc964
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc810/288 (16 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 19 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 7 10 11 12 15
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xaa00!
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class, 0KB
L2 cache) 2.81 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type ISA
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GP" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02: aperture
at 0xfdf00000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci_intr_map: bus 0 dev 28 func 0 pin 2; line 12
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 28 func 0 pin 3; line 11
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 28 func 0 pin 4; line 15
pci_intr_map: no MP mapping found
pci1 at ppb0 bus 1
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 4
int 23 (irq 7)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 4
int 23 (irq 7)
usb0 at ehci0: USB revision
2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci_intr_map: bus 0 dev 30 func 0 pin 1; line 12
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 30 func 0 pin 2; line 10
pci_intr_map: no MP mapping found
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 "DEC 21152 PCI-PCI" rev 0x03
pci_intr_map: bus 2 dev 1 func 0 pin 2; line 11
pci_intr_map: no MP mapping found
pci_intr_map: bus 2 dev 1 func 0 pin 3; line 15
pci_intr_map: no MP mapping found
pci3 at ppb2 bus 3
dc0 at pci3 dev 4 function 0 "DEC 21142/3" rev 0x30: apic 4 int 18
(irq 11), address 00:c0:95:e1:03:28
dcphy0 at dc0 phy 31: internal PHY
dc1 at pci3 dev 5 function 0 "DEC 21142/3" rev 0x30: apic 4 int 18
(irq 11), address 00:c0:95:e1:03:29
dcphy1 at dc1 phy 31: internal PHY
dc2 at pci3 dev 6 function 0 "DEC 21142/3" rev 0x30: apic 4 int 18
(irq 11), address 00:c0:95:e1:03:2a
dcphy2 at dc2 phy 31: internal PHY
dc3 at pci3 dev 7 function 0 "DEC 21142/3" rev 0x30: apic 4 int 18
(irq 11), address 00:c0:95:e1:03:2b
dcphy3 at dc3 phy 31: internal PHY
ppb3 at pci2 dev 2 function 0 "DEC 21152 PCI-PCI" rev 0x03
pci_intr_map: bus 2 dev 2 func 0 pin 1; line 5
pci_intr_map: no MP mapping found
pci_intr_map: bus 2 dev 2 func 0 pin 2; line 12
pci_intr_map: no MP mapping found
pci4 at ppb3 bus 4
dc4 at pci4 dev 4 function 0 "DEC 21142/3" rev 0x41: apic 4 int 17
(irq 12), address 00:c0:95:e2:4f:04
dcphy4 at dc4 phy 31: internal PHY
dc5 at pci4 dev 5 function 0 "DEC 21142/3" rev 0x41: apic 4 int 17
(irq 12), address 00:c0:95:e2:4f:05
dcphy5 at dc5 phy 31: internal PHY
dc6 at pci4 dev 6 function 0 "DEC 21142/3" rev 0x41: apic 4 int 17
(irq 12), address 00:c0:95:e2:4f:06
dcphy6 at dc6 phy 31: internal PHY
dc7 at pci4 dev 7 function 0 "DEC 21142/3" rev 0x41: apic 4 int 17
(irq 12), address 00:c0:95:e2:4f:07
dcphy7 at dc7 phy 31: internal PHY
rl0 at pci2 dev 5 function 0 "Realtek 8139" rev 0x10: apic 4 int 20
(irq 10), address 00:e0:4d:14:d6:22
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, CD-ROM CDU5225, NYS4> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 4 int 19 (irq 15) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD1600JS-00NCB1>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic
4 int 19 (irq 15)
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
apm0: disconnected
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
The raid set was created fresh using 3 320gb sata2 hard drives
configured for RAID5
if I disconnect 1 of the drives sata cables from any drive, the Raid
alarm sounds
but it will boot.
I still do get the Unable to query firmware for sensor info
but bioctl arc0 spits out Device Busy
however when I boot linux I can see the raid set just fine.
if anyone can help, or have any suggestions I would greatly appreciate it.
Sam Fourman Jr.
