I tried a bsd.rd from 8-9-2007 and it still hangs in the same spot, no matter if I have acpi enabled or not. I also Have a Areca ARC-1210 raid card, if i remove it then bsd.rd works fine.
if I have a mp kernel as well as acpi enabled then it boots fine with the areca card installed. Sam Fourman Jr. On 7/19/07, David Gwynne <[EMAIL PROTECTED]> wrote: > > can you try a snapshot bsd.rd? > > On Thu, Jul 19, 2007 at 11:33:34PM +0100, Nick Humphrey wrote: > > David Gwynne wrote: > > > On Thu, Jul 19, 2007 at 12:29:51PM +0100, Nick Humphrey wrote: > > >> I am having trouble with installing OpenBSD 4.1 on a new amd64 server > > >> with an Areca ARC-1210 raid card. When I boot from the 4.1 CD install > > >> media, everything seems fine up until it reaches" rd0: fixed, xxxx > > >> blocks" and then the system hangs. I have downloaded the latest amd64 > > >> current snapshot from the mirrors and tried booting from that too - > same > > >> result. > > >> > > >> System: > > >> - Gigabyte GA-M61PM-S2 (rev. 1.0) (BIOS Updated to latest F7 release) > > >> - Areca ARC-1210 SATA RAID PCI-Express (firmware updated to V1.43 > > >> 2007-04-17) > > >> - 2 x 400GB SATA Disks > > >> > > >> I have setup RAID 1 mirror of the two disks in the RAID BIOS. (Areca > > >> card and drives detected by and usable in Linux and Windows XP). > Without > > >> the ARC-1210 card installed and the disks wired to the on-board SATA > > >> controller everything works fine (i.e. I am able to install OpenBSD). > I > > >> have tried disabling on-board LAN and on-board SATA in the BIOS. I > have > > >> also tried enabling ACPI at boot time with ( -c, UKC> enable acpi, > quit > > >> ) which produces same result. In addition I have tried booting with > the > > >> i386 release media, and experienced exactly the same problem. > > > > > > can you show me a dmesg from this box with acpi enabled? > > > > > > dlg > > > > > > > <snip> > > > > David, > > > > Please find below dmesg from 4.1-RELEASE with acpi enabled. > > > > Kind regards, > > > > Nick > > > > > > boot> -c > > booting cd0a:/4.1/amd64/bsd.rd: 2169728+438535+2270160+0+330160 > > [80+220056+135431]=0x94f9a0 > > entry point at 0x1001e0 [7205c766, 34000004, 24448b12, > > 2840a304]??Copyright (c) 1982, 1986, 1989, 1991, 1993 > > The Regents of the University of California. All rights > reserved. > > Copyright (c) 1995-2007 OpenBSD. All rights reserved. > > http://www.OpenBSD.org > > > > OpenBSD 4.1 (RAMDISK_CD) #1054: Sat Mar 10 19:32:06 MST 2007 > > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD > > real mem = 2079911936 (2031164K) > > avail mem = 1778188288 (1736512K) > > using 22937 buffers containing 208199680 bytes (203320K) of memory > > User Kernel Config > > UKC> enable acpi > > 136 acpi0 enabled > > UKC> quit > > Continuing... > > mainbus0 (root) > > acpi0 at mainbus0: rev 0 > > acpi0: tables DSDT FACP SSDT HPET MCFG APIC > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus 1 (HUB0) > > cpu0 at mainbus0: (uniprocessor) > > cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+, 2612.33 MHz > > cpu0: > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW > > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB > > 64b/line 16-way L2 cache > > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully > associative > > cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully > associative > > cpu0: PowerNow! K8 2612 MHz: speeds: 2600 2400 2200 2000 1800 1000 MHz > > pci0 at mainbus0 bus 0: configuration mode 1 > > "NVIDIA MCP61 Memory" rev 0xa1 at pci0 dev 0 function 0 not configured > > "NVIDIA MCP61 ISA" rev 0xa2 at pci0 dev 1 function 0 not configured > > "NVIDIA MCP61 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured > > "NVIDIA MCP61 Memory" rev 0xa2 at pci0 dev 1 function 2 not configured > > ohci0 at pci0 dev 2 function 0 "NVIDIA MCP61 USB" rev 0xa2: irq 10, > > version 1.0, legacy support > > usb0 at ohci0: USB revision 1.0 > > uhub0 at usb0 > > uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1 > > uhub0: 10 ports with 10 removable, self powered > > ehci0 at pci0 dev 2 function 1 "NVIDIA MPC61 USB" rev 0xa2: irq 11 > > usb1 at ehci0: USB revision 2.0 > > uhub1 at usb1 > > uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1 > > uhub1: 10 ports with 10 removable, self powered > > ppb0 at pci0 dev 4 function 0 "NVIDIA MCP61" rev 0xa1 > > pci1 at ppb0 bus 1 > > skc0 at pci1 dev 7 function 0 "D-Link Systems DGE-530T B1" rev 0x11, > > Yukon Lite (0x9): irq 10 > > sk0 at skc0 port A, address 00:15:e9:aa:d3:34 > > eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5 > > pciide0 at pci0 dev 6 function 0 "NVIDIA MCP61 IDE" rev 0xa2: DMA, > > channel 0 configured to compatibility, channel 1 configured to > compatibility > > atapiscsi0 at pciide0 channel 0 drive 0 > > scsibus0 at atapiscsi0: 2 targets > > cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-2510A, 2.16> SCSI0 > > 5/cdrom removable > > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > > pciide0: channel 1 ignored (disabled) > > ppb1 at pci0 dev 9 function 0 "NVIDIA MCP61 PCIE" rev 0xa2 > > pci2 at ppb1 bus 2 > > ppb2 at pci2 dev 0 function 0 "Intel IOP332 PCIE-PCIX" rev 0x07 > > pci3 at ppb2 bus 3 > > arc0 at pci3 dev 14 function 0 "Areca ARC-1210" rev 0x00: irq 11 > > arc0: 4 SATA Ports, 256MB SDRAM, FW Version: V1.43 2007-4-17 > > scsibus1 at arc0: 16 targets > > sd0 at scsibus1 targ 0 lun 0: <Areca, ARC-1210-VOL#00, R001> SCSI3 > > 0/direct fixed > > sd0: 381469MB, 58128 cyl, 28 head, 480 sec, 512 bytes/sec, 781249536 sec > > total > > ppb3 at pci2 dev 0 function 2 "Intel IOP332 PCIE-PCIX" rev 0x07 > > pci4 at ppb3 bus 4 > > vga1 at pci0 dev 13 function 0 "NVIDIA GeForce 6100 nForce 430" rev 0xa2 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 > > pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 > > pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 > > pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 > > isa0 at mainbus0 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > com0: console > > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > rd0: fixed, 3584 blocks > > > > -------------------------------------------------------------- > > > > End.
