Hello, I am trying to install gnokii package. It looks that it has difficulties finding dependencies. I have xbase installed. Any ideas?
# pkg_add ftp://spargel.kd85.com/pub/OpenBSD/4.1/packages/i386/gnokii-0.6.14p1-no_x11.tgz Can't install ftp://spargel.kd85.com/pub/OpenBSD/4.1/packages/i386/gnokii-0.6.14p1-no_x11.tgz: lib not found iconv.4.0 Even by looking in the dependency tree: libusb-0.1.12 Maybe it's in a dependent package, but not tagged with @lib ? (check with pkg_info -K -L) If you are still running 3.6 packages, update them. Can't install ftp://spargel.kd85.com/pub/OpenBSD/4.1/packages/i386/gnokii-0.6.14p1-no_x11.tgz: lib not found intl.3.0 dmesg: ============================================================ OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD Sempron(tm) 2800+ ("AuthenticAMD" 686-class, 256KB L2 cache) 2 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 502689792 (490908K) avail mem = 450883584 (440316K) using 4278 buffers containing 25260032 bytes (24668K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+ BIOS, date 08/06/04, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.3 @ 0xf04b0 (46 entries) bios0: Ssystem manufacturer A7NVM400 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf41b0/208 (11 entries) pcibios0: no compatible PCI ICU found: ICU vendor 0x10de product 0x0060 pcibios0: Warning, unable to fix up PCI interrupt routing pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc0000/0xdc00 acpi at mainbus0 not configured cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "NVIDIA nForce2 PCI" rev 0xa2 "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 1 not configured "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 2 not configured "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 3 not configured "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 4 not configured "NVIDIA nForce2" rev 0xa2 at pci0 dev 0 function 5 not configured pcib0 at pci0 dev 1 function 0 "NVIDIA nForce2 ISA" rev 0xa4 nviic0 at pci0 dev 1 function 1 "NVIDIA nForce2 SMBus" rev 0xa2 iic0 at nviic0 iic1 at nviic0 ohci0 at pci0 dev 2 function 0 "NVIDIA nForce2 USB" rev 0xa4: irq 11, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1 at pci0 dev 2 function 1 "NVIDIA nForce2 USB" rev 0xa4: irq 11, version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ehci0 at pci0 dev 2 function 2 "NVIDIA nForce2 USB" rev 0xa4: irq 5 usb2 at ehci0: USB revision 2.0 uhub2 at usb2 uhub2: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered nfe0 at pci0 dev 4 function 0 "NVIDIA nForce2 LAN" rev 0xa1: irq 7, address 00:11:2f:87:9c:fe rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1 auich0 at pci0 dev 6 function 0 "NVIDIA nForce2 AC97" rev 0xa1: irq 10, nForce2 AC97 ac97: codec id 0x414c4720 (Avance Logic ALC650) ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D audio0 at auich0 ppb0 at pci0 dev 8 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3 pci1 at ppb0 bus 2 eap0 at pci1 dev 6 function 0 "Ensoniq CT5880" rev 0x02: irq 11 eap0: eap1371_read_codec timeout 2 ac97: codec id 0x83847609 (SigmaTel STAC9721/23) ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D audio1 at eap0 midi0 at eap0: <AudioPCI MIDI UART> xl0 at pci1 dev 7 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq 10, address 00:10:5a:af:f2:20 exphy0 at xl0 phy 24: 3Com internal media interface pciide0 at pci0 dev 9 function 0 "NVIDIA nForce2 IDE" rev 0xa2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <WDC WD2500JB-00FUA0> wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <CD-ROM, F565E, 1.07> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4 ppb1 at pci0 dev 30 function 0 "NVIDIA nForce2 AGP" rev 0xa2 pci2 at ppb1 bus 1 vga1 at pci2 dev 0 function 0 "NVIDIA GeForce4 MX nForce GPU" rev 0xa3 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi1 at pcppi0: <PC speaker> spkr0 at pcppi0 it2 at isa0 port 0xd00/8: IT87 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask eb65 netmask efe5 ttymask ffe7 pctr: user-level cycle counter enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 auich0: measured ac97 link rate at 48005 Hz, will use 48000 Hz
