Hi,
I got my 4 port serial card and installed it in my firewall today
puc0 at pci1 dev 0 function 0 "Oxford OX16PCI954" rev 0x00: ports: 4 com
pccom3 at puc0 port 0 irq 11: st16650, 32 byte fifo
pccom3: probed fifo depth: 16 bytes
pccom4 at puc0 port 1 irq 11: st16650, 32 byte fifo
pccom4: probed fifo depth: 16 bytes
pccom5 at puc0 port 2 irq 11: st16650, 32 byte fifo
pccom5: probed fifo depth: 16 bytes
pccom6 at puc0 port 3 irq 11: st16650, 32 byte fifo
pccom6: probed fifo depth: 16 bytes
puc1 at pci1 dev 0 function 1 "Oxford Exsys EX-41098" rev 0x00: ports: 4 com
pccom7 at puc1 port 0 irq 5: ns16450, no fifo
pccom8 at puc1 port 1 irq 5: ns16450, no fifo
pccom9 at puc1 port 2 irq 5: ns16450, no fifo
pccom10 at puc1 port 3 irq 5: ns16450, no fifo
I'm using a null modem cable to connect another server to the serial
card's pigtail but when I try to connect to the remote server with tip
or cu, all I get is "Connected". At that point I can ~^D and ~^v and
that's about it.
Connected
~v
beautify true
baudrate 9600
dialtimeout 60
eofread
eofwrite
eol
escape ~
exceptions
force \020
framesize 1024
host cu9600
log /var/log/aculog
phones
prompt \012
raise false
raisechar \000
record
remote
script false
tabexpand false
verbose false
SHELL /bin/ksh
HOME /home/jross
echocheck false
disconnect
tandem true
linedelay 0
chardelay 0
etimeout 0
rawftp false
halfduplex false
localecho false
parity none
hardwareflow false
linedisc 0
direct true
Is there a way I can see on the remote system if indeed I'm connecting?
If I connect one server directly to the one external serial port on the
firewall with a null modem cable I can connect with cu no problem, and I
have full control.
I'd appreciate any suggestions.
Thanks!
Jeff Ross
full dmesg
OpenBSD 4.2-current (GENERIC) #5: Fri Nov 16 19:34:39 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 802 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 535261184 (510MB)
avail mem = 509726720 (486MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/17/00, BIOS32 rev. 0 @ 0xfdb80,
SMBIOS rev. 2.3 @ 0xf0640 (132 entries)
bios0: vendor American Megatrends Inc. version "0700xx" date 11/17/00
bios0: Supermicro 370SSR/370SSE
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3810/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82815 Graphics" rev 0x02: aperture
at 0xf8000000, size 0x4000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x01
pci1 at ppb0 bus 1
puc0 at pci1 dev 0 function 0 "Oxford OX16PCI954" rev 0x00: ports: 4 com
pccom3 at puc0 port 0 irq 11: st16650, 32 byte fifo
pccom3: probed fifo depth: 16 bytes
pccom4 at puc0 port 1 irq 11: st16650, 32 byte fifo
pccom4: probed fifo depth: 16 bytes
pccom5 at puc0 port 2 irq 11: st16650, 32 byte fifo
pccom5: probed fifo depth: 16 bytes
pccom6 at puc0 port 3 irq 11: st16650, 32 byte fifo
pccom6: probed fifo depth: 16 bytes
puc1 at pci1 dev 0 function 1 "Oxford Exsys EX-41098" rev 0x00: ports: 4 com
pccom7 at puc1 port 0 irq 5: ns16450, no fifo
pccom8 at puc1 port 1 irq 5: ns16450, no fifo
pccom9 at puc1 port 2 irq 5: ns16450, no fifo
pccom10 at puc1 port 3 irq 5: ns16450, no fifo
fxp0 at pci1 dev 4 function 0 "Intel 8255x" rev 0x08, i82559: irq 11,
address 00:30:48:10:7c:77
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci1 dev 8 function 0 "Intel 82562" rev 0x01, i82562: irq 11,
address 00:30:48:11:0f:ef
inphy1 at fxp1 phy 1: i82562EM 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x01: 24-bit
timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD204BA>
wd0: 16-sector PIO, LBA, 19470MB, 39876480 sectors
wd1 at pciide0 channel 0 drive 1: <WDC WD2000JB-00GVA0>
wd1: 16-sector PIO, LBA48, 190782MB, 390721968 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-ROM CR-176, 6TCW> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x01: irq 7
ichiic0 at pci0 dev 31 function 3 "Intel 82801BA SMBus" rev 0x01: irq 5
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 256MB SDRAM non-parity PC133CL3
spdmem1 at iic0 addr 0x51: 128MB SDRAM non-parity PC133CL2
spdmem2 at iic0 addr 0x52: 128MB SDRAM non-parity PC133CL2
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x01: irq 10
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask e7e5 netmask efe5 ttymask ffe7
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a swap on wd0b dump on wd0b
