Re: OpenBSD 4.2-current | ASUS P5VD2-X and E2140 problems

[Pierre Riteau]

Le 8 oct. 07 ` 17:44, [EMAIL PROTECTED] a icrit :

Hi guys,

I ask at misc because I#m unsure if these problems are known.

During reading the CHangelog I noticed the ALC883 Chip was added to
Azalia.
Well this Chip is at this Motherboard but I can't get it working.
The BIOS supports to either set it into the HDA Mode or into the AC97
mode. neither works (wont even get displayed in the dmesg).
A 3rd mode for Vista compatibility wa salso checked with no success.

Except this OpenBSD 4.2-current (and so 4.2) does boot fine.
I noticed just 2 further issues.

1. The Intel E2140 supports SpeedStep but it isn't ntoiced (even after
activation in the BIOS).
2. SMP doesn#t work
 - I tried also twith ACPI-ENABLE

I just wanna know: Is there a solution known for the last 2 things?
Does somebody own the same Board (or familiar with VIA 890!).
Single-Core works fine.

I may would have the possibility to change the Board (to a MSI MSI
P4M890M
Rev 1.2).

I need to replace a Desktop Board so the MSI would even provide
integrated
Grafic (wich is ok for this case).
So are these things Board related (well the Crash in SMP mode propably
isn't but the issue with the Soundchip may is) or maybe OpenBSD
related?

I have an Asrock motherboard with a VIA chipset (but not the same).
If I want my azalia device to be detected, I need to go in the BIOS
and change
it's PCI bus from 0x80 to 0x2 (there is an option for this).

Maybe your card has a similar setting?

Here's a dmesg with a generic Kernel from install42.iso

--
OpenBSD 4.2-current (GENERIC) #410: Fri Oct  5 22:31:12 MDT 2007
    [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Genuine Intel(R) CPU 2140 @ 1.60GHz ("GenuineIntel" 686-
class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3
6,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,EST,TM2,CX16,xTPR
real mem  = 535261184 (510MB)
avail mem = 509779968 (486MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/29/07, BIOS32 rev. 0 @
0xf1d70,
SMBIOS rev. 2.4 @ 0xf0000 (52 entries)
bios0: vendor Phoenix Technologies, LTD version "ASUS P5VD2-X ACPI
BIOS
Revision 0501" date 06/29/2007
bios0: ASUSTeK Computer INC. P5VD2-X
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xdc94
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdad0/400 (23 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev
0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xd000 0xd0000/0x3000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA P4M890 Host" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA P4M890 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA P4M890 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA P4M890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA P4M890 Host" rev 0x00
"VIA P4M890 IOAPIC" rev 0x00 at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 6 "VIA P4M890 Security" rev 0x00
pchb6 at pci0 dev 0 function 7 "VIA P4M890 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci0 dev 2 function 0 "VIA P4M890 PCI-PCI" rev 0x00
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "ATI Radeon X300" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon X300 Sec" rev 0x00 at pci2 dev 0 function 1 not configured
ppb2 at pci0 dev 3 function 0 "VIA P4M890 PCI-PCI" rev 0x00
pci3 at ppb2 bus 3
jmb0 at pci3 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x02
ahci0 at jmb0: irq 11, AHCI 1.0
scsibus0 at ahci0: 32 targets
pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1
wired to
native-PCI
pciide0: using irq 11 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 15 function 0 "VIA VT8237A SATA" rev 0x80: DMA
pciide1: using irq 11 for native-PCI interrupt
pciide2 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x07: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide2 channel 0 drive 0: <Maxtor 6Y120L0>
wd0: 16-sector PIO, LBA, 117246MB, 240121728 sectors
wd0(pciide2:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide2 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, CD/DVDW SH-S162L, TS06> SCSI0
5/cdrom removable
cd0(pciide2:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0xa0: irq 5
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0xa0: irq 5
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0xa0: irq 5
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0xa0: irq 5
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: "VIA EHCI root hub", rev 2.00/1.00, addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237A ISA" rev 0x00
iic0 at viapm0
iic0: addr 0x22 00=c3 01=8b 02=38 04=03 05=45 06=02 08=9c 09=34 0a=27
0b=c0 0c=49 0d=ca 10=18 12=80 13=80 14=01 1a=eb 1f=01 28=9c 29=34
2a=27
2b=c0 2c=49 2d=ca 2f=89 40=c3 41=8b 42=38 44=03 45=45 46=02 48=9c
49=34
4a=27 4b=c0 4c=49 4d=ca 50=18 52=80 53=80 54=01 5a=eb 5f=01 68=9c
69=34
6a=27 6b=c0 6c=49 6d=ca 6f=89 80=c3 81=8b 82=38 84=03 85=45 86=02
88=9c
89=34 8a=27 8b=c0 8c=49 8d=ca 90=18 92=80 93=80 94=01 9a=eb 9f=01
a8=9c
a9=34 aa=27 ab=c0 ac=49 ad=ca af=89 c0=c3 c1=8b c2=38 c4=03 c5=45
c6=02
c8=9c c9=34 ca=27 cb=c0 cc=49 cd=ca d0=18 d2=80 d3=80 d4=01 da=eb
df=01
e8=9c e9=34 ea=27 eb=c0 ec=49 ed=ca ef=89
pchb7 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00
pchb8 at pci0 dev 19 function 0 "VIA VT8237A PCI-PCI" rev 0x00
ppb3 at pci0 dev 19 function 1 "VIA VT8237A PCI-PCI" rev 0x00
pci4 at ppb3 bus 4
re0 at pci4 dev 7 function 0 "Realtek 8169SC" rev 0x10:
RTL8169/8110SCd
(0x1800), irq 10, address
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: "VIA UHCI root hub", rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: "VIA UHCI root hub", rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: "VIA UHCI root hub", rev 1.00/1.00, addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4: "VIA UHCI root hub", rev 1.00/1.00, addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask fb6d netmask ff6d ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 4 configuration 1 interface 0
umass0: "JMicron USB to ATA/ATAPI Bridge", rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd0 at scsibus2 targ 1 lun 0: <TOSHIBA, MK2018GAP, 2 A> SCSI2 0/
direct fixed
sd0: 19077MB, 2432 cyl, 255 head, 63 sec, 512 bytes/sec, 39070080
sec total
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: "Microsoft Basic Optical Mouse", rev 1.10/0.00, addr 2,
iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: sd0 matches BIOS drive 0x81
root on wd0a swap on wd0b dump on wd0b
--

Thanks for any advise.

Kind regards,
Sebastian

p.s.
eSATA is a nice feature on the ASUS but nothing I depend on.
So if somebody owns such a MSI Board and tells me "well everything
rocks
there" I'll switch the Boards. :)