I've got an older 3.7 machine that keeps panicing. I know 3.7 is old an out of support, this server will be upgraded in about 2 weeks, but needs to run until then.
The errors seem to alternate between :"pool_prime_page: vmmpepl: unaligned page" and:pool_get(mclpl): free list modified: magic=deaf3434; page 0xda241000; item addr 0xda241800 I've tried swapping RAM, any other ideas? dmesg follows: OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3.02 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI,MWAIT,CNXT-ID real mem = 2147000320 (2096680K) avail mem = 1953214464 (1907436K) using 4278 buffers containing 107454464 bytes (104936K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(c3) BIOS, date 01/31/05, BIOS32 rev. 0 @ 0xfb2e0 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdc84 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdbb0/192 (10 entries) pcibios0: PCI Exclusive IRQs: 3 4 5 7 9 10 11 pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00) pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc0000/0xf800 0xd0000/0x4000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82865G/PE/P CPU-I/0-1" rev 0x02 ppb0 at pci0 dev 1 function 0 "Intel 82865G/PE/P CPU-AGP" rev 0x02 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "Nvidia GeForce FX 5200" rev 0xa1 wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2 pci2 at ppb1 bus 2 xl0 at pci2 dev 0 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 10, address 00:04:75:c3:88:e6 exphy0 at xl0 phy 24: 3Com internal media interface pciide0 at pci2 dev 1 function 0 "CMD Technology AAR-1210SA" rev 0x02: DMA pciide0: using irq 5 for native-PCI interrupt pciide0: port 0: device present, speed: 1.5Gb/s wd0 at pciide0 channel 0 drive 0: <WDC WD2500SD-01KCC0> wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 6 pciide0: port 1: device present, speed: 1.5Gb/s wd1 at pciide0 channel 1 drive 0: <WDC WD2500SD-01KCC0> wd1: 16-sector PIO, LBA48, 238475MB, 488397168 sectors wd1(pciide0:1:0): using BIOS timings, Ultra-DMA mode 6 "VIA VT6306 FireWire" rev 0x46 at pci2 dev 2 function 0 not configured ahc1 at pci2 dev 3 function 0 "Adaptec AHA-3960D U160" rev 0x01: irq 11 scsibus0 at ahc1: 16 targets st0 at scsibus0 targ 6 lun 0: <SEAGATE, DAT DAT72-052, A060> SCSI3 1/sequential removable st0: density code 0x47, 512-byte blocks, write-enabled ahc2 at pci2 dev 3 function 1 "Adaptec AHA-3960D U160" rev 0x01: irq 10 scsibus1 at ahc2: 16 targets xl1 at pci2 dev 4 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 10, address 00:04:75:ab:bf:a6 exphy1 at xl1 phy 24: 3Com internal media interface re0 at pci2 dev 9 function 0 "Realtek 8169" rev 0x10: irq 7, address 00:0f:ea:fd:51:b3 rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02 pciide1 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide1 channel 0 drive 0 scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4163B, A104> SCSI0 5/cdrom removable cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide1: channel 1 disabled (no drives) "Intel 82801EB/ER SMBus" rev 0x02 at pci0 dev 31 function 3 not configured isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> sysbeep0 at pcppi0 npx0 at isa0 port 0xf0/16: using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask ef7d netmask effd ttymask ffff pctr: user-level cycle counter enabled dkcsum: wd0 matched BIOS disk 80 dkcsum: wd1 matched BIOS disk 81 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 WARNING: / was not properly unmounted