I've got a Compaq DL380G1 with a Smart 5300 card (ciss). I've got an
array plugged into port 1, and a tape plugged into port 2. The BIOS
setup for the card sees everything, but OpenBSD doesn't see the tape,
nothing in dmesg. I don't even see the second scsibus for ciss. Any
suggestions?
OpenBSD 4.1-stable (GENERIC.MP) #3: Thu Oct 18 23:28:07 EDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 931 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 804859904 (785996K)
avail mem = 726265856 (709244K)
using 4278 buffers containing 40366080 bytes (39420K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000,
SMBIOS rev. 2.3 @ 0xf206c (25 entries)
bios0: Compaq ProLiant DL380
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 7 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks OSB4" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x4000
0xe8000/0x6000 0xee000/0x2000!
acpi at mainbus0 not configured
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 132 MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III ("GenuineIntel" 686-class) 931 MHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
mainbus0: bus 0 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 9 is type ISA
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 11, 35 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x05
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x05
pci1 at pchb1 bus 3
ciss0 at pci1 dev 5 function 0 "Compaq Smart Array 5300 rev.2" rev 0x02:
apic 8 int 11 (irq 11)
ciss0: 1 LD, HW rev 0, FW 3.54/3.54
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <COMPAQ, LOGICAL VOLUME, 3.54> SCSI0
0/direct fixed
sd0: 69455MB, 69455 cyl, 64 head, 32 sec, 512 bytes/sec, 142245120 sec total
cac0 at pci0 dev 1 function 0 "Symbios Logic 53c1510" rev 0x02: apic 8
int 5 (irq 5) Compaq Integrated Array
cac0: no volumes defined
fxp0 at pci0 dev 2 function 0 "Intel 8255x" rev 0x08, i82559: apic 8 int
10 (irq 10), address 00:02:a5:28:55:62
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
"ATI Mach64 GV" rev 0x7a at pci0 dev 3 function 0 not configured
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 4 function 0 not configured
ppb0 at pci0 dev 5 function 0 "Intel S21152BB PCI-PCI" rev 0x00
pci2 at ppb0 bus 1
vga1 at pci2 dev 0 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq Netelligent ASMC" rev 0x00 at pci2 dev 1 function 0 not configured
vendor "Compaq", unknown product 0x005a (class memory subclass
miscellaneous, rev 0x00) at pci2 dev 2 function 0 not configured
vendor "Compaq", unknown product 0x00b1 (class memory subclass
miscellaneous, rev 0x01) at pci2 dev 4 function 0 not configured
piixpm0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x4f: SMBus
disabled
pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-224E, 9.0B> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
