On Nov 29, 2007 3:04 PM, Rob Lytle <[EMAIL PROTECTED]> wrote:
>
> On Nov 29, 2007 12:27 PM, Rob Lytle <[EMAIL PROTECTED]> wrote:
> > Hi all,
> >
> > I cvsup'd today and saw that /usr/src/sys/dev/pci/pccbb.c had been
> > changed. I turned on all the bugging code I could, and I get in the
> > dmesg "cbb0: controller is missing".
> >
> > Yet right above it in the dmesg is says "cbb0 at pci6 dev 4 function 0
> > "TIPCIXX12 Cardbus...."
> >
> > I was wondering if there is something special about my laptop so that
> > OpenBSD can't support cardbus and pcmcia?
> > PCMCIA cards work fine in FreeBSD and Vista.
> >
> > Sincerely, Rob dmesg below
> > ----------------------------------------------------------------------------------------------
> >
> > OpenBSD 4.2-current (ROBKERN2) #0: Thu Nov 29 04:06:38 PST 2007
> > OpenBSD 4.2-current (ROBKERN2) #0: Thu Nov 29 04:06:38 PST 2007
> > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/ROBKERN2
> > cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class)
> > 2.01 GHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,S
> > BF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
> > real mem = 2145415168 (2046MB)
> > avail mem = 2067042304 (1971MB)
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 04/12/07, BIOS32 rev. 0 @
> > 0xfdbd0, SMBIOS rev. 2.4 @ 0xdc010 (19 entries)
> > bios0: vendor Phoenix Technologies LTD version "R0112N0" date 04/12/2007
> > bios0: Sony Corporation VGN-SZ460N
> > pcibios0 at bios0: rev 2.1 @ 0xfdbd0/0x430
> > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde80/352 (20 entries)
> > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> > pcibios0: PCI bus #10 is the last bus
> > bios0: ROM list: 0xc0000/0xf000 0xdc000/0x4000! 0xe0000/0x1c00!
> > acpi0 at mainbus0: rev 2
> > acpi0: tables DSDT FACP APIC HPET MCFG TCPA SLIC APIC BOOT SSDT SSDT
> > SSDT SSDT SSDT
> > acpi0: wakeup devices PWRB(S4) S1F0(S4) S1F1(S4) S1F2(S4) S1F3(S4)
> > S1F4(S4) S1F5(S4) S1F6(S4) S1F7(S4) TLAN(S3) DLAN(S3) U
> > SB1(S3) USB2(S3) USB3(S3) USB4(S3) USB7(S3) SLT0(S4) EC0_(S5)
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpihpet0 at acpi0: 14318179 Hz
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus 1 (PEGP)
> > acpiprt2 at acpi0: bus 2 (RP01)
> > acpiprt3 at acpi0: bus 6 (RP02)
> > acpiprt4 at acpi0: bus 7 (RP03)
> > acpiprt5 at acpi0: bus 8 (RP04)
> > acpiprt6 at acpi0: bus 9 (PCIB)
> > acpiec0 at acpi0
> > acpicpu0 at acpi0: C2
> > acpitz0 at acpi0: critical temperature 99 degC
> > acpitz1 at acpi0: critical temperature 100 degC
> > acpitz2 at acpi0: critical temperature 100 degC
> > acpibtn0 at acpi0: LID0
> > acpibtn1 at acpi0: PWRB
> > acpibat0 at acpi0: BAT1 type LION oem "Sony Corp."
> > acpiac0 at acpi0: AC unit online
> > acpidock at acpi0 not configured
> > cpu0 at mainbus0
> > cpu0: unknown Enhanced SpeedStep CPU, msr 0x060b0c2206000c22
> > cpu0: using only highest and lowest power states
> > cpu0: Enhanced SpeedStep 2000 MHz (1244 mV): speeds: 2000, 1000 MHz
> > pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> > pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
> > agp at pchb0 not configured
> > ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03: irq 5
> > pci1 at ppb0 bus 1
> > vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x01d8 rev
> > 0xa1
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: irq 10
> > azalia0: codec[s]: Sigmatel 83847661, Conexant/0x2bfa, using Sigmatel
> > 83847661
> > audio0 at azalia0
> > ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: irq 5
> > pci2 at ppb1 bus 2
> > ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: irq 10
> > pci3 at ppb2 bus 6
> > wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
> > irq 10, MoW1, address 00:19:d2:31:93:15
> > ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: irq 10
> > pci4 at ppb3 bus 7
> > mskc0 at pci4 dev 0 function 0 "Marvell Yukon 88E8036" rev 0x16,
> > Yukon-2 FE (0x1): irq 10
> > msk0 at mskc0 port A: address 00:13:a9:90:7c:69
> > eephy0 at msk0 phy 0: Marvell 88E3082 10/100 PHY, rev. 3
> > ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: irq 10
> > pci5 at ppb4 bus 8
> > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: irq 10
> > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: irq 10
> > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: irq 10
> > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: irq 10
> > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: irq 10
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> > pci6 at ppb5 bus 9
> > cbb0 at pci6 dev 4 function 0 "TI PCIXX12 CardBus" rev 0x00 (chipflags
> > 2)cbb0: socket base address 0x7ff00000
> > : intrpin A, intrtag 255
> > : irq 10
> > "TI PCIXX12 FireWire" rev 0x00 at pci6 dev 4 function 1 not configured
> > "TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci6 dev 4 function 2
> > not configured
> > cbb0: controller is missing
> > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
> > disabled
> > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
> > channel 0 configured to compatibility, channel 1 conf
> > igured to compatibility
> > atapiscsi0 at pciide0 channel 0 drive 0
> > scsibus0 at atapiscsi0: 2 targets
> > cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-852S, 1.50> SCSI0
> > 5/cdrom removable
> > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> > pciide0: channel 1 ignored (disabled)
> > pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
> > channel 0 configured to native-PCI, channel 1 confi
> > :
> >
> > --
> > "Emancipate yourself from mental slavery, none but ourselves can free
> > our minds" Bob Marley, Redemption Song
> >
>
> More information. Via other OS's I found that the name of the
> Cardbus controller is TI 8x12,7x12,6x12. Certainly there must be an
> actual part number. I will check on the TI website, but thats about
> all that I can do I'm afraid.
>
> Sincerely, Rob.
Hi, the real part number is TI-8x12/7x12/6x12 for the Cardbus controller.
But I can't find it on the TI website.
Rob.
--
"Emancipate yourself from mental slavery, none but ourselves can free
our minds" Bob Marley, Redemption Song
