Hello all!
I have a Sharp MP30 notebook that won't boot on OpenBSD/i386. I am
unsure if my situation is a bug or unsupported hardware. The issue
seems to be the CPU. It is a Transmeta Efficeon processor at 1.60 GHz.
The processor is supposedly Pentium Pro (686) compatible.
Below are two console outputs. The first is the console output for an
attempt to boot the system from a -current install42.iso as of a week
or so ago. Naturally since it never gets past the CPU, it isn't very
lengthy. The second is the dmesg from the same system booting
NetBSD/i386, purely for purposes of system hardware information. By
attaching this I am not making a qualitative judgement in any
form, nor am I implying that just because the system will boot NetBSD,
it should also boot OpenBSD. With that out of the way, we proceed:
/* begin 1 */
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.2-current (RAMDISK_CD) #539: Thu Nov 15 19:28:35 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Transmeta Efficeon(tm) Processor TM8000 ("GenuineTMx86" 386-
class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,ACPI,MMX,FXSR,SSE,SSE2,SS,TM
NOTICE: this kernel does not support i386 CPU class
panic: no appropriate CPU class available
The operating system has halted.
Please press any key to reboot.
/* end 1 */
/* begin 2 */
NetBSD 3.1 (GENERIC) #0: Tue Oct 31 04:27:07 UTC 2006
[EMAIL PROTECTED]:/home/builds/ab/netbsd-3-1-
RELEASE/i386/200610302053Z-obj/home/builds/ab/netbsd-3-1-
RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 486 MB
avail memory = 467 MB
BIOS32 rev. 0 found at 0xfd740
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Transmeta Pentium Pro compatible (686-class), 1599.91 MHz, id
0xf24
cpu0: features 2fcbf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 2fcbf9ff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX>
cpu0: features 2fcbf9ff<FXSR,SSE,SSE2,B27,LONG>
cpu0: "Transmeta Efficeon(tm) Processor TM8000"
cpu0: running without thermal monitor!
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Transmeta product 0x0060 (rev. 0x00)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: Transmeta product 0x0061 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M7 LW
(AGP) (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb1 at pci0 dev 2 function 0: Acer Labs M5249 Hypertransport to PCI
bridge (rev. 0x00)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
pcib0 at pci0 dev 3 function 0
pcib0: Acer Labs M1563 PCI-ISA Bridge (rev. 0x20)
Acer Labs M7101 Power Management Controller (miscellaneous bridge) at
pci0 dev 3 function 1 not configured
auacer0 at pci0 dev 4 function 0: Acer Labs M5455 Audio controller
auacer0: interrupting at irq 7
auacer0: ac97: Avance Logic ALC202 codec; headphone, 20 bit DAC, 18
bit ADC, Realtek 3D
auacer0: ac97: ext id 607<AC97_22,AMAP,SPDIF,DRA,VRA>
audio0 at auacer0: full duplex, mmap, independent
Acer Labs product 0x5457 (modem communications, revision 0x10) at pci0
dev 4 function 1 not configured
ath0 at pci0 dev 6 function 0
ath0: interrupting at irq 3
ath0: mac 5.9 phy 4.3 5ghz radio 4.6
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
cbb0 at pci0 dev 9 function 0: Ricoh 5C475 PCI-CardBus bridge (rev.
0x81)
cbb0: NOT USED because of unconfigured interrupt
rtk0 at pci0 dev 10 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at irq 5
rtk0: Ethernet address 08:00:1f:c3:0f:52
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
aceride0 at pci0 dev 14 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc5)
aceride0: bus-master DMA support present
aceride0: primary channel configured to compatibility mode
aceride0: primary channel interrupting at irq 14
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to compatibility mode
aceride0: secondary channel interrupting at irq 15
atabus1 at aceride0 channel 1
ohci0 at pci0 dev 15 function 0: Acer Labs M5237 USB 1.1 Host
Controller (rev. 0x03)
ohci0: interrupting at irq 3
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 15 function 3: Acer Labs M5239 USB 2.0 Host
Controller (rev. 0x01)
ehci0: interrupting at irq 10
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controller, 2 ports each: ohci0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: Acer Labs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: single transaction translator
uhub1: 6 ports with 6 removable, self powered
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
pcic0: controller 0 (Intel 82365SL Revision 1) has socket A only
pcmcia0 at pcic0 controller 0 socket 0
isapnp0: no ISA Plug 'n Play devices found
pcic0: controller 0 detecting irqs with mask 0xdeb8: none
pcic0: no available irq; polling for socket events
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <FUJITSU MHT2040AT SP>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100)
(using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <UJDA765 DVD/CDRW, , 1.00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33)
(using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
/* end 2 */
Thank you for your help,
Anders.
