I'd like to get wireless networking working on my Toshiba A135-S4656
laptop. The built-in AR5424 isn't working for me, but I think ath(4)
support for it is still a work-in-progress, so I'm trying to use a
D-Link DWL-650 in the PCMCIA slot for now. This appears to be supported
by wi(4) "D-Link DWL-650 (rev A1-J3 only) Prism-2.5 PCMCIA". My
card says "Rev:J3" on the back.
I can't get a wi0 to show up in my output from ifconfig on 4.2 AMD64,
and I don't see it recognizing the pcmcia connection. I've tried 4.2
i386, which seems to recognize the pcmcia, but still doesn't produce a
wi0 in ifconfig and produces the following two errors:
"pcic_wait_ready: ready never happened, state = 4c"
"pccom3 at pcmcia0 function 0: can't allocate i/o space"
Inserting the card before boot or after login didn't seem to change much.
Per pcmcia(4) I tried changing the address and size parameters with
boot_config(8) and config(8). On amd64 I was not able to find the
relevant driver. On i386 I was unable to make things better, but I was
able to disable the driver and see the effect.
What should I try next? Is amd64 expected to support pcmcia differently?
Below are the dmesg outputs from both amd64 and i386 (same machine) and
the ifconfig output.
Thanks,
Andrew Hart
ifconfig.amd64:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33168
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:1b:9e:1a:87:74
groups: wlan
media: IEEE802.11 autoselect
status: no network
ieee80211: nwid ""
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:16:d4:fd:87:c6
groups: egress
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet6 fe80::216:d4ff:fefd:87c6%re0 prefixlen 64 scopeid 0x2
inet 192.168.0.102 netmask 0xffffff00 broadcast 192.168.0.255
enc0: flags=0<> mtu 1536
dmesg.amd64.CardInsertedPriorToBoot:
OpenBSD 4.2 (GENERIC) #1179: Tue Aug 28 10:37:50 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 526512128 (502MB)
avail mem = 499818496 (476MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xdc010 (22 entries)
bios0: vendor TOSHIBA version "V1.40" date 04/26/2007
bios0: TOSHIBA Satellite A135
acpi at mainbus0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Celeron(R) M CPU 520 @ 1.60GHz, 1596.25 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CX16,xTPR,LONG
cpu0: 1MB 64b/line 4-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: irq 11
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Realtek/0x0862 (rev. 0.1), HDA version 1.0
azalia0: codec: AT&T/Lucent/0x1040 (rev. 2.0), HDA version 1.0
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1]: No audio function groups
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 4
ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: irq 10
ath0: AR5424 10.0 phy 6.1 rf 10.2, WOR4W, address 00:1b:9e:1a:87:74
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 5
re0 at pci3 dev 0 function 0 "Realtek 8101E" rev 0x01: RTL8101E
(0x3400), irq 11, address 00:16:d4:fd:87:c6
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: irq 11
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 6
cbb0 at pci4 dev 4 function 0 "TI PCIXX12 CardBus" rev 0x00: couldn't
map interrupt
"TI PCIXX12 FireWire" rev 0x00 at pci4 dev 4 function 1 not configured
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci4 dev 4 function 2
not configured
sdhc0 at pci4 dev 4 function 3 "TI PCIXX12 Secure Data" rev 0x00: irq 10
sdmmc0 at sdhc0
pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK8037GSX>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-850S, 1.90> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: irq 11
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
dmesg.i386.CardInsertedProirToBoot:
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M CPU 520 @ 1.60GHz ("GenuineIntel" 686-class)
1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CX16,xTPR
real mem = 526479360 (502MB)
avail mem = 501411840 (478MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/26/07, BIOS32 rev. 0 @ 0xfdca4,
SMBIOS rev. 2.4 @ 0xdc010 (22 entries)
bios0: vendor TOSHIBA version "V1.40" date 04/26/2007
bios0: TOSHIBA Satellite A135
pcibios0: pcibios_get_status - function not supported
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1000 0xdc000/0x4000!
0xe0000/0x1c00!
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03: aperture
at 0xc0000000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: irq 11
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Realtek/0x0862 (rev. 0.1), HDA version 1.0
azalia0: codec: AT&T/Lucent/0x1040 (rev. 2.0), HDA version 1.0
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1]: No audio function groups
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 4
ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: irq 10
ath0: AR5424 10.0 phy 6.1 rf 10.2, WOR4W, address 00:1b:9e:1a:87:74
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 5
re0 at pci3 dev 0 function 0 "Realtek 8101E" rev 0x01: RTL8101E
(0x3400), irq 11, address 00:16:d4:fd:87:c6
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: irq 11
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 6
cbb0 at pci4 dev 4 function 0 "TI PCIXX12 CardBus" rev 0x00: couldn't
map interrupt
"TI PCIXX12 FireWire" rev 0x00 at pci4 dev 4 function 1 not configured
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci4 dev 4 function 2
not configured
sdhc0 at pci4 dev 4 function 3 "TI PCIXX12 Secure Data" rev 0x00: irq 10
sdmmc0 at sdhc0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK8037GSX>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-850S, 1.90> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: irq 11
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384
pcic0 controller 0: <Intel 82365SL rev 2> has sockets A and B
pcic0 controller 1: <Intel 82365SL rev 2> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcic_wait_ready: ready never happened, status = 4c
pccom3 at pcmcia0 function 0: can't allocate i/o space
pcmcia1 at pcic0 controller 0 socket 1
pcmcia2 at pcic0 controller 1 socket 0
pcic_wait_ready: ready never happened, status = 4c
pccom4 at pcmcia2 function 0: can't allocate i/o space
pcmcia3 at pcic0 controller 1 socket 1
pcic0: irq 3, polling enabled
biomask eff5 netmask eff5 ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
diff dmesg.i386.CardInsertedPriorToBoot dmesg.i386.CardInsertedAfterLogin:
90,91d89
< pcic_wait_ready: ready never happened, status = 4c
< pccom3 at pcmcia0 function 0: can't allocate i/o space
94,95d91
< pcic_wait_ready: ready never happened, status = 4c
< pccom4 at pcmcia2 function 0: can't allocate i/o space
102a99,100
> pcic_wait_ready: ready never happened, status = 4c
> pccom3 at pcmcia0 function 0: can't allocate i/o space
