Reyk Floeter wrote:
On Tue, Jul 03, 2007 at 03:57:20PM +0200, Fredrik Carlsson wrote:
Hi again,
My setup looks like this:
[em0, em1]-trunk0 <- vlan2 <- carp2....
[em2, em3]-trunk1 <- vlan104 <- carp104....
If don't use carp at all everything works fine, but when i add carp to
trunk0 and trunk1 it takes a few seconds and the box hangs and a poweroff
reboot is needed.
can you show the command sequence you are using?
what openbsd release are you using, can you send a dmesg?
please try to get some more details, try to find a way to reproduce it.
use the list [EMAIL PROTECTED] for bug reports or open a pr with
sendbug(1) (see the manpage for details).
If only one carp device exists the machine works but as soon as i add two
it hangs.
Even if I made some config error the machine should not hang.
trunk0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:0e:0c:db:3f:48
trunk: trunkproto failover
trunkport em1 active
trunkport em0 master,active
groups: trunk
media: Ethernet autoselect
status: active
inet6 fe80::20e:cff:fedb:3f48%trunk0 prefixlen 64 scopeid 0xa
trunk1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:0e:0c:db:3f:4a
trunk: trunkproto failover
trunkport em3 active
trunkport em2 master,active
groups: trunk
media: Ethernet autoselect
status: active
inet6 fe80::20e:cff:fedb:3f4a%trunk1 prefixlen 64 scopeid 0xb
vlan1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:0e:0c:db:3f:48
vlan: 1 priority: 0 parent interface: trunk0
groups: vlan
inet6 fe80::20e:cff:fedb:3f48%vlan1 prefixlen 64 scopeid 0xc
vlan2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:0e:0c:db:3f:4a
vlan: 2 priority: 0 parent interface: trunk1
groups: vlan
inet6 fe80::20e:cff:fedb:3f4a%vlan2 prefixlen 64 scopeid 0xe
carp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:00:5e:00:01:01
carp: MASTER carpdev vlan1 vhid 1 advbase 1 advskew 0
groups: carp
inet6 fe80::200:5eff:fe00:101%carp1 prefixlen 64 scopeid 0x16
inet 10.10.1.17 netmask 0xfffffff0 broadcast 10.10.1.31
carp2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:00:5e:00:01:01
carp: MASTER carpdev vlan2 vhid 1 advbase 1 advskew 0
groups: carp
inet6 fe80::200:5eff:fe00:101%carp2 prefixlen 64 scopeid 0x17
inet 10.10.1.33 netmask 0xfffffff0 broadcast 10.10.1.47
// Fredrik
I was not able to use sendbug, but i copied the information and sent it
to [EMAIL PROTECTED]
Any ideas what could cause my problem?
// Fredrik