On 6/21/07, Edd Barrett <[EMAIL PROTECTED]> wrote:
Hi,
On 21/06/07, Rivanor P. Soares <[EMAIL PROTECTED]> wrote:
> Stop in /usr/src/sys/arch/i386/compile/GENERIC (line 894 of Makefile).
Is it an i386 machine? Daft question I know, but I've tryed build i386
kernels acidentally many times on my sparc64's.
Make a habbit of sending a dmesg.
--
Best Regards
Edd
---------------------------------------------------
http://students.dec.bournemouth.ac.uk/ebarrett
Yes, it is an i386 machine. dmesg below:
OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 1.11 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
real mem = 125333504 (122396K)
avail mem = 106827776 (104324K)
using 1560 buffers containing 6389760 bytes (6240K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 11/13/01, BIOS32 rev. 0 @
0xfb110, SMBIOS rev. 2.2 @ 0xf0800 (37 entries)
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb5b8
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde60/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 5 11 12
pcibios0: PCI Interrupt Router at 000:01:0 ("SiS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xfc00 0xd0000/0x8000
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SiS 630 PCI" rev 0x30
pciide0 at pci0 dev 0 function 1 "SiS 5513 EIDE" rev 0xd0: 630S: DMA,
channel 0 wired to compatibility, channel 1 wired to co
mpatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD200EB-00CSF0>
wd0: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd1 at pciide0 channel 0 drive 1: <ST320410A>
wd1: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4521B, 1.00> SCSI0
5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
pcib0 at pci0 dev 1 function 0 "SiS 85C503 System" rev 0x00
sis0 at pci0 dev 1 function 1 "SiS 900 10/100BaseTX" rev 0x84: irq 12,
address 00:07:95:ec:18:c3
ukphy0 at sis0 phy 0: Generic IEEE 802.3u media interface, rev. 0: OUI
0x000760, model 0x0000
ohci0 at pci0 dev 1 function 2 "SiS 5597/5598 USB" rev 0x07: irq 11,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SiS OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 1 function 3 "SiS 5597/5598 USB" rev 0x07: irq 11,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: SiS OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
autri0 at pci0 dev 1 function 4 "SiS 7018 Audio" rev 0x02: irq 5
ac97: codec id 0x434d4941 (C-Media Electronics CMI9738)
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
ppb0 at pci0 dev 2 function 0 "SiS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
"SiS 6300" rev 0x21 at pci1 dev 0 function 0 not configured
puc0 at pci0 dev 9 function 0 "US Robotics 3CP5610" rev 0x01: com
pccom3 at puc0 port 0 irq 5: ns16550a, 16 byte fifo
vga1 at pci0 dev 11 function 0 "NVIDIA GeForce4 MX 440" rev 0xa3
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ste0 at pci0 dev 13 function 0 "Sundance ST201" rev 0x31: irq 11,
address 00:08:54:dc:9d:ae
ukphy1 at ste0 phy 0: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0090c3, model 0x0018
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef4d netmask ff4d ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Alcor Micro product 0x3002, rev 1.10/1.00, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1
uhidev1: Alcor Micro product 0x3002, rev 1.10/1.00, addr 2, iclass 3/0
uhidev1: 4 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhid2 at uhidev1 reportid 4: input=1, output=0, feature=0
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
--
Rivanor
