Greetings,
My apologies if this is a repost. I am having trouble getting this
through to the list.
I am trying to install OpenBSD (i386) 4.1 and am failing to get it to
identify my standard parallel ide disk. The disk is identified at
bootstrapping as hd0*+, but once the installer gets to the point of "Proceed
with Install? [yes]" I receive the message "No Disks Found".
The hardware checks out via CheckIT, and the FreeBSD installer does not
have a problem partitioning and formatting the disk, so I do not believe this
is hardware failure. I know that OpenBSD probes hardware differently then
FreeBSD, so I think the root of my issue has to do with OpenBSD drive probing.
All standard pATA IDE controllers should be supported, according to the
hardware pages.
Would someone mind looking over the attached dmesg and giving me some
ideas of how to resolve this? I don't see anything that immediately stands out
as an error (except for the USB stuff, which I don't need on this box).
OpenBSD 4.1 (RAMDISK) #260: Sat Mar 10 19:38:22 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK
cpu0: Intel(R) Celeron(R) CPU 2.80GHz ("GenuineIntel" 686-class) 2.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CNXT-ID,CX16,xTPR
real mem = 1064595456 (1039644K)
avail mem = 967368704 (944696K)
using 4278 buffers containing 53354496 bytes (52104K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 03/21/07, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.3 @ 0xf04c0 (53 entries)
bios0: ASUSTeK Computer Inc. P5PE-VM
apm0 at bios0: Power Management spec V1.2
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf86a0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa000! 0xca000/0x1000 0xcb000/0x1000
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G/PE/P CPU-I/0-1" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82801EB/ER USB" rev 0x02 at pci0 dev 29 function 0 not configured
"Intel 82801EB/ER USB" rev 0x02 at pci0 dev 29 function 1 not configured
"Intel 82801EB/ER USB" rev 0x02 at pci0 dev 29 function 2 not configured
"Intel 82801EB/ER USB" rev 0x02 at pci0 dev 29 function 3 not configured
"Intel 82801EB/ER USB2" rev 0x02 at pci0 dev 29 function 7 not configured
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci1 at ppb0 bus 1
em0 at pci1 dev 9 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: irq 14,
address 00:0e:0c:c3:05:1e
em1 at pci1 dev 11 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: irq 3,
address 00:0e:0c:b9:60:53
skc0 at pci1 dev 13 function 0 "Marvell Yukon 88E8001/8003/8010" rev 0x13,
Yukon Lite (0x9): irq 5
sk0 at skc0 port A, address 00:1a:92:21:2e:8d
ukphy0 at sk0 phy 0: Generic IEEE 802.3u media interface, rev. 5: OUI 0x005043,
model 0x0002
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: no compatibility interrupt for use by channel 0
pciide0: channel 1 disabled (no drives)
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask bfc5 netmask ffed ttymask ffef
rd0: fixed, 3800 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
Thanks in advance for any advice.
Thanks,
John H. Nyhuis
IT Manager
Dept. of Pediatrics
HS RR541C, Box 356320
University of Washington
Desk: (206)-685-3884
[EMAIL PROTECTED]
