Hi, I was playing around a long time to get CardBus and sound working on my JVC MP-XP741. I've found, that the GENERIC.MP kernel support both if enableing acpi. To my poor mind, it seems that ioapic is needed, but simply adding it to the GENERIG confiuration file doesn't work.
Since sysctl -> hw.setperf disappears in the mp-kernel regardless using acpi or not, I'd like to add ioapic to the GENERIC kernel. Are there any sugestions? Thx and regards Dag Leine OpenBSD 4.1 (GENERIC) #4: Sat Sep 22 11:00:34 CEST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) M processor 1.10GHz ("GenuineIntel" 686-class) 1.11 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2 real mem = 795701248 (777052K) avail mem = 717955072 (701128K) using 4278 buffers containing 39907328 bytes (38972K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+ BIOS, date 10/26/04, SMBIOS rev. 2.3 @ 0xf9960 (37 entries) bios0: JVC J2NE apm0 at bios0: Power Management spec V1.2 apm0: AC on, no battery apm0: flags 30102 dobusy 0 doidle 1 pcibios at bios0 function 0x1a not configured bios0: ROM list: 0xc0000/0xd000! 0xcd000/0x1800 0xce800/0x8800 acpi at mainbus0 not configured cpu0 at mainbus0 cpu0: Enhanced SpeedStep 1100 MHz (940 mV): speeds: 1100, 1000, 900, 800, 600 MHz pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02 "Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured "Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not configured vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02: aperture at 0xf0000000, size 0x8000000 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) "Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 5 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 4 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x03: irq 7 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 3 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83 pci1 at ppb0 bus 1 cbb0 at pci1 dev 3 function 0 "Ricoh 5C475 CardBus" rev 0xb8pci_intr_map: no mapping for pin A : couldn't map interrupt "Ricoh 5C551 Firewire" rev 0x00 at pci1 dev 3 function 1 not configured iwi0 at pci1 dev 5 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 7, address 00:0e:35:c3:a9:f7 fxp0 at pci1 dev 8 function 0 "Intel 82801DB LAN" rev 0x83, i82562: irq 5, address 00:80:88:23:02:e8 inphy0 at fxp0 phy 1: i82562EM 10/100 PHY, rev. 0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03 pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1233GAS> wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 ignored (disabled) auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03pci_intr_map: no mapping for pin B "Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 biomask effd netmask effd ttymask ffff pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 OpenBSD 4.1 (GENERIC.MP) #0: Wed Sep 19 13:47:11 CEST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Pentium(R) M processor 1.10GHz ("GenuineIntel" 686-class) 1.11 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2 real mem = 795701248 (777052K) avail mem = 717893632 (701068K) using 4278 buffers containing 39907328 bytes (38972K) of memory User Kernel Config UKC> enable api\^H \^H\^H \^Hcpi 388 acpi0 enabled UKC> disable apm 298 apm0 disabled UKC> quit Continuing... mainbus0 (root) bios0 at mainbus0: AT/286+ BIOS, date 10/26/04, SMBIOS rev. 2.3 @ 0xf9960 (37 entries) bios0: JVC J2NE apm at bios0 function 0x15 not configured pcibios at bios0 function 0x1a not configured bios0: ROM list: 0xc0000/0xd000! 0xcd000/0x1800 0xce800/0x8800 acpi0 at mainbus0: rev 0 acpi0: tables DSDT FACP APIC OEMB acpitimer at acpi0 not configured acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 100 MHz ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (P0P1) acpiec at acpi0 not configured acpiac at acpi0 not configured acpibat at acpi0 not configured acpibat at acpi0 not configured acpibtn at acpi0 not configured acpibtn at acpi0 not configured acpicpu at acpi0 not configured acpitz at acpi0 not configured pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02 "Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured "Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not configured vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02: aperture at 0xf0000000, size 0x8000000 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) "Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: apic 1 int 16 (irq 5) usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: apic 1 int 19 (irq 4) usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x03: apic 1 int 18 (irq 7) usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: apic 1 int 23 (irq 3) usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83 pci1 at ppb0 bus 1 cbb0 at pci1 dev 3 function 0 "Ricoh 5C475 CardBus" rev 0xb8: apic 1 int 17 (irq 0) "Ricoh 5C551 Firewire" rev 0x00 at pci1 dev 3 function 1 not configured iwi0 at pci1 dev 5 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: apic 1 int 18 (irq 7), address 00:0e:35:c3:a9:f7 fxp0 at pci1 dev 8 function 0 "Intel 82801DB LAN" rev 0x83, i82562: apic 1 int 20 (irq 5), address 00:80:88:23:02:e8 inphy0 at fxp0 phy 1: i82562EM 10/100 PHY, rev. 0 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 0 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03 pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1233GAS> wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 ignored (disabled) auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: apic 1 int 17 (irq 0), ICH4 AC97 ac97: codec id 0x41445360 (Analog Devices AD1885) ac97: codec features headphone, Analog Devices Phat Stereo audio0 at auich0 "Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302