Thanks Calomel, I'll try to get some of these, which I have in another server.
When I have it done, I'll report. Kind regards, On Nov 16, 2007 2:57 PM, Calomel <[EMAIL PROTECTED]> wrote: > Fernando, > > Doing a quick google search I see other people have also reported problems > with the on board Broadcom BCM5708 on the dells. Can you try another > network card like the Intel Pro/1000 MT (OpenBSD interface name: em0) ? > > My place of business transfers an average of 450Mbit with OpenBSD 4.1/4.2 > with ALTQ (HFSC) without issue. CPU usage for the interrupts are around 33% > on a amd64 2.2GHz. > > -- > Calomel @ http://calomel.org > Open Source Research and Reference > > > > On Mon, Nov 12, 2007 at 02:05:54PM -0300, Fernando Braga wrote: > >Hi, > > > >I've setup a bridge over a 200Mb link, and everytime I turn ALTQ on, > >top shows interrupts at 99.2%. If I flush queue (pfctl -Fq), interrupt > >usage drop to 35% instantly. I've also noticed that only cpu0 is able > >to handle interrupts. > > > >Is there a way to minimize interrupts usage in this configuration ? > > > >My pf.conf is: > > > ># $OpenBSD: pf.conf,v 1.34 2007/02/24 19:30:59 millert Exp $ > > > >ext_if="bnx0" > >int_if="bnx1" > > > >table <network-int> persist { 200.254.131.128/25 } > >table <redes-biz> persist file "/etc/pf.biz" > > > >set skip on lo > >set limit states 750000 > > > >scrub in > > > >altq on $int_if bandwidth 1000Mb hfsc queue { local, embratel } > >altq on $ext_if bandwidth 1000Mb hfsc queue { local, embratel } > > > >queue local bandwidth 100Mb hfsc > > > >queue embratel bandwidth 200Mb hfsc(ecn realtime 200Mb upperlimit > >200Mb ) \ > > { Q-pri Q-icmp Q-vpn Q-biz Q-mail Q-http Q-ftp Q-def } > > > >queue Q-pri bandwidth 25Mb hfsc(realtime 15Mb linkshare 25Mb > >upperlimit 180Mb) priority 7 > >queue Q-icmp bandwidth 25Mb hfsc(realtime 15Mb linkshare 25Mb > >upperlimit 30Mb) priority 7 > >queue Q-vpn bandwidth 25Mb hfsc(realtime 15Mb linkshare 25Mb > >upperlimit 180Mb) priority 6 > >queue Q-biz bandwidth 25Mb hfsc(realtime 15Mb linkshare 25Mb > >upperlimit 180Mb) priority 6 > >queue Q-mail bandwidth 25Mb hfsc(realtime 15Mb linkshare 25Mb > >upperlimit 180Mb) priority 4 > >queue Q-http bandwidth 25Mb hfsc(realtime 15Mb linkshare 25Mb > >upperlimit 180Mb) priority 4 > >queue Q-ftp bandwidth 25Mb hfsc(realtime 15Mb linkshare 25Mb > >upperlimit 180Mb) priority 4 > >queue Q-def bandwidth 25Mb hfsc(default linkshare 25Mb > >upperlimit 128Mb) priority 0 > > > >block in log > >pass out > > > >antispoof quick for { lo $ext_if } > >pass in quick on lo0 no state > > > >## Regras de merovingio -- bridge > >pass in on $ext_if proto tcp to ($ext_if) port ssh queue(local) > > > >pass in on $int_if > >queue(Q-def Q-pri) label "int-DEFA" > >pass in on $int_if proto icmp > >queue(Q-icmp ) label "int-ICMP" > >pass in on $int_if proto gre > >queue(Q-vpn ) label "int-VPN-gre" > >pass in on $int_if proto esp > >queue(Q-vpn ) label "int-VPN-esp" > >pass in on $int_if proto ah > >queue(Q-vpn ) label "int-VPN-ah" > >pass in on $int_if proto l2tp > >queue(Q-vpn ) label "int-VPN-l2tp" > >pass in on $int_if proto { tcp udp } to port { 500 4500 } > >queue(Q-vpn ) label "int-VPN-ipsec" > >pass in on $int_if proto { tcp udp } to port { pptp } > >queue(Q-vpn ) label "int-VPN-pptp" > >pass in on $int_if proto tcp to port { snmp } > >queue(Q-icmp Q-pri) label "int-ICMP-snmp" > >pass in on $int_if proto tcp to port { www } > >queue(Q-http Q-pri) label "int-HTTP" > >pass in on $int_if proto tcp to port { https } > >queue(Q-biz Q-pri) label "int-BIZZ-https" > >pass in on $int_if proto { tcp udp } to port { domain ntp } queue( > > Q-pri) label "int-PRII" > > > >pass in on $int_if to <redes-biz> > >queue(Q-biz Q-pri) label "int-BIZZ-redes" > >pass in on $int_if proto tcp to port { smtp pop3 imap 465 995 } > >queue(Q-mail q-pri) label "int-MAIL" > > > >pass in on $ext_if > >queue(Q-def Q-pri) label "ext-DEFA" > >pass in on $ext_if proto icmp > >queue(Q-icmp ) label "ext-ICMP" > >pass in on $ext_if proto gre > >queue(Q-vpn ) label "ext-VPN-gre" > >pass in on $ext_if proto esp > >queue(Q-vpn ) label "ext-VPN-esp" > >pass in on $ext_if proto ah > >queue(Q-vpn ) label "ext-VPN-ah" > >pass in on $ext_if proto l2tp > >queue(Q-vpn ) label "ext-VPN-l2tp" > >pass in on $ext_if proto { tcp udp } to port { 500 4500 } > >queue(Q-vpn ) label "ext-VPN-ipsec" > >pass in on $ext_if