Hello.
I have HP 6510b notebook.
OpenBSD works fine on it, except the fan.
It doesn't react to temperature changes at all, the speed is very slow
and constant, and the result of this is that cpu is overheating.
I was trying to enable acpi, but all i get is panic error.
Is there any way to speed up this fan? Any solutions?
Regards.
OpenBSD 4.2-current (GENERIC) #1211: Tue Oct 16 22:06:05 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1064628224 (1015MB)
avail mem = 1022320640 (974MB)
User Kernel Config
UKC> enable acpi
272 acpi0 enabled
UKC> enable acpiec
273 acpiec* enabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf25ba (25 entries)
bios0: vendor Hewlett-Packard version "68DDU Ver. F.0B" date 08/02/2007
bios0: Hewlett-Packard HP Compaq 6510b (GB866EA#AKD)
acpi0 at mainbus0: rev 2
acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT SSDT
acpitimer at acpi0 not configured
wrong setbufint type
2ca1 Called: \\_SB_.C003.C098.C155
arg0: 0xffff8000000f4620 cnt:01 stk:00 objref: 0xffff80000003b888
index:ffffffff
[\\_SB_.C06A] 0xffff80000003b888 cnt:02 stk:00 field: bitpos=02e0
bitlen=00a0 ref1:38188 ref2:0 [Field]
[\\_SB_.C043] 0xffff800000038188 cnt:32 stk:00 opregion: 00,3f7e7dc0,140
arg1: 0xffff8000000f4660 cnt:01 stk:00 objref: 0xffff8000000eec20
index:ffffffff
0xffff8000000eec20 cnt:00 stk:60 integer: 0
local0: 0xffff8000000ee820 cnt:00 stk:60 integer: 0
2c7d Called: \\_SB_.C003.C098._INI
local0: 0xffff8000000eec20 cnt:00 stk:60 integer: 0
panic: aml_die aml_setbufint:982
Stopped at Debugger+0x5: leave
Debugger() at Debugger+0x5
panic() at panic+0x12a
_aml_die() at _aml_die+0xdc
aml_setbufint() at aml_setbufint+0x46
aml_fieldio() at aml_fieldio+0x6f
aml_derefvalue() at aml_derefvalue+0xea
aml_evalterm() at aml_evalterm+0x32
aml_parseterm() at aml_parseterm+0x48
aml_parseref() at aml_parseref+0x2a0
aml_parseop() at aml_parseop+0xb4
end trace frame: 0xffffffff80bd2800, count: 0
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> Debugger() at Debugger+0x5
panic() at panic+0x12a
_aml_die() at _aml_die+0xdc
aml_setbufint() at aml_setbufint+0x46
aml_fieldio() at aml_fieldio+0x6f
aml_derefvalue() at aml_derefvalue+0xea
aml_evalterm() at aml_evalterm+0x32
aml_parseterm() at aml_parseterm+0x48
aml_parseref() at aml_parseref+0x2a0
aml_parseop() at aml_parseop+0xb4
aml_parseterm() at aml_parseterm+0x3a
aml_callmethod() at aml_callmethod+0x3a
aml_evalmethod() at aml_evalmethod+0x59
aml_derefvalue() at aml_derefvalue+0x7e
aml_derefvalue() at aml_derefvalue+0x118
aml_evalterm() at aml_evalterm+0x32
aml_parseterm() at aml_parseterm+0x48
aml_parseref() at aml_parseref+0x11d
aml_parseop() at aml_parseop+0xb4
aml_parseterm() at aml_parseterm+0x3a
aml_parsewhile() at aml_parsewhile+0x4e
aml_parseop() at aml_parseop+0xb4
aml_parseterm() at aml_parseterm+0x3a
aml_callmethod() at aml_callmethod+0x3a
aml_evalmethod() at aml_evalmethod+0x59
aml_evalnode() at aml_evalnode+0xd9
acpi_inidev() at acpi_inidev+0x89
aml_find_node() at aml_find_node+0x88
aml_find_node() at aml_find_node+0x7d
aml_find_node() at aml_find_node+0x7d
aml_find_node() at aml_find_node+0x7d
acpi_attach() at acpi_attach+0x3bd
config_attach() at config_attach+0x11b
mainbus_attach() at mainbus_attach+0x205
config_attach() at config_attach+0x11b
cpu_configure() at cpu_configure+0x1c
main() at main+0x3b3
end trace frame: 0x0, count: -37
ddb> PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0x80200 swapper
ddb> rebooting...
dmesg:
OpenBSD 4.2-current (GENERIC) #1211: Tue Oct 16 22:06:05 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1064628224 (1015MB)
avail mem = 1022320640 (974MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf25ba (25 entries)
bios0: vendor Hewlett-Packard version "68DDU Ver. F.0B" date 08/02/2007
bios0: Hewlett-Packard HP Compaq 6510b (GB866EA#AKD)
acpi at mainbus0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz, 1795.78 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06170a2d06000a2d
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 2000 MHz (1420 mV): speeds: 2000, 1200 MHz
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel 82965GM MCH" rev 0x0c
vga1 at pci0 dev 2 function 0 "Intel 82965GM Video" rev 0x0c
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82965GM Video" rev 0x0c at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: irq 10
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: irq 10
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: irq 10
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Analog Devices AD1981HD (rev. 2.0), HDA version 1.0
azalia0: codec: AT&T/Lucent/0x1040 (rev. 2.0), HDA version 1.0
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1]: No audio function groups
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03
pci1 at ppb0 bus 8
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03
pci2 at ppb1 bus 16
wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: irq
10, MoW2, address 00:1b:77:1c:a5:1f
ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03
pci3 at ppb2 bus 24
bge0 at pci3 dev 0 function 0 "Broadcom BCM5787M" rev 0x02, BCM5754/5787
A2 (0xb002): irq 11, address 00:17:a4:ea:23:af
brgphy0 at bge0 phy 1: BCM5787 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03
pci4 at ppb3 bus 40
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: irq 10
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: irq 10
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: irq 11
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: irq 10
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci5 at ppb4 bus 2
cbb0 at pci5 dev 4 function 0 "Ricoh 5C476 CardBus" rev 0xb6: irq 5
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-T10N, PC05> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x03: irq 10,
AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54161, SBDO> SCSI2
0/direct fixed
sd0: 114473MB, 14593 cyl, 255 head, 63 sec, 512 bytes/sec, 234441648 sec
total
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
pctr: user-level performance counters enabled
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a swap on sd0b dump on sd0b
--
Rafal Brodewicz
[EMAIL PROTECTED]
