Hello,
I'm using an external usb2 freecom toughdrive 250gb see:
http://www.freecom.com/ecproduct_detail.asp?ID=3506&CatID=8020&sCatID=1146187&ssCatID=1146191
The drive has "no" power supply!
I have some strange results while working with current.
When the drive is plugged into a running system, the drive is not
attached. Here is the error output:
Nov 27 13:17:48 amd64 /bsd: umass1 at uhub0
Nov 27 13:17:48 amd64 /bsd: port 4 configuration 1 interface 0 "Freecom
Freecom ToughDrivePro" rev 2.00/0.00 addr 2
Nov 27 13:17:48 amd64 /bsd: umass1: using SCSI over Bulk-Only
Nov 27 13:17:53 amd64 /bsd: umass1: Get Max Lun failed: TIMEOUT
Nov 27 13:17:53 amd64 /bsd: umass1: unable to get Max Lun: TIMEOUT
The drive only works when it is attached to the system while loading
the openbsd kernel during a standard boot.
(I hope I made myself clear, otherwise, here is the sequence:
1) connect the usb drive
2) reboot openbsd
3) now the drive is recognized and attached.)
Detaching and reattaching the usb drive afterwards gives the same error
results as mentionned previously.
(I tried the same drive on the same hardware with windows xp installed
and it worked without problems.)
Thanks a lot!
Didier
Here is a dmesg with the drive attached while booting the os:
OpenBSD 4.2-current (GENERIC.MP) #2: Tue Nov 27 09:58:52 CET 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3201396736 (3053MB)
avail mem = 3093200896 (2949MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe2d00 (38 entries)
bios0: vendor Intel Corp. version "CO96510J.86A.5975.2007.1010.1807" date
10/10/2007
bios0: PRIMINFO UNLOCK INSTALL
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP APIC WDDT MCFG ASF! SSDT SSDT SSDT SSDT SSDT TCPA
acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S4) UAR2(S4) ILAN(S4) PEGP(S4)
PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3)
UHC3(S3) UHC4(S3) EHCI(S3) EHC2(S3) UH42(S3) UHC5(S3) AZAL(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz, 1865.05 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz, 1864.80 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu1: 4MB 64b/line 16-way L2 cache
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 7 (P32_)
acpiprt2 at acpi0: bus 2 (PEX0)
acpiprt3 at acpi0: bus 3 (PEX1)
acpiprt4 at acpi0: bus 4 (PEX2)
acpiprt5 at acpi0: bus 5 (PEX3)
acpiprt6 at acpi0: bus 6 (PEX4)
acpiprt7 at acpi0: bus -1 (PEX5)
acpicpu0 at acpi0: FVS, 1862, 1596 MHz
acpicpu1 at acpi0: FVS, 1862, 1596 MHz
acpibtn0 at acpi0: SLPB
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel 82Q963 Host" rev 0x02
agp0 at pchb0: can't find internal VGA device config space
ppb0 at pci0 dev 1 function 0 "Intel 82Q963 PCIE" rev 0x02: apic 2 int 16 (irq
255)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 7300 LE" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82Q963 HECI" rev 0x02 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel 82Q963 PT IDER" rev 0x02: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 2 int 18 (irq 9) for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel 82Q963 KT" rev 0x02 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP AMT" rev 0x02: apic 2 int 20 (irq
11), address 00:19:d1:69:cb:c1
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 16 (irq
11)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21 (irq
9)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 18 (irq
9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: apic 2 int
22 (irq 10)
azalia0: codec[s]: Sigmatel STAC7618
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: apic 2 int 17 (irq
255)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: apic 2 int 16 (irq
255)
pci3 at ppb2 bus 3
pciide1 at pci3 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb1: DMA
(unsupported), channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide1: using apic 2 int 17 (irq 10) for native-PCI interrupt
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD-ROM SH-D162C, TS05> SCSI0 5/cdrom
removable
atapiscsi1 at pciide1 channel 0 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <TSSTcorp, CD/DVDW SH-S182D, SB05> SCSI0 5/cdrom
removable
pciide1: channel 1 ignored (not responding; disabled or no drives?)
ppb3 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x02: apic 2 int 18 (irq
255)
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x02: apic 2 int 19 (irq
255)
pci5 at ppb4 bus 5
ppb5 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: apic 2 int 17 (irq
255)
pci6 at ppb5 bus 6
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 23 (irq
11)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 19 (irq
11)
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 18 (irq
9)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 23 (irq
11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xf2
pci7 at ppb6 bus 7
"TI TSB43AB22 FireWire" rev 0x00 at pci7 dev 3 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801HO LPC" rev 0x02
pciide2 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide2: using apic 2 int 19 (irq 11) for native-PCI interrupt
wd0 at pciide2 channel 0 drive 0: <SAMSUNG HD321KJ>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 2 int 21
(irq 9)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem2 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-5300CL5
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5
pciide3 at pci0 dev 31 function 5 "Intel 82801H SATA" rev 0x02: DMA, channel 0
wired to native-PCI, channel 1 wired to native-PCI
pciide3: using apic 2 int 19 (irq 11) for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
umass0 at uhub1 port 6 configuration 1 interface 0 "JMicron USB to ATA/ATAPI
Bridge" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd0 at scsibus2 targ 1 lun 0: <, , > SCSI2 0/direct fixed
sd0: drive offline
umass1 at uhub0 port 4 configuration 1 interface 0 "Freecom Freecom
ToughDrivePro" rev 2.00/0.00 addr 2
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets
sd1 at scsibus3 targ 1 lun 0: <SAMSUNG, HM250JI, 0-08> SCSI2 0/direct fixed
sd1: 238475MB, 30401 cyl, 255 head, 63 sec, 512 bytes/sec, 488397168 sec total
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB-PS/2 Optical
Mouse" rev 2.00/11.10 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
ugen0 at uhub2 port 1 "Gemplus USB SmartCard Reader" rev 1.10/1.00 addr 2
softraid0 at root
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: sd1 matches BIOS drive 0x81
root on wd0a swap on wd0b dump on wd0b
