Hi All,
Regarding the issue I mentioned below, it is because I am using
the Intel Motherboard. I have read some email before regarding
the same problem, in those email, need to change the
vparam.h (something) and to build the stable.
I was able to run the OpenBSD 4.1 with the hardware now.
Sorry for the noise.
Best regards,
Riwan
At 03:21 PM 6/9/2007 +0700, riwanlky wrote:
HI All,
I am having problem with network card on Intel Motherboard on OpenBSD 4.1.
However the same motherboard and network card do not have problem wiht
OpenBSD 4.0
When loading the card:
em0 at pci3 dev 0 function 0 "Intel PRO/1000MT (82573e)" rev
0x03uvm_fault(0xd0691180,
0x1f000, 0, 1) ->
fatal page fault (6) in supervisor mode
trap type 6 code 0 eip d02b0a10 cs 8 eflags 10202 cr2 1ff07 cp0
panic: trap type 6, code-0, pc-d02b0a10
the operating system has halted
please press any key to reboot
On OpenBSD 4.0 the dmesg:
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 3
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CNXT-ID,C
X16
cpu0: EST: strange msr value 0x00000f2700000f27
real mem = 533651456 (521144K)
avail mem = 478867456 (467644K)
using 4256 buffers containing 26783744 bytes (26156K) of memory
RTC BIOS diagnostic error 3
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 07/11/06, SMBIOS rev. 2.4 @
0x1fe0e000
(42 entries)
bios0: Intel Corporation S3000AH
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci3 at ppb2 bus 3
em0 at pci3 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: irq 9,
addres
s 00:15:17:13:c7:36
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 10
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci4 at ppb3 bus 4
vga1 at pci4 dev 4 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em1 at pci4 dev 5 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq 9,
addre
ss 00:15:17:13:c7:37
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 c
onfigured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST320413A>
wd0: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 11
iic0 at ichiic0
adt0 at iic0 addr 0x2e: sch5017 rev 0x8a
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask eded netmask efed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
thanks and best regards,
riwan
