Hi,
I'm having a minor problem with apm and 4.2 snapshot on a Lenovo ThinkPad R60.
I noticed that "halt -p" does not power off. I read reboot(8), and I have
"powerdown=YES" in /etc/rc.shutdown.
It might be related to apm0 not being detected, dmesg below. I also
noticed the error/warning "apm: connect error" from the boot loader, before
a kernel gets loaded. Might be related.
Loading...
probing: pc0
apm: connect error
mem[628k 3069M a20=on]
disk: hd0+
>> OpenBSD/i386 BOOT 3.01
boot>
Kernel is "4.2 (GENERIC.MP) #234", snapshot was pulled today. I did
"enable acpi" with "config -ef /bsd.mp". Same problem with 4.1-stable.
Maybe also related: In 4.2-snapshot "sysctl hw.setperf" does work, while
4.1-stable would give me "sysctl: hw.setperf: value is not available".
Any clues to get apm working?
Thanks, Olaf
dmesg:
OpenBSD 4.2 (GENERIC.MP) #234: Wed Aug 8 20:52:36 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz ("GenuineIntel" 686-class) 1.83 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 3219550208 (3070MB)
avail mem = 3120197632 (2975MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/18/07, BIOS32 rev. 0 @ 0xfd690, SMBIOS
rev. 2.4 @ 0xe0010 (68 entries)
bios0: vendor LENOVO version "7CETC6WW (2.16 )" date 04/18/2007
bios0: LENOVO 9461DXG
pcibios0 at bios0: rev 2.1 @ 0xfd620/0x9e0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #22 is the last bus
bios0: ROM list: 0xc0000/0xfe00 0xd0000/0x1600 0xd1800/0x1000 0xdc000/0x4000!
0xe0000/0x10000!
acpi0 at mainbus0: rev 2
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT SSDT SSDT SSDT
acpitimer at acpi0 not configured
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz ("GenuineIntel" 686-class) 1.83 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: duplicate apic id, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 12 (EXP3)
acpiprt6 at acpi0: bus 21 (PCI1)
acpiec at acpi0 not configured
acpicpu at acpi0 not configured
acpicpu at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpibtn at acpi0 not configured
acpibtn at acpi0 not configured
acpibat at acpi0 not configured
acpibat at acpi0 not configured
acpiac at acpi0 not configured
acpidock at acpi0 not configured
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130b2506000b25
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1833 MHz (1292 mV): speeds: 1833, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x7145 rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 2 int
17 (irq 11)
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Analog Devices AD1981HD (rev. 2.0), HDA version 1.0
azalia0: codec: Conexant/0x2bfa (rev. 0.0), HDA version 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1]: No audio function groups
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5751M" rev 0x21, BCM5750 C1
(0x4201): apic 2 int 16 (irq 11), address 00:16:d3:b8:b3:03
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 3
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 2 int
17 (irq 11), MoW2, address 00:1b:77:53:f6:6e
ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
pci5 at ppb4 bus 12
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 16
(irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 17
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
(irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 19
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 19
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci6 at ppb5 bus 21
cbb0 at pci6 dev 0 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 2 int 16 (irq
11)
"TI PCIXX12 FireWire" rev 0x00 at pci6 dev 0 function 1 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-850, RB11> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI SATA" rev 0x02: apic 2 int
16 (irq 11), AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HITACHI HTS54161, SBDI> SCSI2 0/direct fixed
sd0: 114473MB, 14593 cyl, 255 head, 63 sec, 512 bytes/sec, 234441648 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 23
(irq 11)
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ugen0 at uhub4 port 2
ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
dkcsum: sd0 matches BIOS drive 0x80
root on sd0d swap on sd0b dump on sd0b