proto { tcp udp } to port { pptp } > >queue(Q-vpn ) label "ext-VPN-pptp" > >pass in on $ext_if proto tcp to port { snmp } > >queue(Q-icmp Q-pri) label "ext-ICMP-snmp" > >pass in on $ext_if proto tcp to port { www } > >queue(Q-http Q-pri) label "ext-HTTP" > >pass in on $ext_if proto tcp to port { https } > >queue(Q-biz Q-pri) label "ext-BIZZ-https" > >pass in on $ext_if proto { tcp udp } to port { domain ntp } queue( > > Q-pri) label "ext-PRII" > > > >pass in on $ext_if from <redes-biz> > >queue(Q-biz Q-pri) label "ext-BIZZ-https" > >pass in on $ext_if proto tcp to port { smtp pop3 imap 465 995 } > >queue(Q-mail q-pri) label "ext-MAIL" > > > >dmesg follows: > > > >OpenBSD 4.2 (GENERIC.MP) #1378: Tue Aug 28 10:48:58 MDT 2007 > > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > >real mem = 3488907264 (3327MB) > >avail mem = 3373899776 (3217MB) > >mainbus0 at root > >bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xcffbc000 (62 entries) > >bios0: vendor Dell Inc. version "1.3.7" date 03/26/2007 > >bios0: Dell Inc. PowerEdge 1950 > >acpi at mainbus0 not configured > >ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca8/8 spacing 4 > >mainbus0: Intel MP Specification (Version 1.4) > >cpu0 at mainbus0: apid 0 (boot processor) > >cpu0: Intel(R) Xeon(R) CPU E5345 @ 2.33GHz, 2327.87 MHz > >cpu0: > >FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG > >cpu0: 4MB 64b/line 16-way L2 cache > >cpu0: apic clock running at 332MHz > >cpu1 at mainbus0: apid 3 (application processor) > >cpu1: Intel(R) Xeon(R) CPU E5345 @ 2.33GHz, 2327.53 MHz > >cpu1: > >FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG > >cpu1: 4MB 64b/line 16-way L2 cache > >cpu2 at mainbus0: apid 2 (application processor) > >cpu2: Intel(R) Xeon(R) CPU E5345 @ 2.33GHz, 2327.53 MHz > >cpu2: > >FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG > >cpu2: 4MB 64b/line 16-way L2 cache > >cpu3 at mainbus0: apid 1 (application processor) > >cpu3: Intel(R) Xeon(R) CPU E5345 @ 2.33GHz, 2327.53 MHz > >cpu3: > >FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG > >cpu3: 4MB 64b/line 16-way L2 cache > >mpbios: bus 0 is type PCI > >mpbios: bus 1 is type PCI > >mpbios: bus 2 is type PCI > >mpbios: bus 3 is type PCI > >mpbios: bus 4 is type PCI > >mpbios: bus 5 is type PCI > >mpbios: bus 6 is type PCI > >mpbios: bus 7 is type PCI > >mpbios: bus 8 is type PCI > >mpbios: bus 9 is type PCI > >mpbios: bus 10 is type PCI > >mpbios: bus 11 is type PCI > >mpbios: bus 12 is type PCI > >mpbios: bus 13 is type PCI > >mpbios: bus 14 is type PCI > >mpbios: bus 15 is type PCI > >mpbios: bus 16 is type PCI > >mpbios: bus 17 is type ISA > >ioapic0 at mainbus0 apid 4 pa 0xfec00000, version 20, 24 pins > >ioapic0: misconfigured as apic 0, remapped to apid 4 > >ioapic1 at mainbus0 apid 5 pa 0xfec81000, version 20, 24 pins > >ioapic1: misconfigured as apic 0, remapped to apid 5 > >pci0 at mainbus0 bus 0: configuration mode 1 > >pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12 > >ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12 > >pci1 at ppb0 bus 6 > >ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01 > >pci2 at ppb1 bus 7 > >ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01 > >pci3 at ppb2 bus 8 > >ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3 > >pci4 at ppb3 bus 9 > >bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 4 int 16 > >(irq 5) > >ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01 > >pci5 at ppb4 bus 10 > >ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01 > >pci6 at ppb5 bus 11 > >ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12 > >pci7 at ppb6 bus 1 > >ppb7 at pci7 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00 > >pci8 at ppb7 bus 2 > >mfi0 at pci8 dev 14 function 0 "Dell PERC 5" rev 0x00: apic 5 int 14 (irq 6) > >mfi0: logical drives 1, version 5.1.1-0040, 256MB RAM > >scsibus0 at mfi0: 1 targets > >sd0 at scsibus0 targ 0 lun 0: <DELL, PERC 5/i, 1.03> SCSI3 0/direct fixed > >sd0: 152064MB, 19385 cyl, 255 head, 63 sec, 512 bytes/sec, 311427072 sec > >total > >ppb8 at pci7 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00 > >pci9 at ppb8 bus 3 > >ppb9 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0x12 > >pci10 at ppb9 bus 12 > >ppb10 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12 > >pci11 at ppb10 bus 13 > >ppb11 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x12 > >pci12 at ppb11 bus 14 > >ppb12 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12 > >pci13 at ppb12 bus 15 > >pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12 > >pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12 > >pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12 > >pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12 > >pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12 > >pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12 > >pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12 > >ppb13 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09 > >pci14 at ppb13 bus 4 > >ppb14 at pci14 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3 > >pci15 at ppb14 bus 5 > >bnx1 at pci15 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 4 int > >16 (irq 5) > >uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 4 > >int 21 (irq 11) > >uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 4 > >int 20 (irq 10) > >uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 4 > >int 21 (irq 11) > >ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 4 > >int 21 (irq 11) > >usb0 at ehci0: USB revision 2.0 > >uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1 > >ppb15 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9 > >pci16 at ppb15 bus 16 > >vga1 at pci16 dev 13 function 0 "ATI ES1000" rev 0x02 > >wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > >wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > >pcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09 > >pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, > >channel 0 configured to compatibility, channel 1 configured to > >compatibility > >atapiscsi0 at pciide0 channel 0 drive 0 > >scsibus1 at atapiscsi0: 2 targets > >cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCC4244, B101> SCSI0 > >5/cdrom removable > >cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > >pciide0: channel 1 ignored (disabled) > >usb1 at uhci0: USB revision 1.0 > >uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1 > >usb2 at uhci1: USB revision 1.0 > >uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1 > >usb3 at uhci2: USB revision 1.0 > >uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1 > >isa0 at pcib0 > >isadma0 at isa0 > >com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > >com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > >pckbc0 at isa0 port 0x60/5 > >pckbd0 at pckbc0 (kbd slot) > >pckbc0: using irq 1 for kbd slot > >wskbd0 at pckbd0: console keyboard, using wsdisplay0 > >pcppi0 at isa0 port 0x61 > >midi0 at pcppi0: <PC speaker> > >spkr0 at pcppi0 > >uhub4 at uhub0 port 1: Dell product 0xa001, rev 2.00/0.00, addr 2 > >uhub4: device problem, disabling port 1 > >umass0 at uhub4 port 2 configuration 1 interface 0 > >umass0: DELL INC. DRAC5 VIRTUAL MEDIA, rev 2.00/0.00, addr 3 > >umass0: using SCSI over Bulk-Only > >scsibus2 at umass0: 2 targets > >cd1 at scsibus2 targ 1 lun 0: <Dell, Virtual CDROM, 123> SCSI0 5/cdrom > >removable > >umass1 at uhub4 port 2 configuration 1 interface 1 > >umass1: DELL INC. DRAC5 VIRTUAL MEDIA, rev 2.00/0.00, addr 3 > >umass1: using SCSI over Bulk-Only > >scsibus3 at umass1: 2 targets > >sd1 at scsibus3 targ 1 lun 0: <Dell, Virtual Floppy, 123> SCSI0 > >0/direct removable > >sd1: drive offline > >uhub5 at uhub0 port 5: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 4 > >uhidev0 at uhub2 port 1 configuration 1 interface 0 > >uhidev0: vendor 0x04d9 product 0x1400, rev 1.10/1.43, addr 2, iclass 3/1 > >ukbd0 at uhidev0: 8 modifier keys, 6 key codes > >wskbd1 at ukbd0 mux 1 > >wskbd1: connecting to wsdisplay0 > >uhidev1 at uhub2 port 1 configuration 1 interface 1 > >uhidev1: vendor 0x04d9 product 0x1400, rev 1.10/1.43, addr 2, iclass 3/1 > >uhidev1: 3 report ids > >ums0 at uhidev1 reportid 1: 5 buttons and Z dir. > >wsmouse0 at ums0 mux 0 > >uhid0 at uhidev1 reportid 2: input=3, output=0, feature=0 > >uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0 > >dkcsum: sd0 matches BIOS drive 0x80 > >root on sd0a swap on sd0b dump on sd0b > >bnx1: address 00:19:b9:eb:75:d1 > >brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6 > >bnx0: address 00:19:b9:eb:75:d3 > >brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6 > > > >Thanks in advance, > > > >-- > >Fernando M. Braga > >+55 82 8802-9559 > -- Fernando M. Braga +55 82 8802-9559