> Actually, you can just config -e after the first boot, enable acpi,
> quit and copy the modified kernel to /bsd.mp, just like it says in the
> FAQ (actually making /bsd a link to /bsd.mp works too and ensures you
> will always be booting the mp kernel)
I did exactly that:
arktomis| sudo config -e -o bsd.mp.new /bsd.mp
OpenBSD 4.2 (GENERIC.MP) #251: Thu Aug 23 10:55:57 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
Enter 'help' for information
ukc> enable acpi
398 acpi0 enabled
ukc> quit
Saving modified kernel.
arktomis| sudo mv bsd bsd.original
arktomis| sudo ln -s bsd.mp.new ./bsd
> The only remaining nit I have with my thinkpad is the still-flaky wpi
> firmware which is needed for the 3945ABG to work. It keeps nodding
> off at random intervals, longer intervals now than earlier, but still.
mmh... I had a laptop with intel pro2200 and with iwi and the firmware
it was working perfectly... well, that's life
> getting sound out of that required
>
> # mixerctl outputs.lineout=255,255
>
> or an equivalent line in /etc/mixerctl.conf, plus presssing and
> holding the 'volume up' button for a while.
arktomis| mixerctl outputs.lineout=255,255
mixerctl: field outputs.lineout does not exist
I will have to look at these outputs a bit more in detail:
arktomis| mixerctl -a
outputs.dac02.source=hdaudio
inputs.dac03=126,126
inputs.dac04=126,126
record.adc05.mute=off
record.adc05=124,124
record.adc06.mute=off
record.adc06=124,124
inputs.mix07.sel22.mut=off
inputs.mix07.sel21.mut=off
inputs.mix0a.dac04.mut=off
inputs.mix0a.sel21.mut=off
inputs.mix0b.sel0f.mut=off
inputs.mix0b.sel21.mut=off
inputs.sel0c.source=red14
outputs.sel0c.mute=off
outputs.sel0c=124,124
inputs.sel0d.source=red14
outputs.sel0d.mute=off
outputs.sel0d=124,124
inputs.sel0e.source=dac03
inputs.sel0f.source=dac03
inputs.beep10.mute=off
inputs.beep10=119
outputs.green11.mute=off
outputs.green11.boost=off
outputs.unknown12.mute=off
outputs.unknown12.boost=off
outputs.unknown13.mute=off
outputs.unknown13=120
outputs.red14=85,85
outputs.unknown15=85,85
outputs.unknown16.mute=off
outputs.unknown16.dir=input
outputs.pow19.source=mix20
outputs.black1b.mute=off
outputs.black1b=126,126
outputs.red1c.mute=off
outputs.red1c.dir=input
outputs.widget1d.source=mix07
inputs.mix1e.sel0e.mut=off
inputs.mix1e.sel21.mut=off
inputs.mix20.red14.mut=off
inputs.mix20.black1a.m=off
inputs.mix20.sel25.mut=off
inputs.mix20.red14=120,120
inputs.mix20.black1a=120
inputs.mix20.sel25=120,120
outputs.sel21.mute=off
outputs.sel21=120,120
inputs.sel22.source=dac03
inputs.sel23.source=dac03
inputs.mix24.sel23.mut=off
inputs.mix24.sel21.mut=off
outputs.sel25=85,85
outputs.widget26.source=red14
inputs.usingdac=04
record.usingadc=05
In any case, thanks a lot!
Pau Amaro-Seoane
