I have ospf running between OpenBSD 4.2 GENERIC.MP#304 i386 and a 1721 Cisco running c1700-k9o3sy7-mz.123-23.bin. "ospfctl show fib ospf" shows 2 networks, the loopbacks and the gre link however "ospfctl show database area 0.0.0.0" shows only the loopbacks, why doesn't the database show the gre link, and how is there an ospf route in the fib when its not in the database?
Thank you for any help # ospfctl show data area 0.0.0.0 Router Link States (Area 0.0.0.0) Link ID Adv Router Age Seq# Checksum 192.168.179.1 192.168.179.1 988 0x80000003 0xe33b 192.168.179.2 192.168.179.2 959 0x8000002e 0x0fbe # ospfctl show fib osp flags: * = valid, O = OSPF, C = Connected, S = Static Flags Destination Nexthop *O 172.16.0.0/30 172.16.0.2 *O 192.168.179.2/32 172.16.0.2 # ifconfig gre0 inet gre0: flags=9011<UP,POINTOPOINT,LINK0,MULTICAST> mtu 1476 groups: gre physical address inet X --> X inet 172.16.0.1 --> 172.16.0.2 netmask 0xfffffffc # cat /etc/ospfd.conf router-id 192.168.179.1 area 0.0.0.0 { interface lo1:192.168.179.1 interface gre0 } Router#sho run | b ospf router ospf 179 router-id 192.168.179.2 log-adjacency-changes network 172.16.0.0 0.0.15.255 area 0 network 192.168.179.0 0.0.0.255 area 0 -- -Lawrence -Student ID 1028219